NUMBER TYPE PRODUCT SPECIFICATION GS-12-672 TITLE PAGE REVISION 1 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series B AUTHORIZED BY DATE T.Ishishita 2015-05-13 CLASSIFICATION UNRESTRICTED 1. 1. Scope 1.27mm SATA 7P This specification defines the performance, requirements for the 1.27mm pitch SATA 7P Connector Signal Cable Harness Series . 2. 2. Applicable standards 2.1 EIA 364 Electrical Connector/Socket Test Procedures Including Environmental Classifications 2.2 UL94 Tests for flammability of plastic materials for parts in devises and appliances. 3. 3. Material and plating Item name 1.27mm SATA7P 1.27mm pitch SATA7P Cable connector Parts name Housing Back cover Contact Over mold Conductor Insulation SATA SATA cable Drain wire Shield Jacket Solder Material Finish etc. Note () Heat resistant resin (Halogen free) UL94V-0 Black (UL94V-0) Copper alloy Contact area : Gold plating over nickel base plating Solder-tail area : Tin plating over nickel base plating UL94V-0 Black (UL94V-0) AWG : 30 Construction : 1/0.254mm White AWG : 30 Construction : 1/0.254mm Black () Heat resistant resin (Halogen free) Solid Tinned Copper () Heat resistant resin (Halogen free) Solid Tinned Copper - Aluminum-Polyester laminated tape () Heat resistant resin (Halogen free) Sn96.5-Ag3.0-Cu0.5 ()(Lead free) This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE PRODUCT SPECIFICATION GS-12-672 TITLE PAGE REVISION 2 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY B DATE T.Ishishita 2015-05-13 CLASSIFICATION UNRESTRICTED 4. SATA 4. Specifications of SATA cable and solder. Item name SATA SATA cable Solder Specifications See individual specifications See individual specifications 5. 5. Design and Construction 1.27mm SATA7P 1.27mm SATA7P EIA 364-18 5.1 : 1.27mm SATA7P 1.27mm SATA7P The 1.27mm pitch SATA7P Cable connector shall be mated with the 1.27mm pitch SATA7P plug connectors. Visual examination of 1.27mm pitch SATA7P Cable connector shall be done per EIA 364-18. 5.1 Mating :The 1.27mm pitch SATA7P Cable connector shall be capable of mating and unmating manually without the use of special tools. 6. 6. RATING Rating Value Voltage Rating Current Rating 30V (AC/DC) 1.5A (AC/DC) Operating temperature range -10 to +80 () Including temperature rises according to the current flows. Storage temperature range -20 to +80 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 3 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 7. 7. PARFORMANCE 9 5 1 1535 2080. 650mmHg800mmHg(86kpa106kpa) Unless otherwise specified, when tested the ambient conditions as described below and evaluated with the sequence listed in Table 5, there shall meet the requirements listed in Table 1 and 2, 3. And, there shall meet the requirements listed in Table 4. Temperature: 15 to 35 Relative humidity: 25% to 80. Atmospheric pressure: 650mmHg to 800mmHg (86kpa to 106kpa) This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 4 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY B DATE T.Ishishita 2015-05-13 CLASSIFICATION UNRESTRICTED Para. Electrical requirements Low level contact resistance(LLCR) Insulation resistance Dielectric withstanding voltage 1 Table1. Electrical requirements Requirements 85m (SATA 30m+SATA SATA 5m+SATA 100mm 50m 20m (SATA 15m+SATA SATA +SATA 100mm 5m Initial:85mMax (Initial 85m is total value of SATA connector:30mmax, joint area between SATA connector and SATA cable:5m max and SATA cable less than 100mm length:50mmax). Final:20mMax (Final 20m is total value of SATA connector:15mmax, joint area between SATA connector and SATA cable, SATA cable less than 100mm length:5mmax). <SATA )> 500M 500M <SATA > 1000M 1000M <Increasing SATA connector, joint area between SATA connector and SATA cable > Initial:500MMin. Final:500MMin. <SATA connector only> Initial:1000MMin. Final:1000MMin. 0.5mA No evidence of arc-over or insulation breakdown. (Current leakage: 0.5mA Max.) Condition 8.1 8.2 8.3 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 5 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series B AUTHORIZED BY DATE T.Ishishita 2015-05-13 CLASSIFICATION UNRESTRICTED Para. Mechanical requirements Cable pull-out 2 Table2. Mechanical requirements Requirements Condition No physical damage. 