15-23B/R6G6BHC-A01/2T - Everlight Electronic Co., Ltd.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 1 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Technical Data Sheet

Full Color Chip LEDs

15-23B/R6G6BHC-A01/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Full-color type.

Descriptions

․The 15-23B SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color Lens Color

R6 AlGaInP Brilliant Red

G6 InGaN Brilliant Yellow Green

BH InGaN Blue

Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 2 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Package Outline Dimensions

Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 3 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF

R6:25

G6:25

BH:25

mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol 260 (for 5

seconds) ℃

Electrostatic Discharge ESD

R6:2000

G6:150

BH:150

V

Power Dissipation Pd

R6:60

G6:110

BH:110

mW

Peak Forward Current

(Duty 1/10 @1KHz) IF P

R6:60

G6:100

BH:100

mA

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 4 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity

R6

Iv G6

BH

72

28.5

100

50

180

90

mcd

Viewing Angle 2θ1/2 ----- 120 ----- deg

Peak Wavelength

R6

λp G6

BH

----- 632

575

468 ----- nm

Dominant Wavelength

R6

λd G6

BH

619

568

465 ----- 629

575

480 nm

Spectrum Radiation

Bandwidth

R6

△λ G6

BH

-----

20

25

----- nm

Forward Voltage

R6

VF G6

BH

----- 2.0

2.0

3.5

2.4

3.9

V

IF=20mA

Reverse Current

R6

IR G6

BH

----- ----- 10

10

50

μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±10%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 5 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Typical Electro-Optical Characteristics Curves

R6

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 6 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Typical Electro-Optical Characteristics Curves

G6

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 7 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Typical Electro-Optical Characteristics Curves

BH

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 8 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 9 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Aluminum moistue-proof bag LabelDesiccant

Label

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 10 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 240℃±5℃

5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/R.H85% 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 11 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Lead solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD.

15-23B/R6G6BHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 12 of 12

Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

E

VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com