CL31X106KACL3NC - Samsung [Electro-Mechanics]

SPECIFICATION

 Supplier : Samsung electro-mechanics  Samsung P/N : CL31X106KACL3NC

 Product : Multi-layer Ceramic Capacitor Description : CAP, 10㎌, 25V, ±10%, X6S, 1206

CL 31 X 106 K A C L 3 N C

① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪

①Series Samsung Multi-layer Ceramic Capacitor

②Size 1206 (inch code) L: 3.2 ± 0.2 mm W: ± 0.2 mm

⑧Thickness division Low profile

③Dielectric X6S Inner electrode

④Capacitance 10 ㎌Termination

⑤Capacitance ±10 % Plating (Pb Free)

tolerance ⑨Product DC-Bias Improved product

⑥Rated Voltage 25 V ⑩Special Reserved for future use

⑦Thickness 0.85 ± 0.1 mm ⑪Packaging Cardboard Type, 7" reel

B. Samsung Reliablility Test and Judgement condition

Capacitance Within specified tolerance 1㎑±10% 1.0±0.2Vrms

Tan δ (DF) 0.1 max.

Insulation 10,000Mohm or 100Mohm㎌Rated Voltage 60~120 sec.

Resistance Whichever is Smaller

Appearance No abnormal exterior appearance Microscope (10)

Withstanding No dielectric breakdown or of the rated voltage

Voltage mechanical breakdown

Temperature X6S

Characterisitcs (From -55℃ to 105℃, Capacitance change shoud be within ±22%)

Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.

of Termination terminal electrode

Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm)

with 1.0mm/sec.

Solderability More than 75% of terminal surface 1) Sn63Pb37 solder

is to be soldered newly 235±5℃, 5±0.5sec.

2) SnAg3.0Cu0.5 solder

245±5℃, 3±0.3sec.

(preheating : 80~120℃ for 10~30sec.)

Resistance to Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.

Soldering heat Tan δ, IR : initial spec.

Performance Test condition

250%

A. Samsung Part Number

Sn 100%

1.6

Vibration Test Capacitance change : within ±10% Amplitude : 1.5mm

Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)

2hours  3 direction (x, y, z)

Moisture Capacitance change : within ±12.5% With rated voltage

Resistance Tan δ : 0.125 max 40±2℃, 90~95%RH, 500+12/-0hrs

IR : 12.5㏁·㎌ or Over

High Temperature Capacitance change : within ±12.5% Wit

of the rated voltage

Resistance Tan δ : 0.125 max Max. operating temperature

IR : 25㏁·㎌ or Over

1000+48/-0hrs

Temperature Capacitance change : within ±15% 1 cycle condition

Cycling Tan δ, IR : initial spec. Min. operating temperatur

→25℃

→Max. operating temperature →25℃

5 cycle test

C. Recommended Soldering method :

Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )

* For the more detail Specification, Please refer to the Samsung MLCC catalogue.

Performance Test condition

150%