NX30T-15PAA(01) - Hirose Electric

B8

I/O Card Interface Connectors

NX Series

1. Low Pr ofile

Protorusion above the PCB board is only 2.9mm, and the

connectors can be mounted to type I and II I/O cards.

2. EMI/RFI protection

Full metal shielding. Shield connects first, ahead of

contacts.

3. ESD Secure

Thermoplastic molded covers assures insulation

of the connections and shields from ESD.

4. Secure Latching

A built-in latch assures correct and secure

mating of connector.

5. Reliable Conductor Termination

Reliable termination of conductors is

accomplished by proven IDC termination.

6. Sequential Mating

The 0.8mm pitch contacts are engaging the

corresponding parts in sequence: Ground-

Power & Signal

7. Rugged Construction

Securely attached to the board with optional

screws.

8. Card Frame Kits

Available as a separate part number.

■Features

■Specifications

100 V DC

300 V AC / 1 minute

100 mA

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

2 hours in each of the 3 directions.

96 hours at temperature of 60ç and humidity of 90% to 95%

-55ç, 30 min./15 to 30ç, within 5 min/85ç, 30 min

/15 to 35ç, within 5 min, for 5 cycles

3000 cycles

Reflow: At the recommended temperature profile

Manual soldering: 300ç for 3 seconds

250

Mø

min.

No flashover or insulation breakdown.

40 mømax.

No electrical discontinuity of 10µs or

more

Insulation resistance: 100 Mømin.

No damage, cracks, or parts looseness.

60 mømax.

No deformation of components affecting

performance.

1. Insulation resistance

2. Withstanding voltage

3. Contact resistance

4. Vibration

5. Humidity (Steady state)

6. Temperature cycle

7. Durability

(Insertion/withdrawal)

8. Resistance to

Soldering heat

Ratings 0.5 A

125 V AC

Current rating

Voltage rating

Operating temperature -30

ç

to +70

ç

(Note 1)

Operating humidity 95% R.H. or less

(No condensation)

Storage temperature range

-10çto +60ç(Note 2)

Storage humidity range

40 to 70% (Note 2)

Item Specification Conditions

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during

transportation.

Used with I/O cards, portable personal computers,and the external connections of various small-sized portable

terminals.

■Applications

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B9

I/O cable

■Materials B

Applicable Cab le

Item Material Finish

Remarks

Receptacle

Plug unit

Plug cover

Frame kit

Insulator

Contacts

Body

Insulator

Contacts

Cover

Body

Frame

Spring pin

Coil spring

Panel

Thermoplastic Compound

Copper alloy

Stain less

Thermoplastic Compound

Copper alloy

Thermoplastic Compound

Stainless Steel

Thermoplastic Compound

Phosphor bronze

Stainless steel

Black

Selective gold plating

Solder Plating

Black

Selective gold plating

Black

-

Black

Gold Plating

-

UL94V-0

----

UL94V-0

----

UL94V-0

----

AWG# 28(7/0.127)

0.58mm 0.62mm

UL20276 and

UL2789 UL2990

Conductor size

Cable style

Jacket outer

diameter

Frame ground

terminal

With thermal

adhesive tape

■Ordering Information

NX 60 T A - 15 S AA 9 - SP

1 2 3

11

865 7 9

●Receptacle

NX 30 T A - 15 P AA

1 2 3 4 65 7

●Plug

NX - 15 T A - CV

1

5 3

11 10

●Plug Covers

NX - 15 T - KT 9 (05)

5 3 8

12

10

●Frame Kits

1

NX T - P (05)

3

10

12

1

NX - 32 T - P (05)

5 3

10

12

●Panel (For 9, 15, or 25 contacts)

(For 32 contacts)

SP : Compliant mounting bracket (for cards use)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B10

B

Dimensions of Connector Cross Section

B

Recommended Board Dimensions

(Board Thickness: 0.5 mm Maximum)

