The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. I/O Card Interface Connectors NX Series 3. ESD Secure Thermoplastic molded covers assures insulation of the connections and shields from ESD. 4. Secure Latching A built-in latch assures correct and secure mating of connector. 5. Reliable Conductor Termination Reliable termination of conductors accomplished by proven IDC termination. is 6. Sequential Mating The 0.8mm pitch contacts are engaging the corresponding parts in sequence: GroundPower & Signal 7. Rugged Construction Securely attached to the board with optional screws. Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 8. Card Frame Kits Available as a separate part number. 2. EMI/RFI protection Full metal shielding. Shield connects first, ahead of contacts. Applications Used with I/O cards, portable personal computers,and the external connections of various small-sized portable terminals. Specifications Current rating 0.5 A Ratings Voltage rating 125 V AC Operating temperature -30c to +70c (Note 1) Storage temperature range -10c to +60c (Note 2) Operating humidity 95% R.H. or less Item (No condensation) Storage humidity range Specification 40 to 70% (Note 2) Conditions 1. Insulation resistance 250 Mo min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 300 V AC / 1 minute 3. Contact resistance 40 mo max. 100 mA 4. Vibration No electrical discontinuity of 10s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 100 Mo min. 96 hours at temperature of 60c and humidity of 90% to 95% 6. Temperature cycle No damage, cracks, or parts looseness. -55c, 30 min./15 to 30c, within 5 min/85c, 30 min /15 to 35c, within 5 min, for 5 cycles 7. Durability (Insertion/withdrawal) 60 mo max. 3000 cycles 8. Resistance to Soldering heat No deformation of components affecting Reflow: At the recommended temperature profile performance. Manual soldering: 300c for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. B8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Materials BApplicable Cable Item Material Insulator Receptacle Contacts Plug unit Plug cover Finish Thermoplastic Compound Black UL94V-0 Copper alloy Selective gold plating ---- Body Stain less Solder Plating ---- Insulator Thermoplastic Compound Black ---- Contacts Copper alloy Selective gold plating UL94V-0 Cover Thermoplastic Compound Black Body Stainless Steel Frame Thermoplastic Compound I/O cable Conductor size AWG # 28(7/0.127) Jacket outer diameter 0.58mm 0.62mm Cable style UL20276 and UL2789 UL2990 ---- Frame ground Phosphor bronze terminal Frame kit Remarks UL94V-0 Black ---- Gold Plating ---- Spring pin Stainless steel - ---- Coil spring Stainless steel - ---- Panel Stainless steel With thermal adhesive tape ---- Ordering Information Receptacle NX 60 T A - 15 S AA 9 - SP 1 2 3 5 11 6 7 8 9 Plug NX 30 T A - 15 P AA 1 2 3 4 5 6 7 Plug Covers NX - 15 T A - CV 1 5 3 11 10 Frame Kits SP : Compliant mounting bracket (for cards use) NX - 15 T - KT 9 (05) 1 5 3 10 8 12 Panel (For 9, 15, or 25 contacts) NX T - P (05) 1 3 10 12 (For 32 contacts) NX - 32 T - P (05) 1 5 3 10 12 B9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BDimensions of Connector Cross Section 0.9 mm offset type 0.3 mm offset type BRecommended Board Dimensions (Board Thickness: 0.5 mm Maximum) Unit: mm B10 Part Number CL No. Number of contacts A B C D offset NX-09T-KT9 234-0010-8 09 26.4 25.0 22.4 06.4 0.9 NX-15T-KT9 234-0011-0 15 31.2 29.8 27.2 11.2 0.9 NX-25T-KT9 234-0012-3 25 39.2 37.8 35.2 19.2 0.9 NX-32T-KT9 234-0026-8 32 44.8 