EX-10
Ultra-slim Photoelectric Sensor
Amplifier built-in
extraordinarily small
and slim size
226
SERIES
Smallest body, just 3.5 mm 0.138 in thick
High-speed response time: 0.5 ms
Flexible mounting
It can be mounted in a very small space
as its size is just W10H14.5D3.5 mm
W0.394H0.571D0.138 in (thru-
beam, front sensing type).
The sensor is suitable for detecting
small and high-speed traveling objects.
The diffuse reflective type sensor is
front sensing and is so thin that it gives
an impression of being just pasted on
the mounting base. The thru-beam
type is available as front sensing type,
as well as, side sensing type, allowing
flexible mounting.
Diffuse reflective
•Front sensing type
Thru-beam
•Front sensing type •Side sensing type
Operation mode switch
Thru-beam type sensor incorporated
with an operation mode switch on the
bifurcation is also available. It helps
you to test the operability before start-
up.
Bright 2-color indicator Waterproof
A convenient 2-color indicator has
been incorporated in the miniature
body.
Ten times durable
Flexible cable on EX-10-R is 10 times
as durable as conventional model. It is
most suitable for moving parts, such as
robot arm, etc.
The sensor can be hosed down
because of its IP67 construction and
the non-corrosive stainless steel
mounting bracket.
Note: However, take care that if it is exposed to
water splashes during operation, it may
detect a water drop itself.
Red beam makes beam alignment easy
The red LED beam projected from the
emitter helps you to align the sensor
heads.
2-color indicator
Red: Operation indicator
(
Green: Stability indicator
)
SENS.SENS.
EXEX
-17-17
SENS.SENS.
EXEX
-17-17
Operation mode switch
Operation indicator
(Orange)
Even for the thru-beam
type sensor, only three
wires have to be con-
nected.
Amplifier Built-in
Conforming to EMC Directive
(Excluding EX-15/17)
UL Recognition
(Excluding 5 m cable length type)
08/2005
227
EX-10
APPLICATIONS
Verifying position of PCBs Detecting ICs Detecting PCB rack
EX-14
Transparent stick
IC EX-15
EX-19
Detecting wafer cassette Detecting thin ring Checking for absence of capacitor
in tray
EX-14
Guide
EX-13E
EX-14
Mountable with M3 screws
Minimum sensing object: "1 mm "0.039 in
Long sensing range: 1 m 3.281 ft (EX-19)
Non-corrosive stainless steel type
mounting bracket is also available.
•
MS-EX10-1 [Cold rolled carbon steel (SPCC)]
and MS-EX10-11 [Stainless steel (SUS304)]
(mounting bracket for the front sensing type)
•
MS-EX10-2 [Cold rolled carbon steel (SPCC)]
and MS-EX10-12 [Stainless steel (SUS304)]
(mounting bracket for the side sensing type)
•
MS-EX10-3 [Cold rolled carbon steel (SPCC)]
and MS-EX10-13 [Stainless steel (SUS304)]
(L-shaped mounting bracket)
EX-11, EX-11E, EX-15 and EX-15E
are incorporated with "1 mm "0.039 in
slit masks so that "1 mm "0.039 in, or
more, object can be detected. Hence,
they are suitable for precise positioning or
small parts detection.
A sensing range of 1 m 3.281 ft has
been realized with a slim size of just
3.5 mm 0.138 in. It can be used to
detect even wide IC trays.
Background suppression (EX-14)
•Not affected by background
Even a specular background sepa-
rated by 100 mm 3.937 in, or more,
is not detected.
However, the background should be
directly opposite.
•Black object reliably detected
It can reliably detect dark color ob-
jects since it is convergent reflective
type.
M3 screws
M3 screws
M3 screws
1 m
3.281 ft
100 mm
3.937 in
Background
The best distance is
approx. 10 mm 0.394 in
from the object.
()
08/2005
228
EX-10
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
ORDER GUIDE
500 mm
19.685 in
150 mm 5.906 in
500 mm
19.685 in
150 mm 5.906 in
500 mm
19.685 in
150 mm 5.906 in
500 mm
19.685 in
2 to 25 mm 0.079 to 0.984 in (Note)
(Convergent point: 10 mm 0.394 in)
150 mm 5.906 in
Type Appearance Sensing range Model No.
