Instruction Sheet
2IOM Series
I/O Module Boards 408--10044
(P&B 12C065)
LOC B
1of 4
E2010 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
08 JAN 2010 Rev B1393026- [ ]
1. INTRODUCTION
The table in Figure 1 references the 2IOM Series boards for Slim Line Input/Output Modules. Boldfaced 2IOM
Series numbers listed in Figure 1 are the more likely to be stocked by authorized distributors. The numbers in
brackets below are the associated Tyco Electronics part numbers. To the far right side are descriptions of
features pertaining to the I/O modules.
The 2IO Series boards are UL recognized and CSA certified for 125 maximum with 5A fuses; 250V maximum with #22
solid copper jumper wire instead of fuses.
File E61482
File LR15734
Be sure to thoroughly review the technical data before selecting a product part number. It is also recommended that
users seek out the pertinent approvals files of the agencies/laboratories and review them to be sure the product meets
the requirements for the given applications
Product [Tyco Electronics Part Number]
2IOM4A
[1393026- 7]
2IOM16
[1393026- 1]
2IOM16A
[1393026- 2]
2IOM24
[1393026- 4]
2IOM24D
[1393026- 5]
Description
416 16 24 24 Number of I/O Channels
416 16 24 24 Number of Module Positions
XXXXXField Terminals: Screw Terminals
X X Logic Terminals: Screw Terminals
X X X Logic Terminals: 50--pin card edge connector
XLogic Terminals: 50--pin straight header
Logic Terminals: 50--pin right--angle header
XWill accept 50--pin dual header
XXXXXDesigned for negative true logic; one logic voltage
Figure 1
The table in Figure 2 describes suggested mating
connectors and fuses.
Suggested Mating Connectors And Fuses
50--pin card edge connector 3M 3415--0001 (Or equivalent.)
50--pin header connector 7--1437021--4 (Or equivalent)
5ampfuse Littlefuse 251--005 (Or equivalent.)
7ampfuse* Littlefuse 251--007 (Or equivalent.)
1ampfuse** Littlefuse 251--001 (Or equivalent.)
Figure 2
* Used only on 24 and 32 position models.
** Used only on 2IOM4A and 2IOM16A boards.
2. DESCRIPTION
The dimensions on the drawings below are in
inches (with the millimeter equivalent in
parentheses).
These instructions include information about space
saving mounting boards for Slim Line Input/Output
Modules.
Figures 3, 4, 5, and 6 contain the outline dimensions
and schematics for the boards listed above.
NOTE
i
NOTE
i
NOTE
i
408- 10044
2IOM Series I/O Module Boards 1393026- [ ]
Rev B2 of 4 Tyco Electronics Corporation
Figure 3
2IOM4A Outline Dimensions
2IOM4A Schematic
Figure 4 (continued)
2IOM16 Outline Dimensions
3.2
408- 10044
2IOM Series I/O Module Boards 1393026- [ ]
3of 4Rev BTyco Electronics Corporation
Figure 4 (end)
2IOM16 Schematic
Figure 5
2IOM16A Outline Dimensions
2IOM16A Schematic
408- 10044
2IOM Series I/O Module Boards 1393026- [ ]
Rev B4 of 4 Tyco Electronics Corporation
Figure 6
2IOM24 and 2IOM24D Outline Dimensions
2IOM24 and 2IOM24D Schematic
3. REVISION SUMMARY
Since the previous release of this instruction sheet, the TE logo was changed.
