57
5
JST
1
The XH connector was developed based
on the high reliability and versatility of our
NH series connectors. The connector is
very small with a mounting height of
9.8mm (.386"). Yet it meets the needs for
high-density mounting and miniaturization
of electronic equipment, including VCRs,
radio-cassette players, and car stereo
systems.
Features––––––––––––––––––––––––
• Original folded beam contact
The protected, folded beam contact in this connector provides
high contact pressure with an over-stress stop feature. This
ensures dependable continuity when used with low voltage,
low current carrying circuits (dry circuits). The wire crimp
section is mechanically decoupled from the post insertion
section which, in turn, prevents the mating area from being
adversely affected by crimping.
• Box-shaped shrouded header
The four-sided, box-shaped shroud prevents the receptacle
from being misinserted or pried during insertion and removal.
The shroud also prevents foreign matter from reaching the
posts and resists contact deformation due to handling and
shipping. Furthermore, a serrated, oversized square post is
pressure-fit into each square hole to completely protect the
post against heat and to prevent flux from entering during dip
soldering.
• Header with a boss
This header has a boss (projection) on the bottom of the
housing to prevent improper insertion in printed circuit boards.
• Whisker prevention
The contact is treated with a reflow process and the square
post is copper-undercoated and tin/lead-plated to prevent
whiskers from being generated.
• Interchangeability
This header is interchangeable with those of 2.5mm (.098")
pitch insulation displacement NR, NRD and BR connectors
and board-to-board JQ connectors.
• Conforming to the HA terminal
The 4-circuit XH connector conforms to the HA terminal
specified in JEM 1427 (Japanese Electric Machine Industry
Association Standards).
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm(.063")
* Contact JST for details.
Standards–––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75085
XH CONNECTOR
Disconnectable Crimp style connectors
2.5mm
(.098") pitch
Crimp
Radial TapeEmboss Tape
585858
XH CONNECTOR
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.95
(.077)
6.5(.256)
2.0
(.079)
2.4(.094)
Model No. Applicable Wire
mm2AWG#
Q
'
ty / reel
Insulation O.D mm(in.)
Material and Finish
SXH-001T-P0.6
SXH-002T-P0.6
0.08 to 0.33
0.05 to 0.13
28 to 22
30 to 26
1.2 to 1.9(.047 to .075)
0.9 to 1.3(.035 to .051)
8,000
Phosphor bronze, tin-plated
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
7.7(.303)
A
B
C
2.5
(.098)
4.1
(.161)
5.7
(.224)
Circuit No.1 mark
Circuits Model No. Dimensions mm(in.)
ABC
Q
'
ty / bag
Material
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
XHP- 1
XHP- 2
XHP- 3
XHP- 4
XHP- 5
XHP- 6
XHP- 7
XHP- 8
XHP- 9
XHP-10
XHP-11
XHP-12
XHP-13
XHP-14
XHP-15
XHP-16
XHP-20
—
2.5(.098)
5.0(.197)
7.5(.295)
10.0(.394)
12.5(.492)
15.0(.591)
17.5(.689)
20.0(.787)
22.5(.886)
25.0(.984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
37.5(1.476)
47.5(1.870)
3.2( .126)
5.7( .224)
8.2( .323)
10.7( .421)
13.2( .520)
15.7( .618)
18.2( .717)
20.7( .815)
23.2( .913)
25.7(1.012)
28.2(1.110)
30.7(1.209)
33.2(1.307)
35.7(1.406)
38.2(1.504)
40.7(1.602)
50.7(1.996)
4.8( .189)
7.3( .287)
9.8( .386)
12.3( .484)
14.8( .583)
17.3( .681)
19.8( .780)
22.3( .878)
24.8( .976)
27.3(1.075)
29.8(1.173)
32.3(1.272)
34.8(1.370)
37.3(1.469)
39.8 (1.567)
42.3(1.665)
52.3(2.059)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
Nylon 6, UL94V-0, natural (white)
Note:
1. Contact JST if you require gold-plated contacts or contacts made of brass.
2. Also Contact JST also if you require shielded wires, thin wires or other
special wires.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. XHP-1-oo-
(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green D…orange N…brown FY…vivid yellow
59
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
JST
A
B 5.75(.226)
7.0(.276)
0.64(.025)
3.4
(.134)
2.45
(.096) (.093)
2.35
(.093)
0.64
JST
8
A
B5.75(.226)
7.0(.276)
3.4
(.134)
2.45
(.096) (.025)
0.64 2.45
(.096)
2.5
(.098) (.093)
2.35
JST
8
6.1(.240)
7.0(.276)
A
B
2.45
(.096) (.025)
0.64 2.45
(.096)
2.5
(.098) 3.4
(.134)
11.5(.453)
S( )B-XH-A-1: 7.6(.299)
S( )B-XH-A:9. 2(.362)
Material and Finish
Dimensions mm(in.)