Output operation
Output
Thru-beam
NPN output
Convergent
reflective
(Diffused beam type)
Front sensing
Front sensing
Side sensing
With operation mode
switch on the bifurcation
With operation mode
switch on the bifurcation
EX-11A
EX-11B
EX-13A
EX-13B
EX-19A
EX-19B
EX-15
EX-17
EX-11EA
EX-11EB
EX-13EA
EX-13EB
EX-15E
EX-17E
EX-14A
EX-14B
EX-11A-PN
EX-11B-PN
EX-13A-PN
EX-13B-PN
EX-19A-PN
EX-19B-PN
EX-11EA-PN
EX-11EB-PN
EX-13EA-PN
EX-13EB-PN
EX-14A-PN
EX-14B-PN
500 mm
19.685 in
150 mm 5.906 in
500 mm
19.685 in
2 to 25 mm 0.079 to 0.984 in (Note)
(Convergent point: 10 mm 0.394 in)
150 mm 5.906 in
Thru-beam
PNP output
Convergent
reflective
(Diffused beam type)
Front sensing
Front sensing Side sensing
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
1 m
3.281 ft
1m
3.281 in
Note: The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should be
directly opposite.)
Switchable
either Light-ON
or Dark-ON
NPN open-collector transistor
PNP open-collector transistor
Switchable
either Light-ON
or Dark-ON
NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting
brackets (six types).
08/2005
229
EX-10
ORDER GUIDE
Flexible cable type and 5 m 16.404 ft cable length type
Flexible cable type and 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) are also available.
•Table of model Nos.
EX-11A
EX-11B
EX-13A
EX-13B
EX-19A
EX-19B
EX-15
EX-17
EX-11EA
EX-11EB
EX-13EA
EX-13EB
EX-15E
EX-17E
EX-14A
EX-14B
EX-11A-R
EX-11B-R
EX-13A-R
EX-13B-R
EX-19A-R
EX-19B-R
EX-11EA-R
EX-11EB-R
EX-13EA-R
EX-13EB-R
EX-14A-R
EX-14B-R
EX-11A-C5
EX-11B-C5
EX-13A-C5
EX-13B-C5
EX-19A-C5
EX-19B-C5
EX-15-C5
EX-17-C5
EX-11EA-C5
EX-11EB-C5
EX-13EA-C5
EX-13EB-C5
EX-15E-C5
EX-17E-C5
EX-14A-C5
EX-14B-C5
Thru-beam
Front sensing
With operation
mode switch on
the bifurcation
With operation
mode switch on
the bifurcation
Side sensing
Front sensing
Convergent
reflective
(Diffused beam type)
Type Standard Flexible cable (2 m 6.562 ft) type 5 m 16.404 ft cable length type
08/2005
230
EX-10
Slit on both sides
Sensing range: 500 mm 19.685 in [EX-19]
300 mm 11.811 in [EX-13]
Min. sensing object:
"
1.5 mm
"0.059 in
Designation Model No. Description
Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
L-shaped mounting bracket [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
Slit on one side
Sensing range: 600 mm 23.622 in [EX-19]
250 mm 9.843 in [EX-13, EX-17]
Min. sensing object: "2 mm "0.079 in
Slit on both sides
Sensing range: 400 mm 15.748 in [EX-19]
200 mm 7.874 in [EX-13, EX-17]
Min. sensing object: "1.2 mm "0.047 in
Slit on one side
Sensing range: 800 mm 31.496 in [EX-19]
350 mm 13.780 in [EX-13]
Min. sensing object: "2 mm "0.079 in
Slit on one side
Sensing range: 250 mm 9.843 in [EX-13E, EX-17E]
Min. sensing object: "2 mm "0.079 in
Slit on both sides
Sensing range: 200 mm 7.874 in [EX-13E, EX-17E]
Min. sensing object: "1.2 mm "0.047 in
Mounting screws with washers (50 pcs. lot). It can mount
securely as it is spring washer attached.
