UNISONIC TECHNOLOGIES CO., LTD
TIP102 NPN SILICON TRANSISTOR
www.unisonic.com.tw 1 of 4
Copyright © 2010 Unisonic Technologies Co., Ltd QW-R209-025.A
NPN EPITAXIAL TRANSISTOR
DESCRIPTION
The UTC TIP102 is designed for using in general purpose
amplifier and switching applications.
FEATURES
* Low VCE(SAT)
* High Current Gain
* Complementary to TI P107
ORDERING INFORMATION
Ordering Number Pin Assignment
Lead Free Halogen Free Package 1 2 3 Packing
TIP102L-TN3-R TIP102G-TN3-R TO-252
B C E Tape Reel
TIP102 NPN SILICON TRANSISTO R
UNISONIC TECHNOLOGIES CO., LTD 2 of 4
www.unisonic.com.tw QW-R209-025.A
ABSOLUTE MAXIMUM RA TING (TC=25°C)
PARAMETER SYMBOL RATINGS UNIT
Collector-Base Voltage VCBO 100 V
Collector-Emitter Voltage VCEO 100 V
Emitter-Base Voltage VEBO 5 V
DC IC 8 A
Collector Current Pulse ICP 15 A
Base Current DC IB 1
A
Collector Power Dissipation PC 80 W
Junction Temperature TJ 150 °C
Storage Temperature TSTG -65~+150 °C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device op eration is not implied.
ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Collector-Emitter Sustaining Voltage VCEO(SUS) I
C=30mA, IB=0A 100
V
Collector-Base Cut-Off Current ICBO VCB=100V, IE=0A 50
µA
Collector-Emitter Cut-Off Current ICEO VCE=50V, IB=0A 50
µA
Emitter-Base Cut-Off Current IEBO VEB=5V, IC=0A 2
mA
ON CHARACTERISTICS hFE1 VCE=4V, IC=3A 1000 20000
DC Current Gain hFE2 VCE=4V, IC=8A 200
IC=3A, IB=6mA 2
V
Collector-Emitter Saturation Voltage VCE(SAT) IC=8A, IB=80mA 2.5 V
Base-Emitter ON Voltage VBE(ON) V
CE=4V, IC=8A 2.8 V
SMALL-SIGNAL CHARACTERISTICS
Output Capacitance COB VCB=10V, IE=0A, f=0.1MHZ 300 pF
TIP102 NPN SILICON TRANSISTO R
UNISONIC TECHNOLOGIES CO., LTD 3 of 4
www.unisonic.com.tw QW-R209-025.A
TYPICAL CHARACTERISTICS
Collecter Current, IC(mA)
DC
100µs
5ms
TIP102 NPN SILICON TRANSISTO R
UNISONIC TECHNOLOGIES CO., LTD 4 of 4
www.unisonic.com.tw QW-R209-025.A
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
