© Semiconductor Components Industries, LLC, 2011
October, 2011 − Rev. 11
1Publication Order Number:
MMBT3904LT1/D
MMBT3904L, SMMBT3904L
General Purpose Transistor
NPN Silicon
Features
•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
•AEC−Q101 Qualified and PPAP Capable
•S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector−Emitter Voltage VCEO 40 Vdc
Collector−Base Voltage VCBO 60 Vdc
Emitter−Base Voltage VEBO 6.0 Vdc
Collector Current − Continuous IC200 mAdc
Collector Current − Peak (Note 3) ICM 900 mAdc
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Total Device Dissipation FR−5 Board
(Note 1) @TA = 25°C
Derate above 25°C
PD225
1.8
mW
mW/°C
Thermal Resistance, Junction−to−Ambient RqJA 556 °C/W
Total Device Dissipation Alumina
Substrate, (Note 2)
@TA = 25°C
Derate above 25°C
PD
300
2.4
mW
mW/°C
Thermal Resistance, Junction−to−Ambient RqJA 417 °C/W
Junction and Storage Temperature TJ, Tstg −55 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR−5 = 1.0 0.75 0.062 in.
2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina.
3. Reference SOA curve.
COLLECTOR
3
1
BASE
2
EMITTER
http://onsemi.com
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
SOT−23 (TO−236)
CASE 318
STYLE 6
MARKING DIAGRAM
1AM = Specific Device Code
M = Date Code*
G= Pb−Free Package
*Date Code orientation and/or overbar may
vary depending upon manufacturing location.
(Note: Microdot may be in either location)
1
2
1
3
1AM M G
G
Device Package Shipping†
ORDERING INFORMATION
MMBT3904LT3G SOT−23
(Pb−Free)
MMBT3904LT1G
SMMBT3904LT1G
SOT−23
(Pb−Free)
3000 / Tape &
Reel
10,000 / Tape &
Reel
MMBT3904L, SMMBT3904L
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector−Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 40 −Vdc
Collector−Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO 60 −Vdc
Emitter−Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 6.0 −Vdc
Base Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) IBL −50 nAdc
Collector Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) ICEX −50 nAdc
ON CHARACTERISTICS (Note 4)
DC Current Gain
(IC = 0.1 mAdc, VCE = 1.0 Vdc)
(IC = 1.0 mAdc, VCE = 1.0 Vdc)
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 50 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
HFE 40
70
100
60
30
−
−
300
−
−
−
Collector−Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
(IC = 50 mAdc, IB = 5.0 mAdc)
VCE(sat)
−
−
0.2
0.3
Vdc
Base −Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
(IC = 50 mAdc, IB = 5.0 mAdc)
VBE(sat) 0.65
−
0.85
0.95
Vdc
SMALL−SIGNAL CHARACTERISTICS
Current−Gain − Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) fT300 −MHz
Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo −4.0 pF
Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo −8.0 pF
Input Impedance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hie 1.0 10 kW
Voltage Feedback Ratio (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hre 0.5 8.0 X 10−4
