DS14003 Rev. 10 - 2 1 of 3 ES3A/AB - ES3D/DB
www.diodes.com ãDiodes Incorporated
ES3A/AB - ES3D/DB
3.0A SURFACE MOUNT SUPER-FAST RECTIFIER
Features
Dim SMB SMC
Min Max Min Max
A3.30 3.94 5.59 6.22
B4.06 4.57 6.60 7.11
C1.96 2.21 2.75 3.18
D0.15 0.31 0.15 0.31
E5.00 5.59 7.75 8.13
G0.10 0.20 0.10 0.20
H0.76 1.52 0.76 1.52
J2.00 2.62 2.00 2.62
All Dimensions in mm
A
B
C
D
G
H
E
J
A, B, C, D, Suffix Designates SMC Package
AB, BB, CB, DB Suffix Designates SMB Package
·Glass Passivated Die Construction
·Super-Fast Recovery Time For High Efficiency
·Low Forward Voltage Drop and High Current Capability
·Surge Overload Rating to 100A Peak
·Ideally Suited for Automated Assembly
·Lead Free Finish/RoHS Compliant (Note 4)
Mechanical Data
·Case: SMB/SMC
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208
·Polarity: Cathode Band or Cathode Notch
·Mounting Position: Any
·Ordering Information: See Page 3
·Marking: Type Number, See Page 3
·SMB Weight: 0.093 grams (approximate)
·SMC Weight: 0.21 grams (approximate)
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Notes: 1. Unit mounted on PC board with 5.0 mm2(0.013 mm thick) copper pads as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF= 0.5A, IR= 1.0A, Irr = 0.25A. See Figure 5.
4 RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.
Characteristic Symbol ES3A/AB ES3B/BB ES3C/CB ES3D/DB Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 150 200 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 V
Average Rectified Output Current @ TT= 100°CIO3.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
(JEDEC Method)
IFSM 100 A
Forward Voltage @ IF= 3.0A VFM 0.9 V
Peak Reverse Current @ TA= 25°C
at Rated DC Blocking Voltage @ TA= 125°CIRM 10
500 mA
Reverse Recovery Time (Note 3) trr 25 ns
Typical Total Capacitance (Note 2) CT45 pF
Typical Thermal Resistance, Junction to Terminal (Note 1) RqJT 15 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
SPICE MODELS: ES3A ES3B ES3C
ES3D ES3AB ES3BB ES3CB ES3DB
DS14003 Rev. 10 - 2 2 of 3 ES3A/AB - ES3D/DB
www.diodes.com
0
20
40
60
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fi
g
. 3 Sur
g
e Current Deratin
g
Curve
Single Half-Sine-Wave
(JEDEC Method)
80
100
120
1.0
10
100
0 40 80 120
I , INSTANTANEOUS REVERSE CURRENT (A)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
.4 T
y
pical Reverse Characteristics
T=125C
j
°
T=25C
j
°
1000
2.0
4.0
25 75 100
50 125 150 175
I , AVERAGE RECTIFIED CURRENT (A)
O
T , TERMINAL TEMPERATURE ( C)
Fi
g
. 1 Forward Current Deratin
g
Curve
T
°
6.0
8
.
0
50V DC
Approx
Oscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
trr
Set time base for 50/100 ns/cm
+0.5A
0A
-0.25A
-1.0A
Fi
g
. 5 Reverse Recover
y
Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
0.01
0.1
1.0
10
0 0.4 0.8 1.2 1.6
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
F
DS14003 Rev. 10 - 2 3 of 3 ES3A/AB - ES3D/DB
www.diodes.com
XXX = Product type marking code, ex: ES3A (SMC package)
XXXX = Product type marking code, ex: ES3AB (SMB package
)
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year ex: 2 for 2002
WW = Week code 01 to 52
YWW
XXXX(X)
Marking Information
* x = Device type, e.g. ES3A-13-F (SMC package); ES3AB-13-F (SMB package).
Notes: 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Device*Packaging Shipping
ES3x-13-F
ES3xB-13-F
SMC
SMB
3000/Tape & Reel
3000/Tape & Reel
Ordering Information (Note 5)
IMPORTANT NOTICE
LIFE SUPPORT
www.diodes.com
Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhance-
ments, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein;
neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such
use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
The products located on our website at are not recommended for use in life support systems where a failure or malfunction of the
component may directly threaten life or cause injury without the express written approval of Diodes Incorporated.