8.4 Cable flexing 1us No physical damage. No discontinuity over 1 us during the test. 8.5 Insertion force 45N 45N Max 8.6 Removal force 10N 50 10N Min (through 50 cycles) 8.7 No physical damage. There shall meet the specification of contact resistance before and after the test. 8.8 Durability This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 6 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED Para. 3 Table3. Environmental requirements Requirements Condition 1us No physical damage. No discontinuity over 1us during the test. 8.9 Random vibration 1us No discontinuity over 1 us during the test. 8.10 Humidity 1 See NOTE 1. 8.11 Temperature life 1 See NOTE 1. 8.12 Thermal shock 1 See NOTE 1. 8.13 Mixed flowing Gas 1 See NOTE 1. 8.14 Environmental requirements Physical shock NOTE 1EIA 364-18 7. 1Shall meet EIA 364-18 Visual Examination requirements, show no physical damage, and shall meet requirements of additional tests as specified in the test sequence in section 7.0 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 7 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED Environmental requirements Para. 4 Table4. Signal integrity requirements Requirements Condition Differential Impedance 100ohms15% (+85ohms to +115ohms) 10.1 Cable Pair Matching Impedance 5ohms(-5ohms to +5ohms) 10.2 +25ohms to +40ohms 10.3 Insertion Loss -6 dB max 10.4 (NEXT) Crosstalk(NEXT) -26 dB 10.5 ISI Inter-Symbol Interference (Jitter ISI) +50 ps max 10.6 Intra-Pair Skew +10 ps max 10.7 Common Mode Impedance This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 8 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 8. -1 8. Test method-1 8.1 1 SATA SATA 100A 20V EIA 364-23 SATA SATA SATA 100mm 8.1 Low level contact resistance (LLCR) Measuring under the following conditions : (EIA 364-23) The measuring data is included the conductor resistance of joint area between SATA Cable connector and SATA cable, SATA cable less than 100mm length. Method of connection: See Fig 1. The following details shall apply: (a) Test current : 100 mA Max (b) Open circuit voltage : 20 mV Max 1. Fig.1 Contact resistance measuring method 8.2 SATA SATA DC 500V 1 EIA 364-21 8.2 Insulation resistance Measuring under the following conditions : (EIA 364-21) The measuring condition is unmated SATA Cable connector or SATA connector to SATA plug. The following details shall apply: (a) Test Voltage : 500 V DC for 1 minute (b) Points of Measurement : Between adjacent contact 8.3 SATA SATA AC 500V 1 EIA 364-20 Method B 8.3 Dielectric Withstanding Voltage Measuring under the following conditions : (EIA 364-20 Method B) The measuring condition is unmated SATA Cable connector or SATA connector to SATA plug. The following details shall apply: (a) Test Voltage : 500V AC for 1 minute (b) Points of Measurement : Between adjacent contact This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 9 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 8.4 SATA 2 SATA 40N 1 EIA 364-38 Condition A 8.4 Cable pull-out Measuring under the following conditions : (EIA 364-38 Condition A) A test axial load 40N is subjected to the SATA cable for 1minute. Cable pull-out direction: See Fig 2. The following details shall apply: (a) Test axial load : 40N for 1minute 2. Fig.2 Cable pull-out direction 8.5 SATA SATA EIA 364-41 Condition I (a) 90 (b) 100 180 8.5 Cable flexing Measuring under the following conditions : (EIA 364-41 Condition I) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Rotate direction : A transverse of 180 in one direction plus 180 in the opposite direction shall call one cycle. (b) Duration : 100 cycles. 