© Semiconductor Components Industries, LLC, 2011
November, 2011 − Rev. 12
1Publication Order Number:
BC817−16LT1/D
BC817-16L, SBC817-16L,
BC817-25L, SBC817-25L,
BC817-40L, SBC817-40L
General Purpose
Transistors
NPN Silicon
Features
•AEC−Q101 Qualified and PPAP Capable
•S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector − Emitter Voltage VCEO 45 V
Collector − Base Voltage VCBO 50 V
Emitter − Base Voltage VEBO 5.0 V
Collector Current − Continuous IC500 mAdc
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Total Device Dissipation FR−5 Board,
(Note 1) TA = 25°C
Derate above 25°C
PD225
1.8
mW
mW/°C
Thermal Resistance,
Junction−to−Ambient
RqJA 556 °C/W
Total Device Dissipation
Alumina Substrate, (Note 2)
TA = 25°C
Derate above 25°C
PD
300
2.4
mW
mW/°C
Thermal Resistance,
Junction−to−Ambient
RqJA 417 °C/W
Junction and Storage Temperature TJ, Tstg −55 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR−5 = 1.0 x 0.75 x 0.062 in.
2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina.
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
ORDERING INFORMATION
COLLECTOR
3
1
BASE
2
EMITTER
SOT−23
CASE 318
STYLE 6
1
2
3
1
6x M G
G
6x = Device Code
x = A, B, or C
M = Date Code*
G=Pb−Free Package
MARKING DIAGRAM
(Note: Microdot may be in either location)
*Date Code orientation and/or overbar may
vary depending upon manufacturing location.
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Collector−Emitter Breakdown Voltage
(IC = 10 mA)
V(BR)CEO 45 − − V
Collector−Emitter Breakdown Voltage
(VEB = 0, IC = 10 mA)
V(BR)CES 50 − − V
Emitter−Base Breakdown Voltage
(IE = 1.0 mA)
V(BR)EBO 5.0 − − V
Collector Cutoff Current
(VCB = 20 V)
(VCB = 20 V, TA = 150°C)
ICBO
−
−
−
−
100
5.0
nA
mA
ON CHARACTERISTICS
DC Current Gain
(IC = 100 mA, VCE = 1.0 V) BC817−16, SBC817−16
BC817−25, SBC817−25
BC817−40, SBC817−40
(IC = 500 mA, VCE = 1.0 V)
hFE 100
160
250
40
−
−
−
−
250
400
600
−
−
Collector−Emitter Saturation Voltage
(IC = 500 mA, IB = 50 mA)
VCE(sat) − − 0.7 V
Base −Emitter On Voltage
(IC = 500 mA, VCE = 1.0 V)
VBE(on) − − 1.2 V
SMALL−SIGNAL CHARACTERISTICS
Current−Gain − Bandwidth Product
(IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz)
fT100 − − MHz
Output Capacitance
(VCB = 10 V, f = 1.0 MHz)
Cobo −10 −pF
ORDERING INFORMATION
Device Specific Marking Package Shipping†
BC817−16LT1G
6A SOT−23
(Pb−Free)
3000 / Tape & Reel
BC817−16LT3G 10,000 / Tape & Reel
SBC817−16LT3
BC817−25LT1G
6B SOT−23
(Pb−Free)
3000 / Tape & Reel
SBC817−25LT1G
BC817−25LT3G 10,000 / Tape & Reel
SBC817−25LT3G
BC817−40LT1G
6C SOT−23
(Pb−Free)
3000 / Tape & Reel
SBC817−40LT1G
BC817−40LT3G 10,000 / Tape & Reel
SBC817−40LT3G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
3
TYPICAL CHARACTERISTICS − BC817−16L, SBC817−16L
Figure 1. DC Current Gain vs. Collector
Current
Figure 2. Collector Emitter Saturation Voltage
vs. Collector Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
0.10.010.001
0
100
200
300
10.10.010.001
0.01
0.1
1
Figure 3. Base Emitter Saturation Voltage vs.