Sensor
mounting
bracket
Slit mask
Mounting screw
MS-EX10-1
MS-EX10-2
MS-EX10-3
MS-EX10-11
MS-EX10-12
MS-EX10-13
OS-EX10-12
(Slit size "1.2 mm "0.047 in)
OS-EX10-15
(Slit size "1.5 mm "0.059 in)
OS-EX10E-12
(Slit size "1.2 mm "0.047 in)
CHX-SC2
MS-M2
Sensor checker
(Note)
It is useful for beam alignment of thru-beam type sensors.
The optimum receiver position is given by indicators, as
well as an audio signal.
OPTIONS
Sensor mounting bracket
•MS-EX10-1 •MS-EX10-11
•MS-EX10-2 •MS-EX10-12
•MS-EX10-3 •MS-EX10-13
Slit mask
•OS-EX10-12 •OS-EX10E-12
•OS-EX10-15
Example of mounting
(OS-EX10E-12)
Tighten along with the sensor
mounting bracket.
Sensor checker
•CHX-SC2
LEVEL
POWER
CHX-SC2
Sensor checker
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 8 mm 0.315 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 8 mm 0.315 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Cold rolled carbon
steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in)
pan head screws, and two
M2 (length 8 mm 0.315 in)
pan head screws are attached.
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in)
pan head screws [stainless steel
(SUS304)] and two M2 (length
8 mm 0.315 in) pan head screws
[stainless steel (SUS304)] are
attached.
08/2005
231
EX-10
12 to 24 V DC10 % Ripple P-P 10 % or less
<NPN output type>
NPN open-collector transistor
•Maximum sink current: 50 mA
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 1 V or less (at 50 mA sink current)
0.4 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
•Maximum source current: 50 mA
•Applied voltage: 30 V DC or less (between output andV)
•Residual voltage: 1 V or less (at 50 mA source current)
0.4 V or less (at 16 mA source current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or
stable dark condition)
3 (Industrial environment)
IP67 (IEC)
25 to55 C 13 to131 F(No dew condensation or icing allowed), Storage:30 to70 C 22 to158 F
35 to 85 % RH, Storage: 35 to 85 % RH
Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face
EN 50081-2, EN 50082-2, EN 60947-5-2
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm
2
3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm
2
, or more, cable
(thru-beam type: emitter and receiver).
Thru-beam
Thru-beam •with operation mode switch on bifurcation
Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensing
EX-11A(-PN)EX-11EA(-PN)EX-13A(-PN)EX-13EA(-PN)EX-19A(-PN)EX-14A(-PN)
EX-15 EX-15E EX-17 EX-17E
EX-11B(-PN)EX-11EB(-PN)EX-13B(-PN)EX-13EB(-PN)EX-19B(-PN)EX-14B(-PN)
(Note 2) (Note 2) (Note 2) (Note 2)
NPN open-collector transistor
•Maximum sink current: 100 mA
•Applied voltage: 30 V DC or less
(between output and 0 V)
•Residual voltage: 1.5 V or less
(at 100 mA sink current)
•Residual voltage: 0.4 V or less
(at 16 mA sink current)
"0.1 mm "0.004 in
copper wire
Setting distance:
10 mm 0.394 in
"2 mm "0.079 in
opaque object
Setting distance between
emitter and receiver:
1 m 3.281 ft
Type
Light-ON
Item Dark-ON
Sensing range
Min. sensing object
Hysteresis
Repeatability
(perpendicular to sensing axis)
Supply voltage
Current consumption
Output
Utilization category
Short-circuit protection
Response time
Operation indicator
Incident beam indicator
Stability indicator
Pollution degree
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
EMC
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
Cable (Note 4)
Cable extension
Weight
Accessories
SPECIFICATIONS
Model
No.
(Note 1)
150 mm 5.906 in
"1 mm "0.039 in opaque object
Setting distance between
emitter and receiver:
150 mm 5.906 in
500 mm 19.685 in 1 m 3.281 ft
2 to 25 mm 0.079 to
0.984 in (Note 3)
(Conv. point: 10 mm 0.394 in)
15 % or less of
operation distance
0.1 mm 0.004 in
or less
Convergent reflective
(Diffused beam type)
0.05 mm 0.002 in or less0.05 mm 0.002 in or less
Orange LED (lights up when the output is ON),
located on the bifurcation
Red LED (lights up under light received condition),
located on the receiver
Green LED (lights up under stable light received condition
or stable dark condition), located on the receiver
20 mA or less
30 mA or lessEmitter: 10 mA or less, Receiver: 15 mA or less
150 mm 5.906 in 500 mm 19.685 in
()
"2 mm "0.079 in opaque object
Setting distance between
emitter and receiver:
500 mm 19.685 in
()
"1 mm "0.039 in opaque object
Setting distance between
emitter and receiver:
150 mm 5.906 in
()
"2 mm "0.079 in opaque object
Setting distance between
emitter and receiver:
500 mm 19.685 in
()
()
Mounting screws: 1 set
Mounting screws:
1 set
Emitter: 20 g approx., Receiver: 20 g approx.
