1N957
THRU
1N978
0.5W Silicon Planar
Zener Diodes
)HDWXUHV
• Zener Voltage 6.8V to 51V
• Silicon Planar Power Zener Diodes
• Standards zener voltage tolerance is ±20%, Add suffix “A” for
±10% tolerance and suffix “B” for ±5% tolerance, non standards
and higher zener voltage upon request
0D[LPXP5DWLQJV
Symbol Value Units
Zener Current See Table 1
Power Dissipation
@ TA=25oC Ptot 500 mW
Junction Temperature TJ 175 oC
Storage Temperature
Range TSTG -65 to 175 oC
(OHFWULFDO&KDUDFWHULVWLFV#
°
&8QOHVV2WKHUZLVH6SHFLILHG
Symbol Maximum Unit
Thermal resistance R
-$
300 oC/W
Forward Voltage
@ IF=200mA VF 1.5 V
NOTE:
Valid provided that a distance of 8mm from case are kept at
ambient temperature
0HFKDQLFDO'DWD
•
Case: DO-35 glass case
•
Polarity: Color band denotes cathode end
•
Weight: Approx. 0.13 gram
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
A
B
C
D
D
Cathode
Mark
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A--- .166 --- 4.2
B--- .079 --- 2.00
C--- .020 --- .52
D1.000 --- 25.40 ---
DO-35
www.mccsemi.com
Revision: 3 2002/12/31
ZENER
VOLTAGE3)
@TEST
CURRENT
MAXIMUM ZENER
IMPEDANCE1)
MAXIMUM REVERSE
LEAKAGE CURRENT
TEST-VOLTAGE
MAXIMUM
ZENER
CURRENT
VZ I
ZT Z
ZT ZZK I
ZK I
R2) Suffix A Suffix B IZM2)
TYPICAL
TEMP.
COEFFICIENT
MCC
PART
NUMBER
V mA
mA
A V V mA %/
:
1N957 6.8 18.5 4.5 700 1.0 150 4.9 5.2 47 0.050
1N958 7.5 16.5 5.5 700
0.5 75 5.4 5.7 42 0.058
1N959 8.2 15 5.5 700
0.5 50 5.9 6.2 38 0.062
1N960 9.1 14 5.5 700
0.5 10 6.6 6.9 35 0.068
1N961 10 12.5 5.5 700
0.25 5 7.2 7.6 32 0.075
1N962 11 11.5 5 700 0.25
5 8.0 8.4 28 0.076
1N963 12 10.5 11.5 700 0.25
5 8.6 9.1 26 0.077
1N964 13 9.5 13 700 0.25 5
9.4 9.9 24 0.079
1N965 15 8.5 16 700 0.25 5
10.8 11.4 21 0.082
1N966 16 7.8 17 700 0.25 5
11.5 12.2 19 0.083
1N967 18 7.0 21 750 0.25 5
13.0 13.7 17 0.085
1N968 20 6.2 25 750 0.25 5
14.4 15.2 15 0.086
1N969 22 5.6 29 750 0.25 5
15.8 16.7 14 0.087
1N970 24 5.2 33 750 0.25 5
17.3 18.2 14 0.088
1N971 27 4.6 41 750 0.25 5
19.4 20.6 11 0.090
1N972 30 4.2 49 1000 0.25 5
21.6 22.8 10 0.091
1N973 33 3.8 58 1000 0.25 5
23.8 25.1 9.0 0.092
1N974 36 3.4 70 1000 0.25 5
25.9 27.4 8.5 0.093
1N975 39 3.2 80 1000 0.25 5
28.1 29.7 7.8 0.094
1N976 43 3.0 93 1500 0.25 5
31.0 32.7 7.0 0.095
1N977 47 2.7 105 1500 0.25 5
33.8 35.8 6.4 0.095
1N978 51 2.5 125 1500 0.25 5
36.7 38.8 5.9 0.096
Note:
1) The Zener impedance is derived from the 1kHz AC voltage which results when an AC current having an RMS
value equal to 10% of the Zener current (IZT) is superimposed on IZT Zener impedance is measured at two points
to insure a sharp knee on the breakdown curve and to eliminate unstable units.
2) Valid provided that leads are kept at ambient temperature at a distance of 8mm from case.
3) Measured with device junction in thermal equilibrium.
MCC
1N957 thru 1N978
www.mccsemi.com
Revision: 3 2002/12/31