8.6 SATA SATA 12.5mm / min EIA 364-13 8.6 Insertion force Measuring under the following conditions : (EIA 364-13) When SATA Cable connector is inserted to SATA plug, insertion forces shall conform to the following details. (a) Insertion speed : 12.5mm / minute This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 10 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 8.7 SATA SATA 12.5mm / min EIA 364-13 8.7 Removal force Measuring under the following conditions : (EIA 364-13) When SATA Cable connector is removed from SATA plug, removal forces shall conform to the following details. (a) Removal speed : 12.5mm / minute 8.8 200cycles/hour 50 EIA 364-09 8.8 Durability Measuring under the following conditions : (EIA 364-09) The measuring condition is mated and unmated SATA Cable connector to SATA plug. The following details shall apply: (a) Test speed : 200 cycles / hour (b) cycles : 50 cycles 8.9 SATA SATA (EIA 364-27 Condition H ) (a) : 294 m/s2 (30G), 11ms, (b) : 3 6 ( 18 ) 8.9 Physical shock Measuring under the following conditions : (EIA 364-27 Condition H) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Test condition : 294 m/s2 (30G), 11ms, half-sine (b) Number of shock : 6 shocks along each of three perpendicular axes 18 total This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 11 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 8.10 SATA SATA (EIA 364-28 Test Condition V Test letter A ) (a) : 502000 Hz (b) : XYZ 0.5 ( 1.5 ) (c) : 0.02G2/Hz 8.10 Random Vibration Measuring under the following conditions : (EIA 364-28 Test Condition V Test letter A) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Frequency range : Random 502000 Hz, 5.35 g's RMS overall (b) Duration : 0.5 hours for each of three perpendicular axes (Total 1.5 hours) (c) Power Spectral Density : 0.02G2/Hz 8.11 SATA SATA 21 (EIA364-31 Method Test Condition A ) (a) : 40 2 (b) : 9095% R.H. (c) : 96 8.11 Humidity Measuring under the following conditions : (EIA364-31 Method Test Condition A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 40 2 (b) Relative Humidity : 9095% R.H. (c) Test times : 96 hours 8.12 SATA SATA 21 (EIA364-17 Test Condition Method A ) (a) : 85 2 (b) : 500 8.12 Temperature life Measuring under the following conditions : (EIA364-17 Test Condition Method A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 85 2 (b) Test times : 500 hours This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 12 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 8.13 SATA SATA 3 21 (EIA364-32, Test Condition) (a) : - 55 30 85 30 (b) : 10 8.13 Thermal Shock Measuring under the following conditions : (EIA364-17 Test Condition Method A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. Method of 1 cycle: See Fig 3. The following details shall apply: (a) Temperature : 30 min to -55,30 min to +85 (b) Cycle : 10 cycles 85 Room -55 30min. 30min. Cycle 3. 1 Fig.3 Method of 1 cycle 8.14 SATA SATA SATA SATA 21 (EIA 364-65, Class 2A) (a) : 30 2 (b) : 70 2% R.H. (c) : Cl2 103ppb, NO2 20050ppb, H2S 105ppb, SO2 10020ppb 8.14 Mixed flowing Gas Measuring under the following conditions : (EIA 364-65, Class 2A) Half of the samples are exposed unmated for seven days, then mated for remaining seven days. Other half of the samples are mated during entire testing. The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 30 2 (b) Relative Humidity : 70 2% R.H (c) Gas Concentration : Cl2 103ppb, NO2 20050ppb, H2S 105ppb, SO2 10020ppb This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 13 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 9. 9. Test sequence 5 Test sequence is shown in Table 5. 