3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly
2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series
• Mates with Hard Metric/Compact PCI®
IEC 61076-4-101 backplane connectors, UHM
headers, HSHM headers
• Hard Metric 2 mm × 2 mm grid spacing
• Fully-shielded coaxial or twin axial interface
• Standard or custom wafer stacks
• Range of high performance cable - 50 Ω, 75 Ω coax,
85 Ω, 100 Ω twin axial
• Power wafer
• Semi-rigid stacking system reduces insertion force
• Mix-and-match custom options
Date Modified: October 15, 2010 TS-2364-A
Sheet 1 of 5
Physical
Connector/Insulation Material: LCP
Flammability: UL 94V-0
Connector Contact Material: Copper alloy
Plating:
Underplating: 100 µ" (2.54 µm) Avg. Nickel
Contact Interface: [30 μ″ ] Gold minimum wipe area
Ground Shield Contact:
Underplating: 100 µ" (2.54 µm) Avg. Nickel overall
Overplating: 10 µ" (0.25 µm) Avg. Gold
Electrical
Cable Voltage Rating: 30 V
Cable Current Rating: 1 A min. (Rating is application dependent)
Cable Insulation Resistance: >100 Megohms at 500 VDC
Cable Withstanding Voltage: 500 VDC for 1 minute
Cable Characteristic Impedance: 50 Ω and 75 Ω single ended assemblies, 85 Ω and 100 Ω differential assemblies
Environmental
Cable Temperature Rating: -20 to +80°C Minimum UL File No.: E86982
Mechanical
Cable Connector Insertion Force: 0.3 N [1.35 pounds]/Single wafer max
Cable Connector Withdrawal Force: 0.11 N [0.50 pounds]/Single wafer max
Cable Retention Force: 44.5 N [10 pounds] minimum
Cable Connector Durability: 50 Mating Cycles
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly
2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series
TS-2364-A
Sheet 2 of 5
Ordering Information
98XXXX-XXX-XXX.X-X-X-XX
Right and Left Connectors:
a b c d e
12 = 1 Coax G S G X X
13 = 1 Coax X X G S G
15 = 2 Coax G S G S G
17 = 2 Twin Axial S S G S S
19 = 1 Twin Axial S S G X X
20 = 1 Twin Axial X X G S S
XX = Custom, contact 3M
Coax Cable Type:
027 = 50 Ω Cable, 26 AWG
105 = 50 Ω Cable, 28 AWG
054 = 75 Ω Cable, 30 AWG
Twin Axial Cable Type:
058 = 100 Ω Twin Axial, 26 AWG
122 = 85 Ω Twin Axial, 25 AWG Cable Configuration:
C = Pin A to Pin A (Ref Figure A)
D = Transmit to Receive (Ref Figure B)
Length:
Tip-to-tip in inches
Ground Pattern:
1 = Ground to C Row
Number of Wafer Assemblies in Harness:
1 through 26
Shielded Controlled Impedance (SCI) Wafer Receptacle
mm
[Inch]
Tolerance Unless Noted
.0 .00 .000
mm ±.3 ±.15
[ ] Dimensions for
Reference Only
Assembly Tolerance
<36" ± 0.5"
36" to 120" ± 1.0"
Minimum Assembly Length = 4 inches
If all 25 positions are needed, end cap
extends 2 mm over position one end.
Space headers at 2 mm gap.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly
2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series
TS-2364-A
Sheet 3 of 5
S1
S2
G3
S4
S5
S1
S2
G3
S4
S5
S1
S2
G3
S4
S5
S1
S2
G3
S4
S5
Figure B
(Transmit to Recieve)
Twin Axial
Figure A
S = Signal / G = Ground / NC = Not Connected
G1
S2
G3
S4
G5
G5
S4
G3
S2
G1
Figure B2
(Transmit to Recieve)
Coax
(PIN 1 to PIN 1)
Twin Axial shown
G1
S2
G3
S4
G5
G1
S2
G3
S4
G5
Figure A2
Coax
Cable Configuration
UHM Cable Assemblies (Standard Assemblies)
Socket Style Order Number (Add Cable Length) # Assemb.
UHM B110 981717-058-XXX.X-C-1-22
UHM C055 981717-058-XXX.X-C-1-11
UHM B095 981717-058-XXX.X-C-1-19
UHM A110 981717-058-XXX.X-C-1-11 (2)
UHM B125 981717-058-XXX.X-C-1-25
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly
2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series
TS-2364-A
Sheet 4 of 5
Twin Axial Cable
A
B
C
(Double Shielded)
D
A (2 Places)
B
C
D
Physical Properties (Typical)
Cable Type Dielectric Material Shield Jacket
058
Twin Axial 100 Ω
26 AWG, Solid
Silver Plated Copper
0.455 mm
[0.018]
Air & PTFE Dual layer braid
FEP
Brown
1.55 x 2.49 mm O.D.
[.061" x .098" O.D.]
122
Twin Axial
85 Ω ±
5 Ω
24.5 AWG, Solid SPC
0.483 mm [0.019] Air & PTFE Braid
FEP
Burgundy
1.73 x 2.67 mm O.D.
[.068" x .105" O.D.]
Coaxial Cable
A
B
C
D
C
D
A
B
Physical Properties (Typical)
Cable Type Dielectric Material Shield Jacket
027
Coax 50 Ω
26 AWG, 7/34,
Silver Plated Copper
0.48 mm O.D.
[.019" O.D.]
Air & PTFE
Dual layer silver plated
copper wire served
shield
FEP
Blue
1.80 mm O.D.
[.071" O.D.]
105
Coax 50 Ω
28 AWG, 19/40
Silver Plated Copper
0.33 mm O.D.
[.013" O.D.]
Foamed FEP Silver plated braid
FEP
Black
1.65 mm O.D.
[.065" O.D.]
048
Coax 75 Ω
30 AWG, 7/38,
Silver Plated Copper
0.31 mm O.D.
[.012" O.D.]
Air & PTFE Silver plated braid
FEP
Gray
1.88 mm O.D.
[.074" O.D.]
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly
2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series
TS-2364-A
Sheet 5 of 5
Coaxial and Twin Axial Cable
Electrical Properties (Typical)
Cable Type Capacitance Propagation Delay Attenuation
Coaxial Cable
027
Coax 50 Ω 74.5 pF/m Max
[22.7 pF/ft]
3.81 nS/m
[1.16 nS/ft ] -8.23 dB (typical) / 10 m @ 650 MHz
105
Coax 50 Ω 87 pF/m Max
[26.5 pF/ft]
4.2 nS/m
[1.28 nS/ft ] -3 dB (typical) / 3 m @ 500 MHz
054
Coax 75 Ω 51.2 pF/m Max
[16 pF/ft]
4.00 nS/m
[1.22 nS/ft ] -4.76 dB (typical) / 10 m @ 650 MHz
Twin Axial Cable
058
Twin Axial 100 Ω 42.6 pF/m Max
[13.0 pF/ft]
4.17 nS/m
[1.27 nS/ft ] -7.79 dB (typical) / 10 m @ 650 MHz
122
Twin Axial 85 Ω ± 5 Ω 45.88 pF/m Max
[14.0 pF/ft]
3.87 nS/m
[1.18 nS/ft ] Contact 3M
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.