Enclosure: Polyethylene terephthalate
Lens: Polyalylate, Bifurcation: Polyalylate
0.2 mm
2
3-core cabtyre cable, 2 m 6.562 ft long (beyond bifur-
cation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)
Extension up to total 100 m 328.084 ft is
possible with 0.3 mm2, or more, cable.
Mounting screws: 1 set, Adjusting screwdriver: 1 pc.
55 g approx.
20 g approx.
Notes: 1) Model Nos. having the suffix ‘-PN’ are PNP output type.
Notes: 2) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).
Notes: 3) The sensing range of convergent reflective type sensor is specified for white non-glossy paper (5050 mm 1.9691.969 in) as the object.
Notes: 4)
The flexible cable type (model Nos. having suffix
‘
-R
’
) has a 0.1 mm
2
3-core (thru-beam type emitter : 2-core) flexible cabtyre cable, 2 m 6.562 ft long.
Environmental resistance
()
08/2005
232
EX-10
I/O CIRCUIT AND WIRING DIAGRAMS
EX-11EX-13
EX-19EX-14
I/O circuit diagram
NPN output type
PNP output type
NPN output type
Wiring diagram
Users’ circuitInternal circuit
Color code
50 mA max.
Sensor circuit
Tr
D
ZD
Load
(Brown)V
(Black)
Output (Note)
(Blue) 0 V
12 to 24 V DC
10 %
Note: The emitter of the thru-beam type sensor does not
incorporate the output.
Note: The emitter of the thru-beam type sensor does not
incorporate the black wire.
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor
Brown
Black (Note)
Blue
Load
12 to 24 V DC
10 %
EX-11-PN EX-13-PN
EX-19-PN EX-14-PN
Users’ circuitInternal circuit
D
50 mA max.
ZD
Tr
Load
(Black) Output (Note)
(Blue) 0 V
12 to 24 V DC
10 %
Sensor circuit
Color code
(Brown)V
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr : PNP output transistor
EX-15 EX-15E
EX-17 EX-17E
I/O circuit diagram Wiring diagram
Users’ circuitInternal circuit
Color code
100 mA max.
Sensor circuit
Tr
D
ZD
Load
(Brown)V
(Black) Output
(Blue) 0 V
12 to 24 V DC
10 %
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor
12 to 24 V DC
10 %
Load
Brown
Black
Blue
Brown
Black (Note)
Blue
Load
12 to 24 V DC
10 %
Note: The emitter of the thru-beam type sensor does not
incorporate the output.
Note: The emitter of the thru-beam type sensor does not
incorporate the black wire.