5. Table 5. Test sequence Test group Test item A B C D E 1 Examination of the connector(s) 2 Low level contact resistance(LLCR) 3 Insulation resistance 4 Dielectric withstanding voltage 5 Insertion force 6 Removal force 7 (*) (*) Durability 8 Physical shock 9 Random vibration 10 Humidity 11 Temperature life (3 ) 12 Reseating(manually unplug/plug three times) 13 Thermal shock 14 Mixed flowing Gas NOTE (*) 200cycles/hour 20 (*) Preconditioning, 20 cycles for the 50-durability cycle requirement. The insertion and removal cycle is at the maximum rate of 200 cycles per hour. Test Method 8.1 8.2 8.3 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 14 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 10. -2 10. Test method-2 10.1 SATA SATA EIA 364-108 SATA rev3.0 (EIA364-108 or SATA rev3.0) (a) : Time Domain Parameter (b) : 50 10 Ohms (c) : 70[ps] 20-80% 10.1 Differential Impedance Measuring under the following conditions : (EIA 364-108 or SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Time Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) The step pulse risetime (system risetime) : 70[ps] 20-80% 10.2 SATA SATA SATA rev3.0 (SATA rev3.0) (a) : Time Domain Parameter (b) : 50 10 Ohms (c) : 70[ps] 20-80% 10.2 Cable Pair Matching Impedance Measuring under the following conditions : (SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Time Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) The step pulse risetime (system risetime) : 70[ps] 20-80% 10.3 SATA SATA SATA rev3.0 (SATA rev3.0) (a) : Time Domain Parameter (b) : 50 10 Ohms (c) : 70[ps] 20-80% This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 15 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 10.3 Common Mode Impedance Measuring under the following conditions : (SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Time Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) The step pulse risetime (system risetime) : 70[ps] 20-80% 10.4 SATA SATA EIA 364-101 SATA rev3.0 (EIA 364-101 or SATA rev3.0) (a) : Frequency Domain Parameter (b) : 50 10 Ohms (c) : 104500MHz 10.4 Insertion Loss Measuring under the following conditions : (EIA 364-101 or SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Frequency Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) Frequency range : 10 to 4500 MHz 10.5 NEXT SATA SATA EIA 364-108 SATA rev3.0 (EIA 364-108 or SATA rev3.0) (a) : Frequency Domain Parameter (b) : 50 10 Ohms (c) : 104500MHz 10.5 Crosstalk (NEXT) Measuring under the following conditions : (EIA 364-108 or SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Frequency Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) Frequency range : 10 to 4500 MHz This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 16 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series AUTHORIZED BY T.Ishishita B DATE 2015-05-13 CLASSIFICATION UNRESTRICTED 10.6 ISI SATA SATA EIA 364-107 SATA rev3.0 (EIA 364-107 or SATA rev3.0) (a) : Time Domain Parameter (b) : 50 10 Ohms 10.6 Inter-Symbol Interference (Jitter ISI) Measuring under the following conditions : (EIA 364-107 or SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Frequency Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms 10.7 SATA SATA SATA rev3.0 (SATA rev3.0) (a) : Time Domain Parameter (b) : 50 10 Ohms (c) : 35[ps] 20-80% 10.7 Inter-Pair Skew Measuring under the following conditions : (SATA rev3.0) The measuring condition is mated SATA Cable connector to SATA plug mounting on under the following test PCB. The following details shall apply: (a) Test parameter : Time Domain Parameter (b) Test PCB : The all traces controlled impedance within 50 10 Ohms (c) The step pulse risetime (system risetime) : 35[ps] 20-80% This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 NUMBER TYPE GS-12-672 PRODUCT SPECIFICATION TITLE PAGE REVISION 17 of 17 1.27 SATA 7P 1.27mm pitch SATA 7P Connector Signal Cable Harness Series B AUTHORIZED BY DATE T.Ishishita 2015-05-13 CLASSIFICATION UNRESTRICTED 11. 11. Notice Application specification GS-20-138 Please be sure to look through application specification (GS-20-138) of relevance in the case of use of this product. REVISION RECORD REV PAGE REVISION ECR# DATE A ALL RELEASED J10-0210 2010-10-14 B 14,15,16 Change from 2.6 to 3.0 for SATA Revision ELX-J-20877 2015-05-13 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 PDS: Rev :B STATUS:Released Printed: May 13, 2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: FCI / Amphenol: 10115005-7SR470HLF 10115005-7SR500HLF