●0.9 mm offset type ●0.3 mm offset type

NX-09T-KT9

NX-15T-KT9

NX-25T-KT9

NX-32T-KT9

NX-09T-KT3

NX-15T-KT3

NX-25T-KT3

NX-32T-KT3

09

15

25

32

09

15

25

32

234-0010-8

234-0011-0

234-0012-3

234-0026-8

234-0034-6

234-0035-9

234-0036-1

234-0054-3

26.4

31.2

39.2

44.8

26.4

31.2

39.2

44.8

25.0

29.8

37.8

43.4

25.0

29.8

37.8

43.4

22.4

27.2

35.2

40.8

22.4

27.2

35.2

40.8

06.4

11.2

19.2

24.8

06.4

11.2

19.2

24.8

0.9

0.3

Part Number

Number of contacts

CL No. A B C D offset

Unit: mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B11

■Receptacle

●0.9 mm offset type

●0.3 mm offset type

NX60TA-✽ SAA9-SP

NX60TA-✽ SAA3-SP

NX60TA-09SAA9-SP

NX60TB-15SAA9-SP

NX60TA-25SAA9-SP

NX60T0-32SAA9-SP

09

15

25

32

234-0106-5

234-0097-6

234-0107-8

234-0023-0

25.2

30.0

38.0

43.6

19.7

24.5

32.5

38.1

17.2

22.0

30.0

35.6

06.4

11.2

19.2

24.8

Part Number

Number of contacts

CL No. A B C D

Unit: mm

NX60TA-09SAA3-SP

NX60TB-15SAA3-SP

NX60TA-25SAA3-SP

NX60TA-32SAA3-SP

09

15

25

32

234-0031-8

234-0098-9

234-0033-3

234-0053-0

25.2

30.0

38.0

43.6

19.7

24.5

32.5

38.1

17.2

22.0

30.0

35.6

06.4

11.2

19.2

24.8

Part Number

Number of contacts

CL No. A B C D

Unit: mm

0.3

D

P=0.8

2

•

2

8 1.9

C

B

A

2.9

Ø1

0.9

Contact No.1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B12

NX30TA-09PAA

NX30TA-15PAA

NX30TA-25PAA

NX30TA-32PAA

09

15

25

32

234-0002-0

234-0005-8

234-0008-6

234-0024-2

14.6

19.4

27.4

33.0

14.1

18.9

26.9

32.5

Part Number

Number of contacts

CL No. A B

Unit: mm

■Plug Covers

■Plug units

NX30TA-15PAA

CL234-0005-8

NX-15T-CV

CL234-0006-0

NX-09T-CV

NX-15T-CV

NX-15T-CV1

NX-25T-CV

NX-25TA-CV1

NX-32TA-CV1

09

15

25

32

234-0003-2

234-0006-0

234-0017-7

234-0009-9

234-0039-0

234-0025-5

18.2

23.0

31.0

36.6

21.2

26.0

34.0

40.6

14.0

18.8

26.8

32.4

26

28

30

32

06.0

07.0

05.0

08.0

13.0

16.2

5.5

6.0

4.0

6.5

4.0

4.2

6.5

7.0

5.0

7.5

5.0

less than Ø 5.5

less than Ø 6.0

less than Ø 4.0

less than Ø 6.5

less than Ø 6.5(Note)

less than Ø 7.5(Note)

Part Number

Number of contacts

CL No. A B C D E F G Outer diameter of cable

Unit: mm

Note:

Designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing.

Contact No.1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B13

■Frame kit

■(Frame + 2 X Cover Panels)

■Frame only

NX-09T-KT9

NX-15T-KT9

NX-25T-KT9

NX-32T-KT9

NX-09T-KT3

NX-15T-KT3

NX-25T-KT3

NX-32T-KT3

09

15

25

32

09

15

25

32

234-0010-8

234-0011-0

234-0012-3

234-0026-8

234-0034-6

234-0035-9

234-0036-1

234-0054-3

Part Number

Number of contacts

CL No. Connectors for the card Side(Note 1)

IC1F-68RD-1.27SFA

640-0040-3

640-0035-3

0.9mm

0.3mm

Part Number CL No. Offset NX60TA-09SAA9-SP

NX60TB-15SAA9-SP

NX60TA-25SAA9-SP

NX60TA-32SAA9-SP

NX60TA-09SAA3-SP

NX60TB-15SAA3-SP

NX60TA-25SAA3-SP

NX60TA-32SAA3-SP

Back Connector

NX-09T-F9

NX-15T-F9

NX-25T-F9

NX-32T-F9

NX-09T-F3

NX-15T-F3

NX-25T-F3

NX-32T-F3

09

15

25

32

09

15

25

32

234-0018-0

234-0019-2

234-0020-1

234-0063-4

234-0060-6

234-0061-9

234-0062-1

234-0067-5

Part Number

Number of contacts

CL No.

Connectors for the card Side

IC1F-68RD-1.27SFA

0.9mm

0.3mm

Offset

NX60TA-09SAA9-SP

NX60TB-15SAA9-SP

NX60TA-25SAA9-SP

NX60TA-32SAA9-SP

NX60TA-09SAA3-SP

NX60TB-15SAA3-SP

NX60TA-25SAA3-SP

NX60TA-32SAA3-SP

NXT-P

NX-32T-P

NXT-P

NX-32T-P

NX-CSA

&

NX-CSB

Back Connector Panel Coil Spring

NX-15T-KT9

CL234-0011-0

NX-15T-F9

CL234-0019-2

Unit: mm

Frame Cover

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B14

Unit: mm

NXT-P

CL234-0058-4

NXT-PA

CL234-2011-1

NXT-P

NXT-P(05)

NX-32T-P

NX-32T-P(05)

234-0058-4

234-0058-4-05

234-0059-7

234-0059-7-05

9, 15, 25

32

Silver matt finish

Dull processing material

Silver matt finish

Dull processing material

Part Number CL No.