I/O circuit diagram Wiring diagram
08/2005
233
EX-10
All models
SENSING CHARACTERISTICS (TYPICAL)
Correlation between setting distance and excess gain
01
3.281
3
9.843
4
13.123
5
16.404
1
10
5
100
2
6.562
Excess gain
50
Setting distance L (m ft)
EX-19
Thru-beam type
EX-19
Parallel deviation Angular deviation
Parallel deviation with slit masks ("1.2 mm "0.047 in) Parallel deviation with slit masks ("1.5 mm "0.059 in)
Thru-beam type
200
7.874
100
3.937
0 100
3.937
200
7.874
0
500
19.685
1,000
39.370
Receiver
Emitter
L
#
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
40 20 0 20 40
0
500
19.685
1,000
39.370
L
$
Receiver
Emitter
Setting distance L (mm in)
Left Right
Center
Operating angle $( )
EX-11EX-11E
EX-15EX-15E
Parallel deviation Angular deviation
Thru-beam type
Receiver
Emitter
Receiver
100
3.937
50
1.969
050
1.969
100
3.937
0
Left Right
Center
Operating point ?(mm in)
200
7.874
100
3.937
150
5.906
EX-11
EX-15
EX-11
EX-15
EX-11E
EX-15E
EX-11E
EX-15E
L
#L
#
Setting distance L (mm in)
Emitter
50
1.969
Emitter
Receiver
Emitter
Receiver
20 10 0 10 20
0
50
1.969
100
3.937
150
5.906
200
7.874
Left Right
Center
Operating angle $( ° )
EX-11
EX-15
EX-11
EX-15
EX-11E
EX-15E
L
$
L
$
Setting distance L (mm in)
EX-11E
EX-15E
200
7.874
100
3.937
0 100
3.937
200
7.874
0
200
7.874
400
15.748
600
23.622
800
31.496
Slit on one side
Slit on both sides
Receiver
Emitter
L
#
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
200
7.874
100
3.937
0 100
3.937
200
7.874
0
500
19.685
1,000
39.370
Slit on one side
Slit on both sides
Receiver
Emitter
L
#
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
EX-13EX-13E
EX-17EX-17E
Parallel deviation Angular deviation
Parallel deviation with slit masks ("1.2 mm "0.047 in) Parallel deviation with slit masks ("1.5 mm "0.059 in)
Thru-beam type
40
1.575
20
0.787
020
0.787
40
1.575
0
EX-13/17
Slit on one side
Receiver
Emitter
L
#
400
15.748
300
11.811
200
7.874
100
3.937
EX-13/17
Slit on both sides
EX-13E
/
17E
Slit on one side
EX-13E/17E
Slit on
both sides
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
100
3.937
50
1.969
050
1.969
100
3.937
0
Slit on one side
or both sides
Slit on one side,
sensing range: 350 mm 13.78 in
Slit on both sides,
sensing range: 300 mm 11.81 in
Receiver
Emitter
L
#
400
15.748
300
11.811
200
7.874
100
3.937
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
Emitter
Receiver
Emitter
Receiver
100
3.937
50
1.969
050
1.969
100
3.937
0
Left Right
Center
Operating point ?(mm in)
200
7.874
400
15.748
600
23.622
800
31.496
EX-13
EX-17
EX-13
EX-17
EX-13E
EX-17E
EX-13E
EX-17E
L
#L
#
Setting distance L (mm in)
Emitter
Receiver
Receiver
20 10 0 10 20
Left Right
Center
Operating angle $( ° )
EX-13
EX-17
L
$L
$
Emitter
EX-13
EX-17
0
200
7.874
400
15.748
600
23.622
800
31.496
EX-13E
EX-17E
EX-13E
EX-17E
Setting distance L (mm in)
08/2005
234
EX-10
Operation mode switch
L : Light-ON
D: Dark-ON
Lights up when the output is
ON.
Operation indicator (Orange)
Switch
position Description
•Vertical (up and down) direction
SENSING CHARACTERISTICS (TYPICAL)
Convergent reflective type
Sensing fields
•
Horizontal (left and right) direction
Correlation between lightness and sensing range
Correlation between material (5050 mm 1.9691.969 in) and sensing range
5
0.197
10
0.394
05
0.197
10
0.394
0
10
0.394
20
0.787
30
1.181
40
1.575
White
N4
7 mm
0.276 in
#
L
Setting distance L (mm in)
Left Right
Center
Operating point ?(mm in)
5050 mm 1.9691.969 in
Non-glossy paper
0
10
0.394
20
0.787
30
1.181
40
1.575
N2 N4 N6 N8
Lightness LightDark
N2N1 N3 N4 N5 N6 N7 N8 N9
Sensing range L (mm in)
Sensing region
Distance to
convergent point
0
20
0.787
10
0.394
40
1.575
60
2.362
80
3.150
Sensing range L (mm in)
Black circuit board
Black rubber sheet
IC tray (Black)
Glass epoxy printed circuit board
(Green masked surface)
Ceramic circuit board
White non-glossy paper
Stainless steel plate
Aluminum plate
(Hair line)
Aluminum-evaporated mirror
Distance to convergent point
EX-14
The sensing region is represent-
ed by oblique lines in the left
figure. However, the sensitivity
should be set with enough mar-
gin because of slight variation in
products.
