T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-130WCP/2EGW High Efficiency Red Green Features Description z Bi-level right angle housing LED. The High Efficiency Red source color devices are made with z Pre-trimmed leads for pc board mounting. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Black case enhances contrast ratio. Light Emitting Diode. z High reliability. The Green source color devices are made with Gallium z Housing UL rating:94V-0. Phosphide Green Light Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 12 30 *10 *24 12 30 *12 *30 Viewing Angle [1] 21/2 High Efficiency Red (GaAsP/GaP) L-130WCP/2EGW White Diffused Green (GaP) 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 617 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage V 5 Operating / Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158 L-130WCP/2EGW High Efficiency Red SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158 Green SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158 PACKING & LABEL SPECIFICATIONS L-130WCP/2EGW SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAB1131 REV NO: V.15A DATE: APR/06/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102000158