AB
Top entry type Side entry type
Q'ty / box
Circuits Model No.
Top entry type Side entry type
B 2B-XH-A
B 3B-XH-A
B 4B-XH-A
B 5B-XH-A
B 6B-XH-A
B 7B-XH-A
B 8B-XH-A
B 9B-XH-A
B10B-XH-A
B11B-XH-A
B12B-XH-A
B13B-XH-A
B14B-XH-A
B15B-XH-A
B16B-XH-A
B20B-XH-A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
25.0( .984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
37.5(1.476)
47.5(1.870)
7.4( .291)
9.9( .390)
12.4( .488)
14.9( .587)
17.4( .685)
19.9( .783)
22.4( .882)
24.9( .980)
27.4(1.079)
29.9(1.177)
32.4(1.276)
34.9(1.374)
37.4(1.472)
39.9(1.571)
42.4(1.669)
52.4(2.063)
1,000
1,000
500
500
500
500
500
500
250
250
250
250
250
250
200
100
1,000
1,000
500
500
500
250
250
250
250
250
200
200
200
100
100
–
–
S 3B-XH-A-1
S 4B-XH-A-1
S 5B-XH-A-1
S 6B-XH-A-1
S 7B-XH-A-1
S 8B-XH-A-1
S 9B-XH-A-1
S10B-XH-A-1
S11B-XH-A-1
S12B-XH-A-1
S13B-XH-A-1
S14B-XH-A-1
S15B-XH-A-1
–
–
Post: Brass copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
S 2B-XH-A
S 3B-XH-A
S 4B-XH-A
S 5B-XH-A
S 6B-XH-A
S 7B-XH-A
S 8B-XH-A
S 9B-XH-A
S10B-XH-A
S11B-XH-A
S12B-XH-A
S13B-XH-A
S14B-XH-A
S15B-XH-A
S16B-XH-A
–
The shrouded headers are interchangeable with those of the NR , NRD and BR insulation displacement connectors, and JQ board-to-board connectors .
Top entry type Side entry type
(2 circuits)
(3 to 20 circuits)
XH CONNECTOR
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. S3B-XH-A(-1)-oo-
(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green D…orange N…brown FY…vivid yellow
606060
XH CONNECTOR
Through-hole type shrounded header ––––––––––––––––––––––––––––––––––––––––
B
A
2.45
(.096)
7.0
(.276)
3.4
(.134)
0.64(.025)
5.75(.226)
6.75(.266)
0.64(.025)
2.5
(.098)
2.45
(.096)
A
B
0.64(.252)
7.0
(.276)
3.4
(.134)
5.75
(.226)
6.75(.266)
[(0.96)(.038)]
H JST
6
2.5
(.098)
2.45
(.096)
A
B
0.64(.025)
7.0
(.276)
3.4
(.134)
5.75
(.226)
[0.96(.038) ]
H JST
12
Circuits Model No. Dimensions mm(in.)
Q
'
ty / box
AB
2
3
4
5
6
7
8
9
10
11
12
13
14
15
B 2B-XH-2
B 3B-XH-2
B 4B-XH-2
B 5B-XH-2
B 6B-XH-2
B 7B-XH-2
B 8B-XH-2
B 9B-XH-2
B10B-XH-2
B11B-XH-2
B12B-XH-2
B13B-XH-2
B14B-XH-2
B15B-XH-2
2.5( .098)
5.0( .196)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .888)
25.0( .984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
7.4( .291)
9.9( .390)
12.4( .488)
14.9( .587)
17.4( .685)
19.9( .783)
22.4( .882)
24.9( .980)
27.4(1.079)
29.9(1.177)
32.4(1.276)
34.9(1.374)
37.4(1.472)
39.9(1.571)
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
250
Material and Finish
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Glass-filled nylon 66, UL94V-0, natural (ivory)
(9 to 15 circuits)
• Top entry type of glass-filled nylon
(2 circuits)
(3 to 8 circuits)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-XH-2-oo-
(blank)…natural (ivory)
C…black R…red E…blue Y…yellow M…green
61
XH CONNECTOR
JST
A
B
7.0(.276)
0.64(.025)
3.4
(.134)
2.45
(.096)
1.5(.059)
1.6
(.063) 5.75(.226)
(.093)
2.35
(.025)
0.64 1.0
(.039)dia.