Lightness shown on the left
may differ slightly from the
actual object condition.
The bars in the graph indicate the
sensing range for the respective
material. However, there is a
slight variation in the sensing
range depending on the product.
Further, if there is a reflective
object (conveyor, etc.) in the
background of the sensing object,
since it affects the sensing,
separate it by more than twice the
sensing range shown in the left
graph.
5
0.197
10
0.394
05
0.197
10
0.394
0
10
0.394
20
0.787
30
1.181
40
1.575
White
N4
#
7.75
mm
0.305 in
L
Setting distance L (mm in)
Down Up
Center
Operating point ?(mm in)
5050 mm
1.9691.969 in
Non-glossy paper
()
The tightening torque should be 0.2 Nm or less.
Dark-ON mode is set when the switch is turned fully
counterclockwise (D side).
The tightening torque should be 0.2 Nm or less.
•
In case of using attached screws and nuts (Unit: mm in)
PRECAUTIONS FOR PROPER USE
This product is not a safety sensor. Its use is not
intended or designed to protect life and prevent body
injury or property damage from dangerous parts of
machinery. It is a normal object detection sensor.
Mounting
•In case of mounting on tapped holes (Unit: mm in)
Side sensing Front sensing
Side sensing Front sensing
M20.4 0.016 hole
tapped, 6 0.157 deep
Attached
screw
[M2 (length 10 0.394)]
11
0.433
Sensing
direction
Sensing
direction
M20.4 0.016 hole
tapped, 7 0.276 deep
[M2 (length 8 0.315)]
Attached
screw
11
0.433
Thickness of
mounting plate: 2 0.079 or less
Attached
screw
[M2 (length 10 0.394)]
Thickness of
mounting plate: 2.5 0.098 or less
Spring
washers
Nuts
Flat washers
[M2 (length 8 0.315)]
Attached
screw
Sensing
direction
Sensing
direction
11
0.433
11
0.433
Operation mode switch (EX-15, EX-15E, EX-17and EX-17Eonly)
Light-ON mode is set when the switch is turned fully
clockwise (L side).
Others
•Do not use during the initial transient time (50ms)
(EX-15, EX-15E, EX-17, EX-17E: 100 ms) after
the power supply is switched on.
08/2005
235
EX-10
EX-11AEX-11BEX-13A
EX-13BEX-19AEX-19B
Sensor
Emitter Receiver
2-"2.2 "0.087
mounting holes
Beam-
emitting
part
11
0.433
1.75 0.069
4.5
0.177
14.5
0.571
5.5
0.217
10
0.394
1.75 0.069
2.1
0.083
3.5
0.138
"2.5 "0.098 cable, 2 m 6.562 ft long
6.5
0.256
4
0.157
2.1
0.083
4
0.157
3.5
0.138
5.5
0.217
10
0.394
6.45
0.254
Beam-
receiving
part
2-"2.2 "0.087
mounting holes
"2.5 "0.098 cable, 2 m 6.562 ft long
11
0.433
1.75
0.069
4.5
0.177
14.5
0.571
1.5
0.059
6.5
0.256
Stability
indicator
(Green)
Operation
indicator
(Red)
1.75
0.069
EX-11EAEX-11EB
EX-13EAEX-13EB
Sensor
Emitter Receiver
2-"2.2 "0.087
mounting holes
"2.5 "0.098 cable, 2 m 6.562 ft long
11
0.433
1.75 0.069
4.5
0.177
14.5
0.571
10
0.394
1.75 0.069
6.5
0.256
4
0.157
Beam-
emitting
part
4.5
0.177
2.25
0.089
4.2
0.165
Stability
indicator (Green)
Operation
indicator (Red)
Beam-
receiving
part
4.5
0.177
