ecision Thin Thin FilmFilm Nichrome Precision ip Resistor Nichrome Chip Resistor PCF Series Precision * TCR to 5 ppm/CThin Film Nichrome o 5 ppm/C * Tolerances to 0.05% Chip nces to 0.05% * AvailableResistor in 8 standard sizes ries * * ble in 8 standard sizes Wide ohmic range 10 to 2.0M ohmic range 10 to 2.0M Pb-free terminations PCFRoHS Series compliant compliants Pb-free TCR to 5terminations ppm/C s s s s Matte tin Plating Tolerances to 0.05% Available in 8 standard sizes Wide ohmic range 10 to 2.0M RoHS compliant Pb-free terminations Glass Resistive Element Nickel Barrier OhmicElectrical Range () Data Resistance Tolerance Ohmic Range () 50 - 5K TCR (ppm/C) TCR (ppm/C) Resistance Tolerance 0.5%, 1% 50 - 5K 50 - 30201 3K 0.5%, 1% 500.01%, - 2K 0402 50 - 12K 50 - 8K 0.1%, 0.25%, 0.5%, 1% 0.5% 0.01%, 0.05%, 0.1%, 0.25%, 25, 5 50 25 0.01%, - 100K 0603 25 - 100K 0.01%, 0.05%, 0.25%, 0.5% 0.05%, 0.1%,0.1%, 0.25%, 0.5% 4.7 - 150K 0.05% 4.7 - 800K 0.1%, 0.25%, 0.5%, 1% 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 4.7 - 150K 50 - 16K 4.7 - 800K 25 - 200K 2 - 4.6 0805 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.1%, 0.25%, 0.5%, 1% 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.25%, 0.5%, 0.01% 5% 4.7 - 500K 50 - 16K 4.70.01%, - 2M 25 - 200K 0.25%, 0.5%, 1% 50 - 30K 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.05%0.1%, 0.25%, 0.5% 0.01%,0.05%, 25 - 500K 1206 4.7 - 2M 4.7 - 1M 1M - 2M 50 - 30K 1000.01%, - 330K 1210 25 - 500K 50 - 30K 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.05%, 0.1%, 0.25%, 0.5%, 1% 25 - 500K 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 2010 1 - 4.6 4.7 - 1M 1 - 4.6 1M - 2M 1M - 2M 225, 5, 5050 25, 5050 25, 50 100 100 200 100 100 125 150 300 250 200 400 200 25, 50 5, 15 0 25 10, 15, 25, 50 5 25, 10, 15, 25,50 50 25, 5050 25, 25, 50 25, 50 125 250 150 150 300 300 25, 50 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 10, 15, 25, 50 0.05%, 0.1%, 0.25%, 0.5%, 1% 25, 50 55, 10 25 0.05%, 0.1%, 0.25%, 0.25%, 0.5%, 1% 0.5% 250 500 150 200 400 300 5 25, 50 10, 15, 25, 50 (c) IRC Advanced Film Division s 3OUTH 3TAPLES 3TREET s #Orpus Christi TeXAS 53! All information is subject to TT own www.irctt.com data and is considered accurate at time of going to print. Telephone: s Facsimile: electronics' s Website: TT electronics plc 1M -(c)2M 100 25, 50 25 - 500K 1 - 4.6 50 25 25, 50 0.25%, 0.5%, 1% 4.7 -TT1M 0.05%, 0.1%, 0.25%, 0.5%, 1% electronics reserves the right to make changes in product specification without notice or liability. 100 5 0.25%, 0.5%, 1% 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 50 62.5 225, 5, 50 50 10, 15, 0.25%, 0.5%, 1% IRC reserves the right to make changes in product specification without notice or liability. General Note All information is subject to IRC's own data and is considered accurate at time of going to print. 50 25, 50 51R0 - 22512 .0M 25 - 500K General Note 62.525 10, 15, 25, 50 0.10.05%, %, 0.5 % 0.25%, 0.5% 0.01%, 0.1%, 4.7 - 1M 30 25, 50 5 50 - 50K 1 - 4.60.01%, 1M - 2M 15 5 25, 50 100 - 330K 50 - 30K 30 10, 15, 25, 50 0.05%, 0.5%, 0.1%, 0.25%, 0.25%, 1% 0.5%, 1% 0.1%, 0.5% 62.5 250 5, 50 25, 0.1%0.25%, , 0.5% 0.05%, 0.1%, 0.5% 0.1%, 0.5% 15 25, 50 0.25%, 0.25%, 0.5%,0.5%, 1%1% 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 4.7 - 1M 25, 50 10, 15, 25, 50 0.25%, 0.5%, 1% 51R0 - 2.0M 50 Voltage (volts) Max Overlo Voltag (volts 10, 15, 25, 5 50 0.1%, 0.25%,1% 0.5%, 1% 0.1%,0.05%, 0.25%, 0.5%, 1 - 4.6 1 - 4.6 25, 50 0.1%, 0.25%, 0.5%, 1% 0.05%, 0.1%, 0.25%, 0.5% 1 - 4.6 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 