43.4 40.8 24.8 0.9 NX-09T-KT3 234-0034-6 09 26.4 25.0 22.4 06.4 0.3 NX-15T-KT3 234-0035-9 15 31.2 29.8 27.2 11.2 0.3 NX-25T-KT3 234-0036-1 25 39.2 37.8 35.2 19.2 0.3 NX-32T-KT3 234-0054-3 32 44.8 43.4 40.8 24.8 0.3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacle 0.9 mm offset type D P=0.8 Contact No.1 2 * 2 8 1.9 0.3 A NX60TA- SAA9-SP B O1 2.9 0.9 C Unit: mm Part Number CL No. Number of contacts A B C D NX60TA-09SAA9-SP 234-0106-5 09 25.2 19.7 17.2 06.4 NX60TB-15SAA9-SP 234-0097-6 15 30.0 24.5 22.0 11.2 NX60TA-25SAA9-SP 234-0107-8 25 38.0 32.5 30.0 19.2 NX60T0-32SAA9-SP 234-0023-0 32 43.6 38.1 35.6 24.8 0.3 mm offset type Contact No.1 NX60TA- SAA3-SP Unit: mm Part Number CL No. Number of contacts A B C D NX60TA-09SAA3-SP 234-0031-8 09 25.2 19.7 17.2 06.4 NX60TB-15SAA3-SP 234-0098-9 15 30.0 24.5 22.0 11.2 NX60TA-25SAA3-SP 234-0033-3 25 38.0 32.5 30.0 19.2 NX60TA-32SAA3-SP 234-0053-0 32 43.6 38.1 35.6 24.8 B11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug units NX30TA-15PAA CL234-0005-8 Contact No.1 Unit: mm Part Number CL No. Number of contacts A B NX30TA-09PAA 234-0002-0 09 14.6 14.1 NX30TA-15PAA 234-0005-8 15 19.4 18.9 NX30TA-25PAA 234-0008-6 25 27.4 26.9 NX30TA-32PAA 234-0024-2 32 33.0 32.5 Plug Covers NX-15T-CV CL234-0006-0 Unit: mm Part Number CL No. Number of contacts A B C D E F G Outer diameter of cable NX-09T-CV 234-0003-2 09 18.2 21.2 14.0 26 06.0 5.5 6.5 less than O 5.5 NX-15T-CV 234-0006-0 15 23.0 26.0 18.8 28 07.0 6.0 7.0 less than O 6.0 NX-15T-CV1 234-0017-7 15 23.0 26.0 18.8 28 05.0 4.0 5.0 less than O 4.0 NX-25T-CV 234-0009-9 25 31.0 34.0 26.8 30 08.0 6.5 7.5 less than O 6.5 NX-25TA-CV1 234-0039-0 25 31.0 34.0 26.8 32 13.0 4.0 5.0 less than O 6.5(Note) NX-32TA-CV1 234-0025-5 32 36.6 40.6 32.4 32 16.2 4.2 5.0 less than O 7.5(Note) Note: Designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing. B12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Frame Frame kit (Frame + 2 X Cover Panels) Cover NX-15T-KT9 CL234-0011-0 Unit: mm Connectors for the card Side(Note 1) Part Number CL No. Number of contacts NX-09T-KT9 234-0010-8 09 NX-15T-KT9 234-0011-0 15 NX-25T-KT9 234-0012-3 25 NX-32T-KT9 234-0026-8 32 NX60TA-32SAA9-SP NX-09T-KT3 234-0034-6 09 NX60TA-09SAA3-SP NX-15T-KT3 234-0035-9 15 NX-25T-KT3 234-0036-1 25 NX-32T-KT3 234-0054-3 32 CL No. Part Number Offset Back Connector NX60TA-09SAA9-SP IC1F-68RD-1.27SFA IC1F-68RD-1.27SFA 640-0040-3 640-0035-3 0.9mm 0.3mm NX60TB-15SAA9-SP NX60TA-25SAA9-SP NX60TB-15SAA3-SP NX60TA-25SAA3-SP NX60TA-32SAA3-SP Frame only NX-15T-F9 CL234-0019-2 Unit: mm Part Number CL No. Number of contacts Connectors for the card Side Back Connector Panel NX-09T-F9 234-0018-0 09 NX-15T-F9 234-0019-2 15 NX-25T-F9 234-0020-1 25 NX-32T-F9 234-0063-4 32 NX60TA-32SAA9-SP NX-32T-P NX-09T-F3 234-0060-6 09 NX60TA-09SAA3-SP NX-15T-F3 234-0061-9 15 NX-25T-F3 234-0062-1 25 NX-32T-F3 234-0067-5 32 Coil Spring Offset NX-CSA 0.9mm NX60TA-09SAA9-SP IC1F-68RD-1.27SFA IC1F-68RD-1.27SFA NX60TB-15SAA9-SP NXT-P NX60TA-25SAA9-SP NX60TB-15SAA3-SP NXT-P NX60TA-25SAA3-SP NX60TA-32SAA3-SP NX-32T-P NX-CSA & 0.3mm NX-CSB B13 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2PCMCIA cards) Panel (for type2 NXT-P CL234-0058-4 Unit: mm Part Number CL No. NXT-P 234-0058-4 NXT-P(05) 234-0058-4-05 NX-32T-P 234-0059-7 NX-32T-P(05) 234-0059-7-05 Number of Frame contacts 9, 15, 25 32 Panel Finish Silver matt finish Dull processing material Silver matt finish Dull processing material 1PCMCIA cards) Panel (for type1 NXT-PA CL234-2011-1 Part Number