MUR160-E3/73 - Vishay [General Semiconductor]

Document Number: 88684 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 22-Oct-09 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1

Ultrafast Plastic Rectifier

MUR140, MUR160

Vishay General Semiconductor

New Product

FEATURES

• Glass passivated chip junction

• Ultrafast reverse recovery time

• Low forward voltage drop

• Low leakage current

• Low switching losses, high efficiency

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Compliant to RoHS directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

TYPICAL APPLICATIONS

For use in high frequency rectification and freewheeling

application in switching mode converters and inverters for

consumer, computer and telecommunication.

MECHANICAL DATA

Case: DO-204AC (DO-15)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS compliant, commercial grade

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 400 V, 600 V

IFSM 35 A

trr 50 ns

VF1.05 V

TJ max. 175 °C

DO-204AC (DO-15)

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MUR140 MUR160 UNIT

Maximum repetitive peak reverse voltage VRRM 400 600 V

Working peak reverse voltage VRWM 400 600 V

Maximum DC blocking voltage VDC 400 600 V

Maximum average forward rectified current at TA = 120 °C IF(AV) 1.0 A

Peak forward surge current 8.3 ms single half sine-wave

superimposed on rated load IFSM 35 A

Operating junction and storage temperature range TJ, TSTG - 65 to + 175 °C

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88684

2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 22-Oct-09

MUR140, MUR160

Vishay General Semiconductor

New Product

Note

(1) Pulse test: 300 μs pulse width, duty cycle ≤ 2 %

Note

(1) Lead length = 3/8" on P.C.B. with 1.5" x 1.5" (38.1 mm x 38.1 mm) copper surface

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL MUR140 MUR160 UNIT

Maximum instantaneous

forward voltage IF = 1.0 A

TJ = 25 °C

VF (1) 1.25

TJ = 150 °C 1.05

Maximum instantaneous

reverse current at rated DC

blocking voltage

TJ = 25 °C

IR (1) 5.0

μA

TJ = 150 °C 150

Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns

Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs,

VR = 30 V, Irr = 10 % IRM trr 75 ns

Maximum forward recovery time IF = 1.0 A, dI/dt = 100 A/μs,

recovery to 1.0 V tfr 50 ns

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MUR140 MUR160 UNIT

Typical thermal resistance, junction to ambient RθJA (1) 50 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

MUR160-E3/54 0.41 54 4000 13" diameter paper tape and reel

MUR160-E3/73 0.41 73 2000 Ammo pack packaging

2.0

3.0

025 50 75 100 125 150 175

1.0

Average Forward Rectied Current (A)

Ambient Temperature (°C)

P.C.B. with 1.5" x 1.5"

(38.1 mm x 38.1 mm)

Copper Pads

L = 3/8"

1 10010

Number of Cycles at 50 Hz

Peak Forward Surge Current (A)

Document Number: 88684 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 22-Oct-09 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3

MUR140, MUR160

Vishay General Semiconductor

New Product

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Leakage Characteristics

Fig. 5 - Typical Junction Capacitance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.01

0.1

100

1.00.80.60.40.2 1.2 1.4 1.6 1.8

Instantaneous Forward Current (A)

Instantaneous Forward Voltage (V)

TJ = 150 °C

TJ = 25 °C

TJ = 175 °C

0.01

0.1

100

1000

0 20406080100

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Leakage

Current (μA)

TJ = 150 °C

TJ = 25 °C

TJ = 175 °C

0.1 1

100

Reverse Voltage (V)

Junction Capacitance (pF)

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

DO-204AC (DO-15)

0.034 (0.86)

0.028 (0.71)

DIA.

0.140 (3.6)

0.104 (2.6)

DIA.

1.0 (25.4)

MIN.

0.300 (7.6)

0.230 (5.8)

1.0 (25.4)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.