MG-52
MGFW40
DC-DC Converters PCB Mount Type
MGF W 40 24 05 -O
Ordering information
1 Series name
2 Dual output
3 Output wattage
4 Input voltage
5 Output voltage
6 Optional
G
: Capacitor between
Input and Output is removed.
R
: with Remote ON/OFF
(
Positive logic control)
R
1 2 3 4 5 6
MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815
MAX OUTPUT WATTAGE[W] 31.2 30 40.8 42 40.8 42
DC OUTPUT VOLTAGE[V]
*1
±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30
CURRENT[A] 1.3 1 1.7 1.4 1.7 1.4
SPECIFICATIONS
MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815
INPUT
VOLTAGE[V]
DC4.5 - 13 (Surge Voltage 15V, 100ms max) DC9 - 36 (Surge Voltage 50V, 100ms max) DC18 - 76 (Surge Voltage 100V, 100ms max)
CURRENT[A]
*2
7.26typ 6.90typ 1.87typ 1.92typ 0.93typ 0.96typ
EFFICIENCY[%]
*2
86typ 87typ 91typ 91typ 91typ 91typ
OUTPUT
VOLTAGE[V] ±12(+24) ±15(+30) ±12(+24) ±15(+30) ±12(+24) ±15(+30)
CURRENT[A] 1.3 1 1.7 1.4 1.7 1.4
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV]
*3
600max 750max 600max 750max 600max 750max
*4
480max 600max 480max 600max 480max 600max
RIPPLE[mVp-p]
*5
-20 to +60C
100max 100max 100max 100max 100max 100max
-40 to -20C
120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*5
-20 to +60C
100max 100max 100max 100max 100max 100max
-40 to -20C
150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
-20 to +60C
150max 180max 150max 180max 150max 180max
-40 to +60C
240max 290max 240max 290max 240max 290max
DRIFT[mV]
*6
50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 30max (Minimum input, Rated load)
OUTPUT VOLTAGE SETTING[V]
*7
11.765 - 12.492 14.602 - 15.505 11.765 - 12.492 14.602 - 15.505 11.765 - 12.492 14.602 - 15.505
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
Work over 115 to 140% of rating (Total of +Vo and -Vo)
REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF)
ISOLATION
INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis
SAFETY AGENCY APPROVALS UL62368-1, C-UL (CSA62368-1), EN62368-1
OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm (WXHXD) / 30g max
COOLING METHOD Convection/Forced air
*1 Single output +24V/+30V with no use of COM
*2
Rated input voltage(DC5V , DC24V, DC48V) Io=100%
*3
Symmetrical loading from 0% to 100%
*4
Symmetrical loading from 20% to 100%
*5 Riple and Ripple Noizu is measured by using test board with ceramic capacitor 22μF and
Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope)
*6
Drift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C
*7 Rated input voltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature
at 25C
*
Parallel operation with other model is not possible.