S1GHE3_AH - VISHAY - Pdf.Support

S1A, S1B, S1D, S1G, S1J, S1K, S1M

www.vishay.com Vishay General Semiconductor

Revision: 31-Jul-2018 1Document Number: 88711

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Glass Passivated Rectifier

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated pellet chip junction

• Low forward voltage drop

• Low leakage current

• High forward surge capability

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in general purpose rectification of power supplies,

inverters, converters and freewheeling diodes for consumer,

automotive, and telecommunication.

MECHANICAL DATA

Case: SMA (DO-214AC)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant and

AEC-Q101 qualified 

(“_X” denotes revision code e.g. A, B,.....)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3, M3, HE3, and HM3 suffix meets JESD 201 class 2

whisker test

Polarity: color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V, 100 V, 200 V, 400 V, 600 V,

800 V, 1000 V

IFSM 40 A, 30 A

EAS 5 mJ

IR1.0 μA, 5.0 μA

VF1.1 V

TJ max. 150 °C

Package SMA (DO-214AC)

Circuit configuration Single

SMA (DO-214AC)

Available

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT

Device marking code SA SB SD SG SJ SK SM

Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified current (fig. 1) IF(AV) 1.0 A

Peak forward surge current 8.3 ms single half sine-wave

superimposed on rated load IFSM 40 30 A

Non-repetitive peak reverse avalanche energy

at 25 °C, IAS = 1 A, L = 10 mH EAS 5mJ

Operating junction and storage temperature range TJ, TSTG -55 to +150 °C

S1A, S1B, S1D, S1G, S1J, S1K, S1M

www.vishay.com Vishay General Semiconductor

Revision: 31-Jul-2018 2Document Number: 88711

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Thermal resistance from junction to ambient and from junction to lead mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas

Note

(1) AEC-Q101 qualified



RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT

Maximum instantaneous

forward voltage 1.0 A VF 1.1 V

Maximum DC reverse current

at rated DC blocking voltage

TA = 25 °C IR 1.0 5.0 μA

TA = 125 °C 50

Typical reverse recovery time IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 1.8 μs

Typical junction capacitance 4.0 V, 1 MHz CJ 12 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT

Typical thermal resistance (1) RJA 75 85 °C/W

RJL 27 30

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

S1J-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel

S1J-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel

S1JHE3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel

S1JHE3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel

S1J-M3/61T 0.064 61T 1800 7" diameter plastic tape and reel

S1J-M3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel

S1JHM3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel

S1JHM3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel

Resistive or Inductive Load

1.2

60 80 16020 40

Lead Temperature (°C)

Average Forward Current (A)

120 140100

1.0

0.8

0.6

0.4

0.2

0.2" x 0.2" (5.0 mm x 5.0 mm)

Thick Copper Pad Areas

S1A thru S1J

S1K, S1M

100

1 10010

= 110 °C

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

S1A thru S1J

S1K, S1M

S1A, S1B, S1D, S1G, S1J, S1K, S1M

www.vishay.com Vishay General Semiconductor

Revision: 31-Jul-2018 3Document Number: 88711

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Leakage Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.01

0.1

100

0.4 0.8 1.2 1.6

Instantaneous Forward Current (A)

Instantaneous Forward Voltage (V)

TJ= -40 °C

TJ= 25 °C

Pulse Width = 300 μs 1% Duty Cycle

0.001

0.01

0.1

020406080100

Instantaneous Reverse Current (μA)

Percent of Rated Peak Reverse Voltage (%)

TJ= 75 °C

TJ= 25 °C

TJ= -40 °C

TJ= 150 °C

Reverse Voltage (V)

Junction Capacitance (pF)

0.1 0.01 1 10 100

100

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

t - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

0.1 0.01 1 10 100

100

1000

Units Mounted on

0.20" x 0.20" (5.0 mm x 5.0 mm)

x 0.5 Mil. Inches (0.013 mm)

Thick Copper Land Areas

S1A thru S1J

S1K, S1M

0.008 (0.203)

0.194 (4.93)

0.208 (5.28)

0.157 (3.99)

0.177 (4.50)

0.100 (2.54)

0.110 (2.79)

0.078 (1.98)

0.090 (2.29)

0.006 (0.152)

0.012 (0.305)

0.049 (1.25)

0.065 (1.65)

Cathode Band

0 (0)

SMA (DO-214AC)

Mounting Pad Layout

0.074 (1.88)

MAX.

0.208 (5.28)

REF.

0.066 (1.68)

MIN.

0.060 (1.52)

MIN.

0.030 (0.76)

0.060 (1.52)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.