Small−Signal Current Gain (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hfe 100 400 −
Output Admittance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hoe 1.0 40 mmhos
Noise Figure (VCE = 5.0 Vdc, IC = 100 mAdc, RS = 1.0 k ohms, f = 1.0 kHz) NF −5.0 dB
SWITCHING CHARACTERISTICS
Delay Time (VCC = 3.0 Vdc, VBE = −0.5 Vdc,
IC = 10 mAdc, IB1 = 1.0 mAdc)
td−35
ns
Rise Time tr−35
Storage Time (VCC = 3.0 Vdc,
IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc)
ts−200 ns
Fall Time tf−50
4. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
Figure 1. Delay and Rise Time
Equivalent Test Circuit
Figure 2. Storage and Fall Time
Equivalent Test Circuit
+3 V
275
10 k
1N916 CS < 4 pF*
+3 V
275
10 k
CS < 4 pF*
< 1 ns
-0.5 V
+10.9 V
300 ns
DUTY CYCLE = 2%
< 1 ns
-9.1 V′
+10.9 V
DUTY CYCLE = 2%
t1
0
10 < t1 < 500 ms
* Total shunt capacitance of test jig and connectors
MMBT3904L, SMMBT3904L
http://onsemi.com
3
TYPICAL TRANSIENT CHARACTERISTICS
Figure 3. Capacitance
REVERSE BIAS VOLTAGE (VOLTS)
2.0
3.0
5.0
7.0
10
1.0
0.1
Figure 4. Charge Data
IC, COLLECTOR CURRENT (mA)
5000
1.0
VCC = 40 V
IC/IB = 10
Q, CHARGE (pC)
3000
2000
1000
500
300
200
700
100
50
70
2.0 3.0 5.0 7.0 10 20 30 50 70 100 200
CAPACITANCE (pF)
1.0 2.0 3.0 5.0 7.0 10 20 30 40
0.2 0.3 0.5 0.7
QT
QA
Cibo
Cobo
TJ = 25°C
TJ = 125°C
Figure 5. Turn −On Time
IC, COLLECTOR CURRENT (mA)
70
100
200
300
500
50
Figure 6. Rise Time
IC, COLLECTOR CURRENT (mA)
TIME (ns)
1.0 2.0 3.0 10 20 70
5100
t , RISE TIME (ns)
Figure 7. Storage Time
IC, COLLECTOR CURRENT (mA)
Figure 8. Fall Time
IC, COLLECTOR CURRENT (mA)
5.0 7.0 30 50 200
10
30
7
20
70
100
200
300
500
50
1.0 2.0 3.0 10 20 70
5100
5.0 7.0 30 50 200
10
30
7
20
70
100
200
300
500
50
1.0 2.0 3.0 10 20 70
5100
5.0 7.0 30 50 200
10
30
7
20
70
100
200
300
500
50
1.0 2.0 3.0 10 20 70
5100
5.0 7.0 30 50 200
10
30
7
20
r
t , FALL TIME (ns)
f
t , STORAGE TIME (ns)
s
′
VCC = 40 V
IC/IB = 10
VCC = 40 V
IB1 = IB2
IC/IB = 20
IC/IB = 10
IC/IB = 10
tr @ VCC = 3.0 V
td @ VOB = 0 V
40 V
15 V
2.0 V
IC/IB = 10
IC/IB = 20
IC/IB = 10
IC/IB = 20
t′s = ts - 1/8 tf
IB1 = IB2
MMBT3904L, SMMBT3904L
http://onsemi.com
4
TYPICAL AUDIO SMALL−SIGNAL CHARACTERISTICS
NOISE FIGURE VARIATIONS
(VCE = 5.0 Vdc, TA = 25°C, Bandwidth = 1.0 Hz)
Figure 9.
f, FREQUENCY (kHz)
4
6
8
10
12
2
0.1
Figure 10.
RS, SOURCE RESISTANCE (k OHMS)
0
NF, NOISE FIGURE (dB)
1.0 2.0 4.0 10 20 40
0.2 0.4
0100
4
6
8
10
12
2
14
0.1 1.0 2.0 4.0 10 20 40
0.2 0.4 100
NF, NOISE FIGURE (dB)
f = 1.0 kHz IC = 1.0 mA
IC = 0.5 mA
IC = 50 mA
IC = 100 mA
SOURCE RESISTANCE = 200 W
IC = 1.0 mA
SOURCE RESISTANCE = 200 W
IC = 0.5 mA
SOURCE RESISTANCE = 500 W
IC = 100 mA
SOURCE RESISTANCE = 1.0 k
IC = 50 mA
h PARAMETERS
(VCE = 10 Vdc, f = 1.0 kHz, TA = 25°C)
Figure 11. Current Gain
IC, COLLECTOR CURRENT (mA)
70
100
200
300
50
Figure 12. Output Admittance
IC, COLLECTOR CURRENT (mA)
h , CURRENT GAIN
h , OUTPUT ADMITTANCE ( mhos)
Figure 13. Input Impedance
