GBP2005 thru GBP210 GLASS PASSIVATED REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes BRIDGE RECTIFIERS GBP FEATURES Surge overload rating - 60 amperes peak Ideal for printed circuit board .110X45 (2.8) Plastic material has underwriters laboratory .580(14.75) .561(14.25) .150(3.8) .126(3.2) flammability classification 94V-0 Mounting position: Any .417(10.60) .410(10.20) .043(1.1) .028(0.7) .106(2.7) .091(2.3) .610(15.5) .571(14.5) .056(1.42) .046(1.17) .034(.86) .030(.76) .160(4.06) .140(3.56) .024(0.6) .012(0.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL GBP 2005 GBP 201 GBP 202 GBP 204 GBP 206 GBP 208 GBP 210 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 30 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current @ TA=50 I(AV) 2.0 A IFSM 60 A VF 1.1 V IR 10.0 uA IR 1.0 mA TJ -55 to +150 TSTG -55 to +150 Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Maximum Forward Voltage Drop Per Bridge Element at 2.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage Per Element Maximum Reverse Current at Rated DC Blocking Voltage Per Element Operating Temperature Range Storage Temperature Range TA=100 ~ 291 ~ RATING AND CHARACTERTIC CURVES GBP2005 thru GBP210 FIG.2-MAXIMUM NON-REPETITIVE SUNRGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 2.0 CASE AMBIENT 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.00 0.1 0 20 40 60 100 80 120 140 50 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 40 30 20 10 0 0 TEMPERATURE, C 10 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL JUNCTION CAPACITANCE FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 10 T J=25,f=1MHZ 1.0 0.1 1.0 4.0 10.0 100 1.0 T J = 25C 0.1 PULSE WIDTH 300us 0.01 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANCEOUS REVERSE CURRENT, u A) CAPACITANCE,(pF) 5 2 T J=150 100 T J=125 10 T J=100 1.0 0.1 T J=25 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 292 ~ 1.8