2.25
0.089
4.2
0.165
4
0.157
10
0.394
6.45
0.254
1.75
0.069
2-"2.2 "0.087
mounting holes
"2.5 "0.098 cable, 2 m 6.562 ft long
11
0.433
1.75
0.069
4.5
0.177
14.5
0.571
1.5
0.059
6.5
0.256
EX-15
EX-17 Sensor EX-15E
EX-17E Sensor
Emitter EmitterReceiver Receiver
500
19.685
2.1
0.083
3.5
0.138
38
1.496
15.2 0.598
8
0.315
7
0.276
1 0.039
1.75
0.069
5.5
0.217
4
0.157
4.5
0.177
1.5
0.059
19.2
0.756
11
0.433
1.75
0.069
6.45 0.254
Beam-
receiving
part
Incident beam indicator (Red)
Stability indicator (Green)
5.5
0.217
1.75
0.069
11
0.433
4
0.157
10
0.394
10 0.394
1.75
0.069
2-"2.2 "0.087
mounting holes
"2.5 "0.098 cables
Operation mode switch
Operation indicator
(Orange)
2-"2.2 "0.087
mounting holes
Beam-
emitting
part
2.1
0.083
3.5
0.138
"3.8 "0.150 cable,
2 m 6.562 ft long
14.5
0.571
4.5
0.177
14.5
0.571
Operation mode switch
500
19.685
38
1.496
15.2 0.598
8
0.315
7
0.276
1 0.039
19.2
0.756
Beam-
emitting
part
4
0.157
11
0.433
1.75
0.069
1.75
0.069
10
0.394
6.45
0.254
4.2
0.165
1.75
0.069
4.2
0.165
2.25
0.089
4.5
0.177
4.5
0.177
14.5
0.571
11
0.433
1.75
0.069
4
0.157
10
0.394
1.5
0.059
14.5
0.571
4.5
0.177
Operation indicator
(Orange)
"2.5 "0.098 cables
2-"2.2 "0.087
mounting holes
Beam-
receiving
part
Stability indicator (Green)
Incident beam indicator (Red)
2-"2.2 "0.087
mounting holes
2.25
0.089
4.5
0.177
"3.8 "0.150 cable,
2 m 6.562 ft long
DIMENSIONS (Unit: mm in)
08/2005
236
EX-10
DIMENSIONS (Unit: mm in)
EX-14A
EX-14BSensor
Stability indicator
(Green)
Operation
indicator (Red)
1.75
0.069
2.75
0.108
6.45
0.254
13
0.512
2.1
0.083
3.5
0.138
4.5
0.177
Beam-
receiving
part
Beam-emitting part
2-"2.2 "0.087 mounting holes
"2.5 "0.098 cable,
2 m 6.562 ft long
4.5
0.177 14.5
0.571
11
0.433
1.5
0.059
1.75
0.069
8
0.315
5
0.197
MS-EX10-1 Sensor mounting bracket (Optional)
4-M20.4 0.016
thru-hole threads 2-"3.4 "0.134 mounting holes
6.5
0.256
11
0.433
15
0.591
8
0.315
7.6
0.299
3.5
0.138
20
0.787
8
0.315
3.7
0.146
t 1.2
t 0.047
Beam-
emitting
part
Beam-
receiving
part
3
0.118
5
0.197
10.75
0.423
4.25
0.167
1.25
0.049
t 1.2
t 0.047
3.7
0.146
3.5
0.138
20 0.787
13
0.512
22.75 0.896
7.6
0.299
(0.7)
(0.028)
(
4.9)
(0.193)
3.5
0.138
8
0.315
(8.8)
(0.346)
15
0.591
11
0.433
8
0.315
2-"3.4 "0.134 mounting holes
Assembly dimensions
Mounting drawing with EX-14
MS-EX10-2 Sensor mounting bracket (Optional)
2-M20.4 0.016
thru-hole threads
t 1.2
t 0.047
15
0.591
11
0.433
20
0.787
6.25
0.246
8
0.315 3.5
0.138
8
0.315
1.4
0.055
3.2
0.126
7.6
0.299
10
0.394
7.6
0.299
3.2
0.126
0.25
0.010
4.25
0.167
1.4
0.055
1.25
0.049
2.5 0.098
t 1.2
t 0.047
6.25
0.246
4.5
0.177
(1.3)
(0.051)
11
0.433
15
0.591
8
0.315
8
0.315
3.5
0.138
20
0.787
Beam-
receiving
part
4
0.157
(7.45)
(0.293)
(2.3)
(0.091)
Assembly dimensions
Mounting drawing with EX-11Eand EX-13E
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in) pan head screws are attached.
