SPICE MODELS: ES3A ES3B ES3C ES3D ES3AB ES3BB ES3CB ES3DB ES3A/AB - ES3D/DB 3.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features * * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 100A Peak B Dim Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 4) A C SMB SMC Min Max Min Max A 3.30 3.94 5.59 6.22 B 4.06 4.57 6.60 7.11 Mechanical Data C 1.96 2.21 2.75 3.18 * * D 0.15 0.31 0.15 0.31 * * * * * * * * Case: SMB/SMC D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 J E 5.00 5.59 7.75 8.13 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 2.00 2.62 2.00 2.62 Moisture Sensitivity: Level 1 per J-STD-020C G E H Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 J All Dimensions in mm Polarity: Cathode Band or Cathode Notch Mounting Position: Any A, B, C, D, Suffix Designates SMC Package AB, BB, CB, DB Suffix Designates SMB Package Ordering Information: See Page 3 Marking: Type Number, See Page 3 SMB Weight: 0.093 grams (approximate) SMC Weight: 0.21 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol ES3A/AB ES3B/BB ES3C/CB ES3D/DB Unit VRRM VRWM VR 50 100 150 200 V VR(RMS) 35 70 105 140 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 100 A Forward Voltage VFM 0.9 V IRM 10 500 mA Reverse Recovery Time (Note 3) trr 25 ns Typical Total Capacitance (Note 2) CT 45 pF RqJT 15 C/W Tj, TSTG -65 to +150 C Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage @ TT = 100C @ IF = 3.0A @ TA = 25C @ TA = 125C Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4 Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS14003 Rev. 10 - 2 1 of 3 www.diodes.com ES3A/AB - ES3D/DB a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 8.0 6.0 4.0 2.0 25 50 75 100 125 10 1.0 0.1 0.01 0 175 150 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 120 IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 0.4 Single Half-Sine-Wave (JEDEC Method) 100 80 60 40 20 1000 Tj = 125 C 100 10 Tj = 25 C 1.0 0 1 10 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS14003 Rev. 10 - 2 2 of 3 www.diodes.com ES3A/AB - ES3D/DB Ordering Information (Note 5) Device* Packaging Shipping ES3x-13-F ES3xB-13-F SMC SMB 3000/Tape & Reel 3000/Tape & Reel * x = Device type, e.g. ES3A-13-F (SMC package); ES3AB-13-F (SMB package). Notes: 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW XXXX(X) XXX = Product type marking code, ex: ES3A (SMC package) XXXX = Product type marking code, ex: ES3AB (SMB package) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the express written approval of Diodes Incorporated. DS14003 Rev. 10 - 2 3 of 3 www.diodes.com ES3A/AB - ES3D/DB