TE3-CHATT - Infineon Technologies

TE3-CHATT

PRODUCT BRIEF

Never stop thinking.

TE3-CHATT

PEB 3456 E

Applications

Channelized DS3 line cards at DS3

and higher bit rates

■Midrange Router

■Switches

■DSUs, CSUs, FRADs

General Features

■Supports a channelized DS3

linkwithadatarateof45MHz

■DS3 framer supports C-bit

parity format and M13 asyn-

chronous format

■M13 Multiplexer that maps

28 T1 signals or 21 E1 signals

(ITU-T G.747) into a channel-

ized DS3 signal

■28T1/21E1framerand

signaling controller

■Direct connection to DS3 line

interface unit or STS-1 mapper

■256 bidirectional channels can

be assigned arbitrarely to 28

links for HDLC, PPP or trans-

parent processing

■Supports DS0, fractional T1/E1

or T1/E1 channels

■Provides remote line loads on

DS1, DS2 and DS3 level

■Bit error rate tester can gener-

ate programmable pseudoran-

dom test patterns

■Master/slave µP interface con-

trols the layer one functions

■On-chip mailbox for communi-

cation between PCI subsystem

and local processor

■The system interface is PCI

V2.2 32 Bit running at 66 MHz

■FIFOs for DS1 and DS3

datalinks

Framer Aligner Features

■ITU-T G. 704 frame alignment/

synthesis for 2.048/1.544 kbit/s

■Detection of LOS (Red) Alarm,

Insertion&Extraction of Alarms

AIS, Remote (Yellow) Alarms

■Programmable frame formats:

E1: Double- & CRC Multiframe

T1: F4, SF (F12), ESF(F24)

Signaling Controller Features

■(F)DL-channel protocol for ESF

ANSI T1.403 / AT&T TR54016

■Bit Oriented Messages (BOM)

■TimeSlot0SA8 -4bit handling

via FIFOs

General

■JTAGboundaryscanaccording

to IEEE1149.1

■0.25 µm, 2.5 V core technology

■I/Osare3.3 V tolerantandhave

3.3 V driving capability

■P-BGA-388 package

■Temperature range of -40 °C to

+85 °C

Documentation and Support

Package

■Data Sheet

■Application Notes

■Evaluation System

EASY256/3456

■DS3 Reference Design

EASY3456-T3 with TE3-LIU

(PEB 3452)

Channelized T3 Termination with DS3

Framer, M13 Multiplexer, T1/E1

Framers and 256 Channel HDLC/PPP

Controller

The TE3-CHATT is a serial communication

controller which multiplexes up to 256 channels

into a channelized DS3 trunk.

The unique integration of T1/E1 framer, M13

Multiplexer and DS2/DS3 framer reduces the

layout complexity, saves cost and board space.

This makes the TE3-CHATT an optimized

solution for line cards at DS3 and higher bit rates,

where access to DSO/DS1 channels is needed.

Infineon's DS3 line interface unit, TE3-LIU

(PEB 3452), completes your linecard.

Market's lowest PCI bus load enables multiple

devices on the PCI bus, and maximizes the

system throughput.

www.infineon.com/t3

PRODUCT BRIEF

Howtoreachus:

http://www.infineon.com

Published by

Infineon Technologies AG,

St.-Martin-Strasse 53,

81541 München

Attention please!

Theinformationhereinisgiventodescribecertaincomponents

and shall not be considered as warranted characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not

limited to warranties of non-infringement, regarding circuits,

descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and

conditions and prices please contact your nearest

Infineon Technologies Office in Germany or our Infineon

Technologies Representatives worldwide.

Warnings

Dueto technicalrequirements componentsmay containdan-

gerous substances. For information on the types in question

please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-

supportdevicesorsystemswith the expresswrittenapproval

ofInfineon Technologies,ifa failureof such componentscan

reasonably be expected to cause the failure of that life-sup-

port device or system, or to affect the safety or effectiveness

ofthat device orsystem. Lifesupport devices orsystems are

intended to be implanted in the human body, or to support

and/ormaintain andsustain and/or protecthuman life.If they

fail, it is reasonable to assume that the health of the user or

other persons may be endangered.

Published by Infineon Technologies AG

TE3-CHATT

PEB 3456

HDLC/PPP

28T1/21E1 Framer

M13 + DS3 Framer

TE3-LIU

PEB 3452

DS3 LIU

Partially Channelized DS3 Line Card

LOCAL UBS

TE3-CHATT

Evaluation Board

Time-Slot (DS0)

Assigner

Protocol Machine

Buffer

Data Management

PCI2FPI

PCI Interface External Bus

Controller

Interrupt

Controller

FIFOs

Protocol

Machine Framer

Channelized (T1/E1) Interface

M13 + DS3 Framer

JTAG

32 Bit / 66 MHz PCI Local µP Interface

Target FPI BUS II

Target FPI Bus I

DS3 Receive / Transmit

Initiator FPI Bus

MBOX

Bridge

Global

Control

Infineon offers a complete

channelized DS3 line card

solution using the

TE3-LIU PEB 3452

together with the

TE3-CHATT (PEB 3456).

Please ask for the referring

reference design EASY3456-T3.

Availability

The TE3-CHATT device

is available with complete

documentation and support

package. A dedicated engineering

support team is there to assist you.

Please contact your local Infineon

office for further details.

Ordering No. B119-H7610-G1-X-7600

PrintedinGermany

PS 03013. NB

The EASY256/3456 is a PCI

based evaluation board.

Together with the low level

software driver, this complete

evaluation kit is speeding-up

your development process.

TE3-CHATT Block Diagram

The TE3-CHATT protocol machine handles HDLC, bit- and octet

synchronous PPP and a transparent mode. Rate adoption for time slot

transmission from 64 kbit/s down to 8 kbit/s and the concatenation of

time slots, supporting the ISDN H0, H11, H12 channels is supported. Your

software overhead is minimized due to the optimized descriptor structure well

known from the MUNICH predecessors and the SCC product family.

The integrated DS3 framer, M13 multiplexer and T1/E1 framer cover all impor-

tant specifications and allow a direct connection to a DS3 line interface unit.

TE3-CHATT Application Example