CL No. NXT-PA 234-2011-1 NXT-PA(05) 234-2011-1-05 NX-32T-PA 234-0068-8 Number of Frame contacts 9, 15, 25 32 Panel Finish Silver matt finish Dull processing material Silver matt finish Dull processing material NX-32T-PA(05) 234-0068-8-05 Panels are avilable in two types: a 32-contact special type and a common type with 9, 15, or 25 contacts. Ordering volume for panels is one panel per unit volume.One frame corresponds to 2 panels. B14 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ground contact spring Bushing NX-CSA CL234-0042-4 Part Number CL No. NX-32T-BS CL234-0055-6 Offset: Ordering Volume Part Number CL No. Number of contacts NX-25T-BS 234-0074-0 25 NX-32T-BS 234-0055-6 32 NX-CSA 234-0042-4 0.3mm: One Pack 0.9mm: Two Packs NX-CSB 234-0043-7 0.3mm: One Packs Sold in package of 1000 pcs. For 1,000 frames of 0.9 offset, please order two packs of NX-CSA. For 1,000 frames of 0.3 offset, please order one pack of NX-CSA and one pack of NX-CSB. Applications for Connections of I/O Card Connectors Modular plugs for round cable (AWG #28) connector No. of contacts 6 Contacts Modular Plug Manual Wiring Tool Part Number CL No. Part Number CL No. 6 TM30P-66P 222-2684-2 TC1-TM30P-66P 250-0145-6 8 TM30P-88P 222-2685-5 TC1-TM30P-88P 250-0146-9 8 Contacts 8-Contact adapter Lead Number Reference Table TM5RL-88-JJ CL222-3798-7 Connector (a) Contact number TM5RL-88 1 2 3 4 5 6 7 8 Connector (b) Contact number TM5RL-88 1 2 3 4 5 6 7 8 B15 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPlug Termination Tool Fixtures Cable wiring cradle NX/3230-CAT CL902-0250-4 Cutting and IDC termination Fixture main unit NX/3230-HP CL902-0252-0 Cutting and IDC termination attachment fixtures NX30TA-9GP CL902-0253-2 NX30TA-15GP CL902-0254-5 NX30TA-25GP CL902-0255-8 NX30TA-32GP CL902-0257-3 Wiring Procedure B16 1. Set the wires in the wiring fixtures. 2. Align holding plates (A) and (B). 3. Arrange the wires one at a time through holding plates (A) and (B). 4. Set holding plates (A) and (B) onto the guide plate. 5. Insert the guide plate into the pressure welding and cutting fixtures. 6. Pull down the handle. The wiring and cutting of excess cable length are completed. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. B Frame Kit Fixture Ground spring press fitting fixture Special blocks A frame kit thermal fixture and a cooling fixture are also available. B Wiring Fixture and Accessories List Plug Process Cable I/O Cable Discrete cable Connector Wiring Pressurs Welding and Cutting Press Guide Plate Shield Case Caulking Cover Case Hand Tool Hood Fitting NX-30TA-9HC NX30TA-09PAA NX30TA-09GP NX-09T-CV0 NX30TA-32PAA NX30TA-32GP NX-32T-CV1 Screw Fixing CL902-0260-8 NX-30TA-15HC NX-15T-CV0 NX/3230-CAT CL902-0261-0 NX30TA-15GP NX30TA-15PAA NX-30TA-15HC1 Manual Work (All contacts NX/3230-HP NX-15T-CV1 CL902-0262-3 common) NX-30TA-25HC1 NX30TA-25GP NX-25T-CV NX30TA-25PAA CL902-0263-6 Note 1: The caulking height of hand tool is defined by follwing cable specifications. Note 2: Caulking specification change is needed when special cable is used. Cable Diameter Strand Termination NX-9T-CV Cover Case O 5.10.2 Fold the shield and bind 1.5 times with copper tape. NX-15T-CV O 5.70.2 Do, NX-25T-CV O 6.50.2 Do, NX-15T-CV1 O 3.80.2 Crimp with cable sheath directly. Frame Kit Process Frame Kit Spring Pin Press Fitting Panel Thermal Press Caulking NX-25T-KT(9*3) NX-32T-KT(9*3) Panel Cooling NX-SPT-9 NX-9T-KT(9*3) NX-15T-KT(9*3) Unit CL902-0275-5 NX-SPT-15 NX-SPT CL902-0276-8 NX-PHT NX-PCT CL902-0274-2 NX-SPT-25 CL902-0282-0 CL902-0283-3 CL902-0277-0 NX-SPT-32 CL902-0278-3 B17 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Back Connectors for Type II I/O Cards NX Series 68 Features 1. Low profile Receptacle connectors have a mounting height of 3.5 mm and can be mounted to type II I/O cards. 