4.7 - 500K 10, 15, 25, 5062.5 00.25%, .05% 0.5%, 1% 2 - 4.6 50 Voltage (volts) Max Working Voltage Max Overload (volts) 5 5 10, 15, 25, 50 50 - 8K 70C (mW) 50 50 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.01%, 0.05%, 0.1%, 0.25%, 0.5% 0.1%, 0.25%, 0.5%, 1% Rated Power at Rated 70C Max Power at (mW) Working 25 0.01%, 0.05%, 0.25%, 0.5% 0.05%, 0.1%,0.1%, 0.25%, 0.5% 50 - 12K 10 - 200K 10 - 200K 25 0.5%, 1% 0.5%, 1% 50 - 33K 50 - 2K Resistive Element Nickel Barrier trical Data Size Glass Matte tin Plating 25, 50 0.25%, 0.5%, 1% www.bitechnologies.com 25, 50 0.25%, 0.5%, 1% 25, 50 250 150 A subsidiary of TT electronics plc 0#& 3Eries Issue JULY 3HEET OF www.irctt.com www.welwyn-tt.com 09. 11 300 Precision Thin Film Nichrome Chip PCF Series Resistor Precision Thin Film Nichrome Chip Resistor Environmental Data Test Conditions Test Method Short-time Overload Performance Tolerance d0.05% Tolerance !0.05% JIS-C-5202-5.5 5 Seconds at 2.5 X Rated Voltage (not to exceed 2 X Max Voltage) 0.05% (+0.05:) 0.5% (+0.05:) Thermal Shock MIL-STD-202 Method 107 100 Cycles -55C to 150C 0.05% (+0.05:) 0.25% (+0.05:) Humidity (Steady State) MIL-STD-202 Method 103 1000 Hours 40C 90-95% RH 1.5 Hours On / 0.5 Hours Off Rated Voltage 0.05% (+0.05:) 0.3% (+0.05:) 0.05% (+0.05:) 0.2% (+0.05:) 0.5% (+0.05:) 0.5% (+0.05:) R d7.0K: Load Life R !7.0K: MIL-STD-202 Method 108 1000 Hours 70C 1.5 Hours On / 0.5 Hours Off Rated Voltage, Rated Power High Temperature Exposure JIS-C-5202-7.2 96 Hours 155C 0.05% (+0.05:) 0.2% (+0.05:) Low Temperature Operation JIS-C-5202-7.2 96 Hours 155C 0.05% (+0.05:) 0.2% (+0.05:) Resistance to Solder Heat MIL-STD-202 Method 210 10 1 Seconds 260C 0.05% (+0.05:) 0.2% (+0.05:) Solderability MIL-STD-202 Method 208 3 0.5 Seconds 235C Power Derating Curve Packaging Data % Of Rated Power 100 50 0 25 70 95% Min Coverage 155 Chip Size Tape Type Reel Quantity 0201 Paper 5,000 0402 Paper 10,000 0603 Paper 5,000 0805 Paper 5,000 1206 Paper 5,000 1210 Paper or Plastic 5,000 2010 Plastic 4,000 2512 Plastic 4,000 Ambient Temperature (C) (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com PCF Series Issue July 2009 Sheet 2 of 3 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 09. 11 Precision Thin Film Nichrome Chip PCF SeriesResistor Precision Thin Film Nichrome Chip Resistor Physical Data L a TOP SIDE BO TTOM W H b Dimensions (inches) Model L W H a b PCF0201LF 0.0240.002 0.0120.002 0.0090.002 0.0050.002 0.0050.002 PCF0402LF 0.0390.002 0.0200.002 0.0120.002 0.0080.004 0.0080.004 PCF0603LF 0.0610.004 0.0310.004 0.0180.004 0.0120.008 0.0120.008 PCF0805LF 0.0790.007 0.0490.007 0.0210.004 0.0120.008 0.0160.010 PCF1206LF 0.1200.007 0.0610.007 0.0210.004 0.0160.008 0.0140.010 PCF1210LF 0.1260.008 0.1020.008 0.0180.002 0.0200.008 0.0180.008 PCF2010LF 0.1930.007 0.0940.007 0.0210.004 0.0230.005 0.0200.010 PCF2512LF 0.2480.007 0.1220.007 0.0210.004 0.0230.005 0.0200.010 Ordering Data Prefix PCF - W1206LF - 03 - 1001 - B - P - LT Model W0201LF, W0402LF, W0603LF, W0805LF, W1206LF, W1210LF, W2010LF, W2512LF Note: LF = 100% matte tin, Pb-free terminations TCR Characteristic 01=100ppm/C, 02=50ppm/C, 03=25ppm/C, 12=10ppm/C 13=5ppm/C Resistance Code Standard 4-digit resistance code. Examples: 1004=1.0M:, 1003=100K:, 51R0=51: Tolerance Code F= 1%, D=0.5%, C=0.25%, B=0.1%, A=0.05%, T=0.01% Tape Type P=Paper, E=Plastic Tape & Reel Packaging For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com PCF Series Issue July 2009 Sheet 3 of 3 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 09. 11