SMD Power Inductors Features: * * * Ferrite based SMD inductor with lower core loss. Ideal for LCD driver, DSC/DVC, Notebook PC or High density board design. Operating temperature range -55C to + 130C. MCSDRH73B - Series * * * High current output chokes, up to 8 amperes with about 30% roll off. Low profile 3.55 mm maximum height. Foot print : 7.6 x 7.6 mm maximum. MCSDRH125B - Series Applications: * * * Integrated DC/DC converter. Notebook computers. Excellent for power line DC-DC conversion application used in hard disk, notebook computers and other electronic equipment. * * * High current output chokes, up to 24.2 amperes with about 30% roll off. Low profile 6 mm maximum height. Foot print : 12.5 x 12.5 mm maximum. Figure 1 Top View Side View Suggest PCB Layout Bottom View Figure 2 Top View Side View Bottom View Suggest PCB Layout Dimensions : Millimetres http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <1> 20/06/11 V1.1 SMD Power Inductors Mechanical Dimensions MCSDRH73B (Figure 1) (mm) Type MCSDRH125B (Figure 2) (mm) A 7.3 0.3 - 12 0.5 - B 7.3 0.3 - 12 0.5 - C 3.55 (Maximum) 6 (Maximum) D 7 0.3 - 7 (Reference) E 3.9 (Reference) 5 (Reference) F 2 (Reference) 2.5 (Reference) Electrical Characteristics OCL (H) 20% DCR ) ( (Typical) DCR ) ( (Maximum) Isat (A) at 25C L at Isat (H) (Typical) Irms (A) at 25C L at Irms (H) (Typical) Part Number 1 0.0091 0.0109 8 0.785 6.5 0.89 MCSDRH73B-1R0MHF 1.5 0.0125 0.015 6.52 1.186 5.54 1.325 MCSDRH73B-1R5MHF 2.2 0.018 0.0216 5.52 1.7 4.6 1.95 MCSDRH73B-2R2MHF 3.3 0.023 0.0276 4.4 2.69 4.08 2.84 MCSDRH73B-3R3MHF 4.7 0.0297 0.0356 3.78 3.63 3.65 3.8 MCSDRH73B-4R7MHF 6.8 0.0415 0.0498 3.12 5.53 3.04 5.66 MCSDRH73B-6R8MHF 8.2 0.0525 0.063 2.8 6.5 2.7 6.7 MCSDRH73B-8R2MHF 10 0.0656 0.0787 2.5 8.16 2.35 8.48 MCSDRH73B-100MHF 15 0.08 0.096 2.05 10.3 2.12 9.65 MCSDRH73B-150MHF 22 0.108 0.13 1.67 15.25 1.83 13.9 MCSDRH73B-220MHF 33 0.166 0.199 1.35 24.75 1.48 19.75 MCSDRH73B-330MHF 47 0.231 0.277 1.14 33.2 1.25 27.9 MCSDRH73B-470MHF 68 0.331 0.397 0.96 48 1.04 41.33 MCSDRH73B-680MHF 82 0.41 0.492 0.89 55.05 0.94 49.3 MCSDRH73B-820MHF 100 0.491 0.589 0.79 71 0.86 60.33 MCSDRH73B-101MHF 150 0.751 0.901 0.65 100.8 0.69 88.9 MCSDRH73B-151MHF 220 1.05 1.26 0.53 156.3 0.59 126 MCSDRH73B-221MHF 330 1.59 1.908 0.44 252.7 0.48 219.9 MCSDRH73B-331MHF 470 2.17 2.604 0.37 320.2 0.41 263.7 MCSDRH73B-471MHF 680 3.12 3.744 0.31 542.1 0.34 467.3 MCSDRH73B-681MHF 820 4.01 4.812 0.28 591.3 0.3 515.5 MCSDRH73B-821MHF 1000 5.06 6.072 0.25 679.9 0.27 578.4 MCSDRH73B-102MHF http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <2> 20/06/11 V1.1 SMD Power Inductors Electrical Characteristics OCL (H) 20% DCR ) ( (Typical) DCR ) ( (Maximum) Isat (A) at 25C L at Isat (H) (Typical) Irms (A) at 25C L at Irms (H) (Typical) Part Number 0.82 0.0039 0.0047 24.2 0.659 15.5 0.807 MCSDRH125B-R82MHF 1.5 0.0052 0.00625 18.5 1.12 13.3 1.4 MCSDRH125B-1R5MHF 2.2 0.0064 0.0077 14.8 1.75 12 2.05 MCSDRH125B-2R2MHF 3.3 0.0079 0.0095 12.6 2.65 10.8 2.95 MCSDRH125B-3R3MHF 4.7 0.0107 0.01285 10.1 3.6 9.3 4 MCSDRH125B-4R7MHF 6.8 0.0119 0.0143 8.4 5.75 8.8 5.5 MCSDRH125B-6R8MHF 8.2 0.0156 0.0187 7.6 6.6 7.7 6.5 MCSDRH125B-8R2MHF 10 0.0164 0.0197 6.9 8.3 7.5 7.45 MCSDRH125B-100MHF 15 0.0268 0.0322 5.65 11.2 5.8 10.77 MCSDRH125B-150MHF 22 0.0318 0.0382 4.7 18.7 5.4 15.3 MCSDRH125B-220MHF 33 0.0445 0.0534 4 26.65 4.5 21.7 MCSDRH125B-330MHF 47 0.0659 0.079 3.2 37.95 3.7 29.4 MCSDRH125B-470MHF 68 0.0991 0.119 2.7 55.6 3.05 45.3 MCSDRH125B-680MHF 82 0.121 0.145 2.4 67 2.75 52 MCSDRH125B-820MHF 100 0.155 0.186 2.2 79 2.4 66.7 MCSDRH125B-101MHF 150 0.217 0.26 1.8 124.8 2.05 98 MCSDRH125B-151MHF 220 0.321 0.385 1.5 182.4 1.7 148 MCSDRH125B-221MHF 330 0.434 0.52 1.2 284 1.45 206.5 MCSDRH125B-331MHF 470 0.627 0.753 1 402 1.2 293 MCSDRH125B-471MHF 680 0.888 1.066 0.85 548 1 404 MCSDRH125B-681MHF 820 1.093 1.312 0.76 680 0.92 511 MCSDRH125B-821MHF 1000 1.409 1.69 0.69 801 0.8 610 MCSDRH125B-102MHF Note : 1. OCL (Open Circuit Inductance) and L at Irms and L at Isat and DCR are measured at: 100 KHz, 0.25 V at 25C. 2. Isat : DC current that causes inductance to drop by approximately 30% from OCL; (Ta = 25C). 3. Irms : DC current that causes an approximate temperature rise (T) of 40C; (Ta = 25C). 4. Inductance Vs. DC bias curve, please see the next page to get more detail information. 5. Inductance tolerance: 20%, Base type: Plastic. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <3> 20/06/11 V1.1 SMD Power Inductors Inductance vs. Current http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <4> 20/06/11 V1.1 SMD Power Inductors Inductance vs. Current Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2010. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <5> 20/06/11 V1.1