Number of Frame contacts

Panel Finish

NXT-PA

NXT-PA(05)

NX-32T-PA

NX-32T-PA(05)

234-2011-1

234-2011-1-05

234-0068-8

234-0068-8-05

9, 15, 25

32

Silver matt finish

Dull processing material

Silver matt finish

Dull processing material

Part Number CL No.

Number of Frame contacts

Panel Finish

✽

Panels are avilable in two types: a 32-contact special type and a common type with 9, 15, or 25 contacts.

✽

Ordering volume for panels is one panel per unit volume.One frame corresponds to 2 panels.

■Panel (for type22PCMCIA cards)

■Panel (for type11PCMCIA cards)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B15

■Ground contact spring ■Bushing

■Modular plugs for round cable (AWG #28) connector

■8-Contact adapter

Part Number

NX-CSA

NX-CSB

234-0042-4

234-0043-7 0.3mm: One Packs

CL No.

Offset: Ordering Volume

Sold in package of 1000 pcs.

For 1,000 frames of 0.9 offset, please order two packs of NX-CSA.

For 1,000 frames of 0.3 offset, please order one pack of NX-CSA

and one pack of NX-CSB.

Part Number

NX-25T-BS

NX-32T-BS 234-0074-0

234-0055-6 25

32

CL No. Number of contacts

NX-CSA

CL234-0042-4

Lead Number Reference Table

TM5RL-88-JJ

CL222-3798-7

NX-32T-BS

CL234-0055-6

6 Contacts 8 Contacts

Connector (a) Contact number TM5RL-88

Connector (b) Contact number TM5RL-88 8

8

7

6

5

4

3

2

1

0.3mm: One Pack

0.9mm: Two Packs

No. of contacts

6

8222-2684-2

222-2685-5

TM30P-66P

TM30P-88P

CL No.Part Number

Modular Plug Manual Wiring Tool

CL No.

250-0145-6

250-0146-9

TC1-TM30P-66P

TC1-TM30P-88P

Part Number

Applications for Connections of I/O Card Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B16

B

Plug Termination Tool

Cable wiring cradle

NX/3230-CAT

CL902-0250-4

1. Set the wires in the wiring

fixtures.

4. Set holding plates (A) and (B)

onto the guide plate. 5. Insert the guide plate into the

pressure welding and cutting

fixtures.

6. Pull down the handle. The

wiring and cutting of excess

cable length are completed.

2. Align holding plates (A) and

(B). 3. Arrange the wires one at a time

through holding plates (A) and

(B).

Cutting and IDC termination

Fixture main unit

NX/3230-HP

CL902-0252-0

Cutting and IDC termination

attachment fixtures

NX30TA-9GP

CL902-0253-2

NX30TA-15GP

CL902-0254-5

NX30TA-25GP

CL902-0255-8

NX30TA-32GP

CL902-0257-3

●Wiring Procedure

●Fixtures

➀➁➂

➅➄➃

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B17

B

Frame Kit Fixture

B

Wiring Fixture and Accessories List

Plug

Frame Kit

A frame kit thermal fixture and a cooling fixture are also available.

Ground spring press fitting fixture Special blocks

I/O Cable

Discrete cable

NX30TA-09PAA

NX30TA-15PAA

NX30TA-25PAA

NX30TA-32PAA

NX30TA-09GP

NX30TA-15GP

NX30TA-25GP

NX30TA-32GP

NX-09T-CV0

NX-15T-CV0

NX-15T-CV1

NX-25T-CV

NX-32T-CV1

NX-30TA-9HC

CL902-0260-8

NX-30TA-15HC

CL902-0261-0

NX-30TA-15HC1

CL902-0262-3

NX-30TA-25HC1

CL902-0263-6

Screw Fixing

Cable Connector Process

Wiring

NX/3230-CAT

(All contacts

common)

Press

Pressurs Welding and Cutting

NX/3230-HP

Guide Plate Shield Case Caulking

Cover Case Hand Tool

Hood Fitting

Manual Work

NX-9T-KT(9•3)

NX-15T-KT(9•3)

NX-25T-KT(9•3)

NX-32T-KT(9•3)

Frame Kit

NX-SPT

CL902-0274-2

Process

Spring Pin Press Fitting

Press NX-SPT-9

CL902-0275-5

NX-SPT-15

CL902-0276-8

NX-SPT-25

CL902-0277-0

NX-SPT-32

CL902-0278-3

Unit

NX-PHT

CL902-0282-0

Panel Thermal

Caulking

NX-PCT

CL902-0283-3

Panel Cooling

NX-9T-CV

NX-15T-CV

NX-25T-CV

NX-15T-CV1

Ø 5.1±0.2

Ø 5.7±0.2

Ø 6.5±0.2

Ø 3.8±0.2

Fold the shield and bind 1.5 times with copper tape.