IC, COLLECTOR CURRENT (mA)
Figure 14. Voltage Feedback Ratio
IC, COLLECTOR CURRENT (mA)
30
100
50
5
10
20
2.0
3.0
5.0
7.0
10
1.0
0.1 0.2 1.0 2.0 5.0
0.5 10
0.3 0.5 3.0
0.7
2.0
5.0
10
20
1.0
0.2
0.5
oe
h , VOLTAGE FEEDBACK RATIO (X 10 )
re
h , INPUT IMPEDANCE (k OHMS)
ie
0.1 0.2 1.0 2.0 5.0 10
0.3 0.5 3.0
0.1 0.2 1.0 2.0 5.0 10
0.3 0.5 3.0
2
1
0.1 0.2 1.0 2.0 5.0 10
0.3 0.5 3.0
fe
m
-4
MMBT3904L, SMMBT3904L
http://onsemi.com
5
TYPICAL STATIC CHARACTERISTICS
Figure 15. DC Current Gain
IC, COLLECTOR CURRENT (mA)
10
100
1000
0.1
h , DC CURRENT GAIN
10
1100
1.0 1000
FE
VCE = 1.0 V
TJ = +150°C
+25°C
-55°C
Figure 16. Collector Saturation Region
IB, BASE CURRENT (mA)
0.4
0.6
0.8
1.0
0.2
0.1
V , COLLECTOR EMITTER VOLTAGE (VOLTS)
0.5 2.0 3.0 100.2 0.3
01.00.7 5.0 7.0
CE
IC = 1.0 mA
TJ = 25°C
0.070.050.030.020.01
10 mA 30 mA 100 mA
MMBT3904L, SMMBT3904L
http://onsemi.com
6
Figure 17. Collector Emitter Saturation Voltage
vs. Collector Current
Figure 18. Base Emitter Saturation Voltage vs.
Collector Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
10.10.010.001
0
0.1
0.2
0.3
0.4
0.6
0.7
0.8
10.10.010.0010.0001
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Figure 19. Base Emitter Voltage vs. Collector
Current
IC, COLLECTOR CURRENT (A)
10.10.010.0010.0001
0.2
0.4
0.6
0.8
1.0
1.2
1.4
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
VBE(on), BASE−EMITTER VOLTAGE (V)
0.5
IC/IB = 10
150°C
25°C
−55°C
IC/IB = 10
150°C
25°C
−55°C
VCE = 1 V
150°C
25°C
−55°C
Figure 20. Temperature Coefficients
IC, COLLECTOR CURRENT (mA)
-0.5
0
0.5
1.0
0 60 80 120 140 160 180
20 40 100
COEFFICIENT (mV/ C)
200
-1.0
-1.5
-2.0
°
+25°C TO +125°C
-55°C TO +25°C
+25°C TO +125°C
-55°C TO +25°C
qVC FOR VCE(sat)
qVB FOR VBE(sat)
VCE (Vdc)
1001010.10.01
0.001
0.01
0.1
1
IC (A)
Single Pulse Test
@ TA = 25°C
Thermal Limit
100 ms
1 s 10 ms
1 ms
Figure 21. Current Gain Bandwidth vs.
Collector Current
IC, COLLECTOR CURRENT (mA)
10001001010.1
10
100
1000
fT
, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VCE = 1 V
TA = 25°C
Figure 22. Safe Operating Area
MMBT3904L, SMMBT3904L
http://onsemi.com
7
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AP
ǒmm
inchesǓ
SCALE 10:1
0.8
0.031
0.9
0.035
0.95
0.037
0.95
0.037
2.0
0.079
SOLDERING FOOTPRINT*
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
D
A1
3
12
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
VIEW C
L
0.25
L1
q
e
EE
b
A
SEE VIEW C
DIM
A
MIN NOM MAX MIN
MILLIMETERS
0.89 1.00 1.11 0.035
INCHES
A1 0.01 0.06 0.10 0.001
b0.37 0.44 0.50 0.015
c0.09 0.13 0.18 0.003
D2.80 2.90 3.04 0.110
E1.20 1.30 1.40 0.047
e1.78 1.90 2.04 0.070
L0.10 0.20 0.30 0.004
0.040 0.044
0.002 0.004
0.018 0.020
0.005 0.007
0.114 0.120
0.051 0.055
0.075 0.081
0.008 0.012
NOM MAX
L1
H
2.10 2.40 2.64 0.083 0.094 0.104
HE
0.35 0.54 0.69 0.014 0.021 0.029
c
0−−− 10 0 −−− 10
q°°°°
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
MMBT3904LT1/D
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