(.079)
2.0
JST
7.0(.276)
5.75(.226)
1.5(.059)
A
B
(.025)
0.64 (.063)
2.5
(.098)
2.45
(.096)
1.6
(.134)
3.4
[1.1(.043)]
(.079)
2.0
1.0
(.039)dia.
H JST
0.64(.025)
7.0(.276)
4.9(.193) 5.75(.226)
1.5(.059)
0.64
(.025)
2.7(.106)
3.4
(.134)
2.35
(.093) 4.35
(.171)
Circuits Model No. Dimensions mm(in.)
AB
Q'ty /
box
Material and Finish
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
27.5(1.083)
B 1B-XH-AM
B 2B-XH-AM
B 3B-XH-AM
B 4B-XH-AM
B 5B-XH-AM
B 6B-XH-AM
B 7B-XH-AM
B 8B-XH-AM
B 9B-XH-AM
B10B-XH-AM
B12B-XH-AM
7.4( .291)
9.9( .390)
12.4( .488)
14.9( .587)
17.4( .685)
19.9( .783)
22.4( .882)
24.9( .980)
27.4(1.079)
32.4(1.276)
1,000
1,000
1,000
500
500
500
500
250
250
250
250
1
2
3
4
5
6
7
8
9
10
12
Post: Brass copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
Note: B1B-XH-AM is not UL/CSA/T
U
' '
V approved.
——
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
Top entry type with a boss
(2 circuits)
(1 circuit)
(3 to 12 circuits)
The shrouded headers are interchangeable with those of the NR , NRD and BR insulation displacement connectors, and JQ board-to-board connectors .
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B1B-XH-AM-oo-
(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green
62
XH CONNECTOR
2 and 3 circuits:12.7(.500)
4 to 8 circuits:25.4(1.000)
2 circuits:2.5(.098)/3 to 8circuits:5.0(.197)
12.7(.500)
20.0(.787)
9.0(.354)
6.0(.236)
18.0(.709)
4.0(.157)dia.
6.75(.266)
2 circuits:5.1(.201)
3 to 8circuits:3.85(.152)
Note: Conforms to JIS C 0805.
Taping specification of through-hole type shrouded header––––––––––––––––––––––
Through-hole type shrouded header on radial-tape –––––––––––––––––––––––––––––
7.4(.291)
0.64
(.025)
2.45
(.096) 6.75(.266)
[0.7(.028)dia.]
2.5
(.098)
7.0(.276)
2.5
(.098)
B
A
2.45
(.096)
7.0(.276)2.8
(.110)
0.64
(.025)
6.75(.266)
[0.7(.028)dia.]
B
A
2.45
(.096) 2.5
(.098)
0.64
(.025)
2.8
(.110) 7.0(.276)
[0.7(.028)dia.]
6.75(.266)
Circuits Model No.
2
3
4
5
6
7
8
–
B3B-XH-TV4
B4B-XH-TV4
–
–
–
–
–
5.0(.197)
7.5(.295)
10.0(.394)
12.5(.492)
15.0(.591)
17.5(.689)
–
9.9(.390)
12.4(.488)
14.9(.587)
17.4(.685)
19.9(.783)
22.4(.882)
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: TV4 type/ Nylon 66, UL94V-0
2-TV4 type/ Glass-filled nylon 66, UL94V-0
BA Dimensions mm(in.)