2. Shielded construction A metal shell is used for shielding. 3. ESD protection The use of an over-mold cover offers excellent ESD protection. 4. More efficient wiring work Wiring on the plug side uses AWG #30 pressure welding (discrete type) for more efficient wiring work. Applications Specifications Item I/O card interfaces. Specification Conditions 1. Current rating 0.5A ---------- 2. Voltage rating 125 V AC ---------- BApplicable I/O Cable 3. Insulation resistance 250 Mo min. 100 V DC 4. Withstanding voltage 300 V AC No flashover or insulation breakdown. 5. Contact resistance 100 mA 40 Mo min. 6. Durability (Insertion/withdrawal) 3000 cycles Conductor size AWG #30 (7/0.1) Insulator outer diameter 0.5mm Cable style UL20276 Finish Remarks Contact resistance : 60 mo max. Materials Item Material Receptacle Plug unit Plug cover Frame kit Insulator Synthetic resin Color : Black UL94V-0 Contacts Copper alloy Selective gold plating ---------- Body Stainless steel Solder plating ---------- Insulator Synthetic resin Color : Black UL94V-0 Contacts Copper alloy Selective gold plating ---------- Cover Synthetic resin Color : Black UL94V-0 Body Stainless steel ---------- ---------- Frame Synthetic resin Color : Black UL94V-0 FG terminal Phosphor bronze Gold plating ---------- Spring pin Stainless steel ---------- ---------- Coil spring Stainless steel ---------- ---------- Panel Stainless steel With thermal adhesive tape ---------- Ordering Information Receptacle NX 60 H - 68 S 9 - SP 1 2 3 4 5 6 7 Plug unit NX 30 H - 68 P 1 2 3 4 3 Wiring style 30: Loose lead pressure welding type (for fine wire) 3 Serial type for form 4 Number of contacts: 68 5 Type of opening S: Receptacle 60: SMT type P: Plug NX - 68 H - CV 4 Series name:NX 2 5 Plug cover 1 1 8 6 Coplanarity: 0.9 (Dimension from connector center to board mounting position) 7 Variations SP: Spring pin (for cards) 8 Type of accessories CV: Vertical opening cover Frame kit NX - 68 H - KT 9 (05) 1 B18 4 3 8 6 9 KT: Frame kit 9 Panel finish (05): Dull processing The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacle Note 1: The signal pin SMT dimension of this product is 0+0.1 -0.05. Note 2: Caulking specification change is needed when special cable is used. Part Number CL No. NX60H-68S9-SP 234-0078-1 Plug Unit Part Number CL No. NX30H-68P 234-0079-4 B19 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Cover Part Number CL No. NX-68H-CV 234-0080-3 Frame Kit Main unit Panel Note 1: Suitable connectors for portion A are IC1F-68RD-1.27SFA. Suitable connectors for portion B are NX60H-68S9-SP. B20 Part Number CL No. NX-68H-KT9(05) 234-0081-6-05 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRCB mounting pattern (Applicable Board Thickness: 0.5 mm MAX) Note 1: Applicable connectors for portion A are IC1F-68RD-1.27SFA. Applicable connectors for portion B are NX60H-68S9-SP. BConnector Mounting Dimensions (Back conector side) B21 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BTemperature Profile Applicable Conditions Reflow system : IR reflow Solder : Paste type 63 Sn/37 Pb (Flux content 9 wt%) Test board Glass epoxy 47mm x 77.3mm x 0.5 mm Metal mask thickness: 0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount. B22