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M2 (length 8 mm 0.315 in) pan head
screws are attached.
08/2005
237
EX-10
DIMENSIONS (Unit: mm in)
MS-EX10-3 Sensor mounting bracket (Optional)
4-M20.4 0.016
thru-hole threads
2
0.079
6.5
0.256
3.2
0.126
8
0.315
10.8
0.425
7 0.276 10.5
0.413
1.4
0.055
11
0.433
15
0.591
t 1.2
t 0.047
Beam-
receiving part
Beam-
emitting part
(2.75)
(0.108)
10.8
0.425
t 1.2
t 0.047
(0.7)
(0.028)
13
0.512
5
0.197
1.75 0.069
1.25
0.049
3
0.118
11
0.438
15
0.591
4.25
0.167
3.5
0.138 10.5
0.413
3.2
0.126
1.4
0.055
8
0.315
6.25
0.246
7
0.276
Assembly dimensions
Mounting drawing with EX-14
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M2 (length 4 mm 0.157 in) pan head screws, and two M2
(length 8 mm 0.315 in) pan head screws are attached.
Assembly dimensions
Mounting drawing with EX-14
MS-EX10-11 Sensor mounting bracket (Optional)
4-M20.4 0.016
thru-hole threads
11
0.433
3.2
0.126
1.4
0.055
3.2
0.126
1.4
0.055
15
0.591
20
0.787
6.5
0.256
3.5
0.138
8
0.315
8
0.315
8.1
0.319
t 1.2
t 0.047
3.7
0.146
11
0.433
3.2
0.126
1.4
0.055
3.2
0.126
1.25
0.049
4.25
0.167
1.4
0.055
15
0.591
22.75
0.896
3.5
0.138
8
0.315
3
0.118
8.1
0.319
20
0.787
t 1.2
t 0.047
3.7
0.146
3.5
0.138
(4.9)
(0.193)
(0.7)
(0.028)
13
0.512
5
0.197
10.75 0.423
Beam-emitting part
Beam-receiving part
(9.3)
(0.366)
8 0.315
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are
attached.
MS-EX10-12 Sensor mounting bracket (Optional)
2-M20.4 0.016
thru-hole threads
11
0.433
3.2
0.126
1.4
0.055
3.2
0.126
1.4
0.055
15
0.591
6.25
0.246
20
0.787
8
0.315
8.1
0.319
t 1.2
t 0.047
8
0.315
3.5
0.138
15
0.591
11
0.433
4
0.157
3.5
0.138
3.2
0.126
2.5
0.098
8.1
0.319
20
0.787
(7.45)
(0.293)
(2.3)
(0.091)
6.25
0.246
4.5
0.177
t 1.2
t 0.047
(1.3)
(0.051)
Beam-
receiving
part
8
0.315
10
0.394
8
0.315
0.25
0.010
1.4
0.055
1.25
0.049
3.2
0.126
1.4
0.055
4.25
0.167
Assembly dimensions
Mounting drawing with EX-11Eand EX-13E
Material: Stainless steel (SUS304)
Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are
attached.
08/2005
238
EX-10
DIMENSIONS (Unit: mm in)
MS-EX10-13 Sensor mounting bracket (Optional)
4-M20.4 0.016
thru-hole threads
t 1.2
t 0.047
10.8
0.425
11
0.433
10.5
0.413
6.5 0.256
3.2 0.126
2
0.079
15
0.591
7
0.276
1.4
0.055
1.4 0.055
8
0.315
3.2 0.126
11
0.433
3.2
0.126
1.25
0.049
4.25
0.167
15
0.591
8
0.315
3
0.118
3.2
0.126
1.4
0.055
13
0.512
10.5
0.413
3.5
0.138
1.75
0.069
10.8
0.425
5
0.197
1.4
0.055
Beam-emitting
part
Beam-receiving
part
t 1.2
t 0.047
(2.75)
(0.108)
(0.7)
(0.028)
6.25
0.246 7
0.276
Assembly dimensions
Mounting drawing with EX-14
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in) pan
head screws [stainless steel (SUS304)]
and two M2 (length 8 mm 0.315 in) pan
head screws [stainless steel (SUS304)]
are attached.
08/2005