SMM0204 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES * * * * Stable metal film on high quality ceramic Low TC and tight tolerances Excellent stability in different environmental conditions Pure tin termination on nickel barrier, plated on press fit steel caps * Compatible with lead (Pb)-free and lead containing soldering processes * Lead (Pb)-free and RoHS compliant STANDARD ELECTRICAL SPECIFICATIONS LIMITING ELEMENT POWER RATING1) P70 VOLTAGE2) DC or AC rms V W MODEL TEMPERATURE COEFFICIENT ppm/K TOLERANCE % RESISTANCE RANGE E-SERIES SMM0204 0.25 200 15 0.1 0.25 0.5 43R - 221K 22R - 221K 10R - 221K 24 - 192 24 - 192 24 - 192 SMM0204 0.25 200 25 0.1 0.25 0.5 43R - 511K 22R - 511K 10R - 1M0 24 - 192 24 - 192 24 - 192 SMM0204 0.25 200 50 0.5 1 10R - 1M0 R82 - 10M 24 - 192 24 - 96 SMM0204 0.25 200 100 5 R22 - 10M 24 Zero-Ohm-Resistor: OMM0204 Rmax = 10 m Imax = 2 A Note 1. Permissible dissipation depends on the maximum temperature at the solder point, the component placement density and the substrate material. 2. Rated voltage: * * PxR . * * Further values and tolerances on request Coating: Light green for TC = 100 ppm/K, 50 ppm/K and zero ohm resistor Pink TC = 25 ppm/K Violet TC = 15 ppm/K Marking: According to IEC 60062; see also data sheet "surface mount resistor marking" (document number: 20020) Zero ohm resistor has a black band only TECHNICAL SPECIFICATIONS PARAMETER UNIT SMM0204 Rated Dissipation at 70 C W 0.25 Limiting Element Voltage, DC or AC rms V 200 Insulation Voltage (1 min), DC or AC peak V 300 K/W 220 Insulation Resistance 1010 Category Temperature Range C - 55 to + 125 (+ 155) 10-9/h <1 g 18 Thermal Resistance3) Failure Rate Weight/1000 pcs Note 3. Based on measurements on test board acc. to EN 140400. www.vishay.com 24 For Technical questions contact: ff3bresistors@vishay.com Document Number: 20004 Revision: 15-Mar-06 SMM0204 Vishay Draloric Metal Film Cylindrical Resistors DIMENSIONS DIMENSIONS [in millimeters] MODEL L SMM0204 Dmax d* L Amax Amin 1.4 D -0.15 3.6 - 0.15 0.85 0.5 * d measured in the middle of the resistor Dmax SOLDER PAD DIMENSIONS [in millimeters] A MODEL REFLOW SOLDERING WAVE SOLDERING b I SMM0204 a a b l a b l 1.0 1.6 2.2 1.2 1.6 2.2 PART NUMBER AND PRODUCT DESCRIPTION1) PART NUMBER2): SMM0204VC5620FB0 PART NUMBER2): OMM02040000000B0 S M M 0 2 0 4 V C 5 6 2 0 F B 0 0 0 O M M 0 2 0 4 0 0 0 0 0 0 0 B 0 0 0 MODEL/SIZE SPECIAL CHARACTER TC VALUE TOLERANCE PACKING3) SPECIAL SMM0204 OMM0204 0 = neutral V = CECC E0 E = 15 ppm/K D = 25 ppm/K C = 50 ppm/K B = 100 ppm/K 0 = Jumper 3 digit value 1 digit multiplier 0000 = jumper MULTIPLIER 7 = *10-3 2 = *102 8 = *10-2 3 = *103 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 6 = *106 B = 0.1 % C = 0.25 % D = 0.5 % F=1% J=5% 0 = Jumper B1 B3 B0 M3 up to 2 digits 00 = standard PRODUCT DESCRIPTION: SMM0204 50 562R 1% B0 CECC 40401-803E0 PRODUCT DESCRIPTION: OMM0204 0R0 B0 SMM0204 50 562R 1% B0 CECC 40401-803E0 OMM0204 - 0R0 - B0 - MODEL TC RESISTANCE VALUE TOLERANCE PACKING3) SPECIAL SMM0204 OMM0204 15 ppm/K 25 ppm/K 50 ppm/K 100 ppm/K 100R = 100 2M21 = 2.21 M 0R0 = Jumper 0.1 % 0.25 % 0.5 % 1% 5% B1 B3 B0 M3 CECC 40401-803E0 Note 1. Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. 2. The PART NUMBER is shown to facilitate the introduction of a unified part numbering system. Currently, this PART NUMBER is applicable in the Americas only. 3. Please refer to table PACKING, see below. Document Number: 20004 Revision: 15-Mar-06 For Technical questions contact: ff3bresistors@vishay.com www.vishay.com 25 SMM0204 Metal Film Cylindrical Resistors 60 Rated Power in % Temperature rise in C Vishay Draloric on epoxy glass (PCB) 50 40 30 120 100 80 60 on ceramic 20 40 10 20 0 0 0.1 0.2 0.3 120 110 100 90 80 - 55 - 25 0 25 50 Derating 75 100 125 155 Ambient Temperature in C 70 3 2 Current Noise in V/V Non-linearity A3 in dB Temperature rise 1 0.5 0.3 0.1 0.05 0.03 70 60 10 100 1K 10K 0.01 1K 100K 1M 10M Resistance Value in Non-linearity 60 SMM0204-MS1 40 10 20 470 1K 100 - 20 80 4.7K - 60 10K 5 10 50 HF - Performance 0.4 39 100 470 1K - 40 4.7K - 60 10K - 80 100 500 1000 40 Frequency F in MHz 1 5 10 HF - Performance 50 100 500 1000 Frequency F in MHz 20 u = F [P] Parameter: size 0.5 60 10 20 - 20 - 40 5M 10M Resistance Value in SMM0204-MS1 0 1 500K 1M 40 0 - 80 50K 100K 60 39 100 120 SMM0204-MS1 5K 10K Current Noise |Z| - R0 in % Phase angle in 0 0.4 Power in W 0.3 0.2 0.1 0 0 Load P in W www.vishay.com 26 For Technical questions contact: ff3bresistors@vishay.com Document Number: 20004 Revision: 15-Mar-06 SMM0204 Vishay Draloric 120 100 80 SMM0204-MS1 60 u = F [P] Parameter: size 0.4 0.5 0.3 0.2 0.1 0 Temperature rise u in K Metal Film Cylindrical Resistors 20 0 20 0.1 40 60 80 0R, 10 10R C 50 C 60 C 1K 100 K 10K 1M 0.1 R/R [t = 1000 h] = f [s ] Parameter: Resistance value 1 20 Test Voltage in V Test Voltage in V 100 40 , 10 40 60 80 100 Stability Nomogram typical values 1K C 30 10R 1 0.01 3K C C 70 C 80 C 90 C 0 10 C 0 11 C 0 2 1 C 0 13 C 0 14 C 0 15 100 120 140 160 Film temperature s in C 20 0.01 Resistance change [R/R] in % after 1000 h 0.01 = u 60 20 0 u = F [ s ] Parameter: u 80 40 R/R (t) = f [R/R (t = 1000h)] Parameter: time 0.1 100 40 Load P in W h h h h 00 0 00 000 000 000 0 2 5 8 2 h h h h 00 0 00 000 000 000 0 1 2 4 1 10 1 Resistance change [R/R] in % 120 120 140 160 Film temperature s in C 3K 1K 100 100R 1K 10K 100K Resistance Value in Single pulse high voltage overload test 1.2/50 acc. EN 60115-1, 4.27 Document Number: 20004 Revision: 15-Mar-06 10 10R 100R 1K 10K 100K Resistance Value in Single pulse high voltage overload test 10/700 acc. EN 60115-1, 4.27 For Technical questions contact: ff3bresistors@vishay.com www.vishay.com 27 SMM0204 Metal Film Cylindrical Resistors 1000 Power rating P in W 1000 SMM0204-MS1 100 10 1 10-4 10-3 Pulse Rating P P70 Pulse Voltage Umax in V 1000 10-2 10-1 100 10 1 Secondary conditions: a) P P70 (permissible constant power at u 70 C) b) u 70 C c) Umax see diagram (Max. pulse voltage) 0.1 10-5 SMM0204-MS1 Secondary conditions: a) P 0 (peak pulse, single pulse) b) u 70 C c) Umax see diagram (Max. pulse voltage) 0.1 10-5 1 10 Square pulse ti in s 10-4 10-3 Pulse Rating P 10-2 10-1 0 1 10 Square pulse ti in s SMM0204-MS1 800 600 400 200 Secondary conditions: a) P see diagram (Pulse Rating) b) u 70 C 0 10-5 10-4 10-3 10-2 10-1 Maximum Pulse Voltage 1 10 Square pulse ti in s 120 u = [C] Power rating P in W Vishay Draloric 100 = u 0.4 W 80 = u 60 0.25 W = u 40 0.125 W = u 0.0625 W 3 5 7 100 2 3 5 7 40 60 80 C C C C 0 20 = u 2 1 2 3 5 7 10 number of mounted resistors [pcs] Testboard FR4 (50 x 50 x 1.6) mm 20 60 80 100 10 0 C = u 12 C 120 140 surface temperature s [C] Power rating as a function of packaging density (guideline) www.vishay.com 28 For Technical questions contact: ff3bresistors@vishay.com Document Number: 20004 Revision: 15-Mar-06 SMM0204 Vishay Draloric Metal Film Cylindrical Resistors PACKING BLISTER TAPE ON REEL ACC. IEC 60286-6 BULK CASE ACC. IEC 60286-6 MODEL SMM0204 OMM0204 DIAMETER PIECES / REEL CODE 180 mm/7" 1000 B1* 180 mm/7" 3000 B3 330 mm/13" 10000 B0 PIECES/BULK CASE CODE 3000 M3 * For TC 25 ppm/K and Tolerance 0.25 % only PERFORMANCE REQUIREMENTS1) TEST CONDITIONS OF TEST Endurance Test at 70 C IEC 60115-1, 4.25.1 1000 hours at 70 C 1.5 hours "ON" 0.5 hours "OFF" 0.25 % Endurance at UCT IEC 60115-1, 4.25.3 1000 hours at 125 C without load 0.25 % Overload Test IEC 60115-1, 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05 % Thermal Shock IEC 60115-1, 4.19 and IEC 60068-2-14 Rapid change between upper and lower category temperature, 5 cycles 0.05 % Damp Heat Steady State IEC 60115-1, 4.24 and IEC 60068-2-78 56 days at 40 C and 93 % relative humidity 0.25 % Resistance to Soldering Heat IEC 60115-1, 4.18 and IEC 60068-2-58 10 seconds at 260 C solder bath temperature 0.05 % Note 1. For a resistance range from 10 to 332 k, limits for change of resistance at test acc. to EN 140401-803. APPLICABLE SPECIFICATIONS * EN140401-803 * EN140400 * EN 60115-1 Document Number: 20004 Revision: 15-Mar-06 For Technical questions contact: ff3bresistors@vishay.com www.vishay.com 29 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1