AB
B2B-XH-2-TV4
B3B-XH-2-TV4
B4B-XH-2-TV4
B5B-XH-2-TV4
B6B-XH-2-TV4
B7B-XH-2-TV4
B8B-XH-2-TV4
Q'ty / box
1,000
1,000
500
500
500
500
500
TV4 type 2-TV4 type 2-TV4 type
(3 to 4 circuits) (3 to 8 circuits)(2 circuits)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-XH-2-TV4-oo-
(blank)…natural (ivory)
C…black (glass-filled) BK…black R…red E…blue Y…yellow
M…green
63
XH CONNECTOR
Through-hole type PC board layout (viewed from soldering side) and Assembly layout –––
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If printed circuit boards made of hard material such as FR-4 are used, the hole
dimensions should be larger. The dimensions above should serve as a guideline.
Contact JST for details.
Top entry type Side entry type
Top entry type with a boss
Lead tapeTail tape
TERMINALS & CONNECTORS
R
D
H
W
Flat pack (zig zag folded)
24 indexing holes perfold (304.8mm/12")
(316x45x330mm)12.4"(W)x1.8"(D)x13.0"(H)
19.05mm(.750")
Package type
Distance between folds
Box size
Distance between the end of the
tape and the first connector's
center line (either end)
Distance between the end of the tape and
the first connector's center line (either end)
Products of different packaging specifications are also available.
Contact JST for details.
Packaging specifications of through-hole type shrouded header––––––––––––––––––
64
XH CONNECTOR
6.0(.236)
5.5(.217)
2.5(.098)
B
A
3.75(.148)
0.64
(.025)
7.0(.276) [3.6(.142)]
Circuits Model No. Dimensions mm(in.)
AB
Q'ty /
reel
Material and Finish
5.0(.197)
7.5(.295)
12.5(.492)
S3B-XH-SM3-TB
S4B-XH-SM3-TB
S6B-XH-SM3-TB
12.5(.492)
15.0(.591)
20.0(.787)
500
500
500
3
4
6
Pin: Copper alloy, Copper-undercoated, tin/lead plated
Wafer: Glass-filled nylon 46, UL94V-0, natural (white)
Solder tab: Brass, Copper-undercoated, tin/lead plated
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
Note: The products listed above are supplied on embossed-tape.
Taping specifications of SMT type shrouded headers –––––––––––––––––––––––––––
(3 to 4 circuits) (6 circuits)
Circuits Taping dimensions mm(in.)
FSW
Reel dimen-
sions mm(in.)
W1 Q'ty /
reel
3 to 4
6
11.5(.453)
14.2(.559)
[10.75( .423)]
28.4 (1.118)
24.0( .945)
32.0(1.260)
25.5(1.004)
33.5(1.319)
500
500
Note:
1. Specifications conform to JIS C 0806. The tape width, connector recess
dimensions, etc. are determined by the number of circuits and external shape
of the connector to be loaded.
2. Specifications are subject to change without prior notice.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. S3B-XH-SM3-oo-TB-
(blank)…natural (white)
M…green
65
SMT type PC board layout (viewed from component side) ––––––––––––––––––––––––––––
3.7
(.146)
3.9
(.154)
11(.433)
6.5(.256)
1.8(.071)
2.3
(.091)
2.5(.098)
1.3(.051)
End face of wafer
on the mating side
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
XH CONNECTOR
Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SXH-001T-P0.6 APLMK SXH001-06 APLNC SXH001-06 APLMKLS SXH001-06 APLLSNC SXH001-06 APLSC SXH001-06
SXH-002T-P0.6 APLMK SXH002-06 APLNC SXH002-06 APLMKLS SXH002-06 APLLSNC SXH002-06 APLSC SXH002-06
66
XH CONNECTOR High box type
Disconnectable Crimp style connectors
2.5mm
(.098") pitch
Crimp
5
JST
1
Header for 2.5mm(.098") pitch XH
connector for use specifically with resin
coated ("potted") PC boards.
Features––––––––––––––––––––––––
• Header for 2.5mm (.098") pitch XH connector
for use specifically with resin coated ("potted")
PC boards
This header is tall and fully shrouded so as to prevent the resin
used to coat the PC board from coming into contact with the
mating pins.
• Interchangeability
Designed to accept XH mating receptacles.
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm(.063")
* Contact JST for details.
Standards–––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75089
67
2.5
(.098)
2.45
(.096)
A
B
0.64(.025)
14.2(.559)
3.4
(.134)
1.5(.059)
H JST
6
5.75(.226)
1.0(.039)dia.
