BCR196... PNP Silicon Digital Transistor * Switching circuit, inverter, interface circuit, driver circuit * Built in bias resistor (R1 = 47k , R2 = 22k ) * Pb-free (RoHS compliant) package 1) * Qualified according AEC Q101 BCR196/F BCR196W C 3 R1 R2 1 B 2 E EHA07183 Type Marking BCR196 WXs 1=B 2=E 3=C - - - SOT23 BCR196F WXs 1=B 2=E 3=C - - - TSFP-3 BCR196W WXs 1=B 2=E 3=C - - - SOT323 1Pb-containing Pin Configuration Package package may be available upon special request Maximum Ratings Parameter Symbol Collector-emitter voltage VCEO 50 Collector-base voltage VCBO 50 Input forward voltage Vi(fwd) 80 Input reverse voltage Vi(rev) 10 Collector current IC 70 Total power dissipation- Ptot Value 200 BCR196F, TS 128C 250 BCR196W, TS 124C 250 Tj Storage temperature Tstg 1 http://store.iiic.cc/ V mA mW BCR196, TS 102C Junction temperature Unit 150 C 150 ... -65 2007-07-24 BCR196... Thermal Resistance Parameter Junction - soldering point1) Symbol RthJS Value BCR196 240 BCR196F 90 BCR196W 105 Unit K/W Electrical Characteristics at TA = 25C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 50 V IC = 100 A, IB = 0 Collector-base breakdown voltage V(BR)CBO 50 - - I CBO - - 100 nA I EBO - - 220 A h FE 50 - - - - - 0.3 V Vi(off) 1.2 - 2.6 Vi(on) 1.5 - 4 Input resistor R1 32 47 62 Resistor ratio R1/R 2 1.92 2.14 2.36 fT - 150 - MHz Ccb - 3 - pF IC = 10 A, IE = 0 Collector-base cutoff current VCB = 40 V, IE = 0 Emitter-base cutoff current VEB = 10 V, IC = 0 DC current gain2) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage2) VCEsat IC = 10 mA, IB = 0,5 mA Input off voltage IC = 100 A, VCE = 5 V Input on voltage IC = 2 mA, VCE = 0,3 V k - AC Characteristics Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1For calculation of RthJA please refer to Application Note Thermal Resistance 2Pulse test: t < 300s; D < 2% 2 http://store.iiic.cc/ 2007-07-24 BCR196... DC current gain hFE = (IC) VCE = 5 V (common emitter configuration) Collector-emitter saturation voltage VCEsat = (IC), IC/IB = 20 10 3 0.5 V V CEsat h FE 0.4 10 2 0.35 0.3 0.25 0.2 10 1 -40 C -25 C 25 C 85 C 125 C -40 C -25 C 25 C 85 C 125 C 0.15 0.1 0.05 10 0 -4 10 10 -3 10 -2 A 10 0 -3 10 -1 10 -2 A 10 IC IC Input off voltage V i(off) = (IC) VCE = 5V (common emitter configuration) 10 2 10 2 V V -40 C -25 C 25 C 85 C 125 C Vi(off) Vi(on) Input on Voltage Vi(on) = (IC ) VCE = 0.3V (common emitter configuration) 10 1 10 0 10 -1 -5 10 -1 10 1 -40 C -25 C 25 C 85 C 125 C 10 0 10 -4 10 -3 10 -2 A 10 10 -1 -5 10 -1 IC 10 -4 10 -3 10 -2 A 10 -1 IC 3 http://store.iiic.cc/ 2007-07-24 BCR196... Total power dissipation Ptot = (TS) BCR196 Total power dissipation Ptot = (TS) BCR196F 300 300 mW 250 250 225 225 200 200 P tot P tot mW 175 175 150 150 125 125 100 100 75 75 50 50 25 25 0 0 15 30 45 60 75 90 105 120 C 0 0 150 TS 15 30 45 60 75 90 105 120 C 150 TS Total power dissipation Ptot = (TS) BCR196W 300 mW 250 Ptot 225 200 175 150 125 100 75 50 25 0 0 15 30 45 60 75 90 105 120 C 150 TS 4 http://store.iiic.cc/ 2007-07-24 BCR196... Permissible Pulse Load RthJS = (tp ) BCR196 Permissible Pulse Load Ptotmax/P totDC = (tp) BCR196 10 3 10 3 P totmax / P totDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp Permissible Pulse Load BCR196F Ptotmax/P totDC = (tp) BCR196F 10 2 0 10 0 10 3 Ptotmax /PtotDC K/W RthJS 10 tp Permissible Puls Load RthJS = (tp) D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 10 0 10 -1 -6 10 s 10 -5 10 -4 10 -3 10 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 5 http://store.iiic.cc/ 2007-07-24 BCR196... Permissible Puls Load RthJS = (tp) Permissible Pulse Load BCR196W Ptotmax/P totDC = (tp) BCR196W 10 3 10 3 P totmax / P totDC K/W R thJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 6 http://store.iiic.cc/ 2007-07-24 Package SOT23 BCR196... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 0.1 1 2.4 0.15 3 0.1 MAX. 10 MAX. B 1 0.1 10 MAX. 2.9 0.1 0.15 MIN. Package Outline A 5 0...8 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 7 http://store.iiic.cc/ 2007-07-24 Package SOT323 BCR196... Package Outline 0.9 0.1 2 0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 0.1 0.1 MIN. 2.1 0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 8 http://store.iiic.cc/ 2007-07-24 Package TSFP-3 BCR196... Package Outline 0.2 0.05 0.55 0.04 1 1.2 0.05 0.2 0.05 3 2 0.2 0.05 10 MAX. 0.8 0.05 1.2 0.05 0.15 0.05 0.4 0.05 0.4 0.05 Foot Print 1.05 0.45 0.4 0.4 0.4 Marking Layout (Example) Manufacturer BCR847BF Type code Pin 1 Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 4 0.2 1.2 1.5 8 0.3 Pin 1 0.7 1.35 9 http://store.iiic.cc/ 2007-07-24 BCR196... Edition 2006-02-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 10 http://store.iiic.cc/ 2007-07-24