Do,

Crimp with cable sheath directly.

Cover Case Cable Diameter Strand Termination

Note 1: The caulking height of hand tool is defined by follwing cable specifications.

Note 2: Caulking specification change is needed when special cable is used.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B18

■Materials Item Material Finish Remarks

Receptacle

Plug unit

Insulator Synthetic resin Color : Black UL94V-0

Contacts Copper alloy Selective gold plating ----------

Body Stainless steel Solder plating ----------

Insulator Synthetic resin Color : Black UL94V-0

Contacts Copper alloy Selective gold plating ----------

Plug cover Cover Synthetic resin Color : Black UL94V-0

Body Stainless steel ---------- ----------

Frame kit

Frame Synthetic resin Color : Black UL94V-0

FG terminal Phosphor bronze Gold plating ----------

Spring pin Stainless steel ---------- ----------

Coil spring Stainless steel ---------- ----------

Panel Stainless steel

With thermal adhesive tape

----------

100 V DC

100 mA

Contact resistance : 60 mømax.

0.5A

125 V AC

250 Mømin.

300 V AC

40 Mømin.

3000 cycles

1.

Current rating

2.

Voltage rating

3.

Insulation resistance

4.

Withstanding voltage

5.

Contact resistance

6.

Durability (Insertion/withdrawal)

Item Specification Conditions

■Specifications

I/O Cable

Conductor size

Insulator outer diameter

Cable style

AWG #30 (7/0.1)

0.5mm

UL20276

■Features

1. Low pr ofile

Receptacle connectors have a mounting height of 3.5

mm and can be mounted to type II I/O cards.

2. Shielded construction

A metal shell is used for shielding.

3. ESD protection

The use of an over-mold cover offers excellent ESD

protection.

4. More efficient wiring work

Wiring on the plug side uses AWG #30 pressure welding

(discrete type) for more efficient wiring work.

■Applications

I/O card interfaces.

■NX Series 68

■Ordering Information

NX 60 H - 68 S 9 - SP

1 2 3 5 64 7

Series name:NX

Wiring style 30:

Loose lead pressure welding type (for fine wire)

60: SMT type

Serial type for form

Number of contacts: 68

Type of opening S: Receptacle

P: Plug

Coplanarity:

0.9 (Dimension from connector center to board mounting position)

Variations SP: Spring pin (for cards)

Type of accessories CV: Vertical opening cover

KT: Frame kit

Panel finish (05): Dull processing

1

2

3

4

5

7

6

8

9

●Receptacle

NX 30 H - 68 P

1 2 3 54

●Plug unit

NX - 68 H - CV

1

4 3

8

●Plug cover

NX - 68 H - KT 9 (05)

4 3 6

9

8

●Frame kit

Back Connectors for Type II I/O Cards

B

Applicable

No flashover or insulation

breakdown.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B19

■Receptacle

Note 1: The signal pin SMT dimension of this product is 0-0.05.

Note 2: Caulking specification change is needed when special cable is used.

CL No.

234-0078-1

Part Number

NX60H-68S9-SP

+0.1

■Plug Unit

CL No.

234-0079-4

Part Number

NX30H-68P

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B20

■Plug Cover

CL No.

234-0080-3

Part Number

NX-68H-CV

■Frame Kit

Main unit Panel

CL No.

234-0081-6-05

Part Number

NX-68H-KT9(05)

Note 1: Suitable connectors for portion A are IC1F-68RD-1.27SFA.

Suitable connectors for portion B are NX60H-68S9-SP.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B21

Note 1: Applicable connectors for portion A are IC1F-68RD-1.27SFA.

Applicable connectors for portion B are NX60H-68S9-SP.

BRCB mounting pattern (Applicable Board Thickness: 0.5 mm MAX)

B

Connector Mounting

Dimensions (Back conector side)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B22

BTemperature Profile

●Applicable Conditions

Reflow system : IR reflow

Solder : Paste type 63 Sn/37 Pb

(Flux content 9 wt%)

Test board Glass epoxy 47mm x 77.3mm x 0.5 mm

Metal mask thickness: 0.15 mm

●Recommended temperature profile.

The temperature may be slightly changed according to

the solder paste type and amount.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.