6.75(.266)
2.0
(.079)
[0.96(.038) ]
1.6
(.063)
H JST
2.45
(.096) 2.5
(.098)
14.2(.559)
3.4(.134)
1.5(.059)
1.0(.039)dia.
1.6
(.063)
5.75(.226)
7.4(.291) 6.75(.266)
2.0
(.079)
[0.9(.035)] 0.64
(.025)
1.95(.077)
2.4(.094)
2.0(.079)
6.5(.256)
7.7(.303)
4.1
(.161)
5.7(.224)
2.5
(.098)
A
B
C
Circuit No.1
Material and Finish
Model No. Applicable wire Q'ty /
reelmm2AWG#
Insulation O.D. mm(in.)
Phosphor bronze, tin-plated
SXH-001T-P0.6
SXH-002T-P0.6 0.08 to 0.33
0.05 to 0.13 28 to 22
30 to 26
1.2 to 1.9(.047 to .075)
0.9 to 1.3(.035 to .051)
8,000
Circuits Model No. Dimensions mm(in.)
Q
'
ty /
bag
ACB
2
3
4
5
6
7
8
9
10
XHP- 2
XHP- 3
XHP- 4
XHP- 5
XHP- 6
XHP- 7
XHP- 8
XHP- 9
XHP-10
2.5(.098)
5.0(.197)
7.5(.295)
10.0(.394)
12.5(.492)
15.0(.591)
17.5(.689)
20.0(.787)
22.5(.886)
5.7( .224)
8.2( .323)
10.7( .421)
13.2( .520)
15.7( .618)
18.2( .717)
20.7( .815)
23.2( .913)
25.7(1.012)
7.3( .287)
9.8( .386)
12.3( .484)
14.8( .583)
17.3( .681)
19.8( .780)
22.3( .878)
24.8( .976)
27.3(1.075)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Nylon 6, UL94V-0, natural (white)
Material
Circuits
Dimensions mm(in.)
AB
Material and Finish
Q'ty / box
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled nylon 66, UL94V-0, natural (ivory)
2
3
4
5
6
7
8
9
10
BH 2B-XH-2
BH 3B-XH-2
BH 4B-XH-2
BH 5B-XH-2
BH 6B-XH-2
BH 7B-XH-2
BH 8B-XH-2
BH 9B-XH-2
BH10B-XH-2
2.5(.098)
5.0(.197)
7.5(.295)
10.0(.394)
12.5(.492)
15.0(.591)
17.5(.689)
20.0(.787)
22.5(.886)
7.4(. 291)
9.9(. 390)
12.4(. 488)
14.9(. 587)
17.4(. 685)
19.9(. 783)
22.4(. 882)
24.9(. 980)
27.4(1.079)
Model No.
700
500
300
300
250
200
150
150
150
Note :
1. Contact JST if you requier gold-plated contacts or contacts made of brass.
2. Also Contact JST also if you require shielded wires, thin wiers or other special
wires.
Contact––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
High box type
XH CONNECTOR
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. XHP-2-oo-
(blank)…natural (white)
BK…black R…red E…blue Y…yellow
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. BH2B-XH-2-oo-
(blank)…natural (ivory)
R…red C…black E…blue Y…yellow
68
High box type
XH CONNECTOR
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002") for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If printed circuit boards made of hard material such as FR-4 are used, the hole
dimensions should be larger. The dimensions above should serve as a guideline.
Contact JST for details.
0.9+0.1
0
2±0.05
(.079±.002)
3.4(.134)min.
1.6±0.05
(.063±.002)
5.75(.226)
2.8(.110)14.2(.559)
6.75
(.266)
2.5±0.05
(.098±.002) .035
( )dia.
+.004
0 1.2+0.1
0
.047+.004
0
( )dia.
PC board layout (viewed from component side) and Assembly layout––––––––––––––––––
Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SXH-001T-P0.6 APLMK SXH001-06 APLNC SXH001-06 APLMKLS SXH001-06 APLLSNC SXH001-06 APLSC SXH001-06
SXH-002T-P0.6 APLMK SXH002-06 APLNC SXH002-06 APLMKLS SXH002-06 APLLSNC SXH002-06 APLSC SXH002-06