Collector Current
Figure 4. Base Emitter Voltage vs. Collector
Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.7
0.8
1.0
1.1
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.8
0.9
1.0
1.2
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
VBE(on), BASE−EMITTER VOLTAGE (V)
1
VCE = 1 V
150°C
−55°C
25°C
IC/IB = 10
150°C
−55°C
25°C
0.4
0.9
IC/IB = 10
150°C
−55°C
25°C
0.4
0.7
1.1 VCE = 5 V
150°C
−55°C
25°C
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
4
TYPICAL CHARACTERISTICS − BC817−16L, SBC817−16L
IB, BASE CURRENT (mA)
Figure 5. Saturation Region
100
10
1
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Temperature Coefficients
+1
IC, COLLECTOR CURRENT (mA)
Figure 7. Capacitances
0.1 1
1 10 100 1000
-2
-1
0
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS
)
V, TEMPERATURE COEFFICIENTS (mV/ C)°θ
C, CAPACITANCE (pF)
1.0
0.8
0.6
0.4
0.2
0
0.01 0.1 10 1001
10 100
TJ = 25°C
IC = 10 mA
qVC for VCE(sat)
qVB for VBE
Cob
Cib
100 mA 300 mA 500 mA
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
5
TYPICAL CHARACTERISTICS − BC817−25L, SBC817−25L
Figure 8. DC Current Gain vs. Collector
Current
Figure 9. Collector Emitter Saturation Voltage
vs. Collector Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
0.10.010.001
0
100
200
300
400
500
10.10.010.001
0.01
0.1
1
Figure 10. Base Emitter Saturation Voltage vs.
Collector Current
Figure 11. Base Emitter Voltage vs. Collector
Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.7
0.8
1.0
1.1
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.8
0.9
1.0
1.2
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
VBE(on), BASE−EMITTER VOLTAGE (V)
1
VCE = 1 V
150°C
−55°C
25°C
IC/IB = 10
150°C
−55°C
25°C
0.4
0.9
IC/IB = 10
150°C
−55°C
25°C
0.4
0.7
1.1 VCE = 5 V
150°C
−55°C
25°C
Figure 12. Current Gain Bandwidth Product
vs. Collector Current
IC, COLLECTOR CURRENT (mA)
10001010.1
10
100
fT
, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VCE = 1 V
TA = 25°C
1000
100
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
6
TYPICAL CHARACTERISTICS − BC817−25L, SBC81725L
IB, BASE CURRENT (mA)
Figure 13. Saturation Region
100
10
1
VR, REVERSE VOLTAGE (VOLTS)
Figure 14. Temperature Coefficients
+1
IC, COLLECTOR CURRENT (mA)
Figure 15. Capacitances
0.1 1
1 10 100 1000
-2
-1
0
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS
)
V, TEMPERATURE COEFFICIENTS (mV/ C)°θ
C, CAPACITANCE (pF)
1.0
0.8
0.6
0.4
0.2
0
0.01 0.1 10 1001
10 100
TJ = 25°C
IC = 10 mA
qVC for VCE(sat)
qVB for VBE
Cob
Cib
100 mA 300 mA 500 mA
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
7
TYPICAL CHARACTERISTICS − BC817−40L, SBC817−40L
Figure 16. DC Current Gain vs. Collector
Current
Figure 17. Collector Emitter Saturation Voltage
vs. Collector Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
0.10.010.001
0
100
200
300
400
700
10.10.010.001
0.001
0.1
1
Figure 18. Base Emitter Saturation Voltage vs.
Collector Current
Figure 19. Base Emitter Voltage vs. Collector
Current
IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.7
0.8
1.0
1.1
10.10.010.0010.0001
0.2
0.3
0.5
0.6
0.8
0.9
1.0
1.2
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
VBE(on), BASE−EMITTER VOLTAGE (V)
1
VCE = 1 V
150°C
−55°C
25°C
IC/IB = 10
150°C
−55°C
25°C
0.4
0.9
IC/IB = 10
150°C
−55°C
25°C
0.4
0.7
1.1 VCE = 5 V
150°C
−55°C
25°C
Figure 20. Current Gain Bandwidth Product
vs. Collector Current
IC, COLLECTOR CURRENT (mA)
10001010.1
10
100
fT
, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VCE = 1 V
TA = 25°C
1000
100
500
600
0.01
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
8
TYPICAL CHARACTERISTICS − BC817−40L, SBC817−40L
IB, BASE CURRENT (mA)
Figure 21. Saturation Region
100
10
1
VR, REVERSE VOLTAGE (VOLTS)
Figure 22. Temperature Coefficients
+1
IC, COLLECTOR CURRENT (mA)
Figure 23. Capacitances
0.1 1
1 10 100 1000
-2
-1
0
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS
)
V, TEMPERATURE COEFFICIENTS (mV/ C)°θ
C, CAPACITANCE (pF)
1.0
0.8
0.6
0.4
0.2
0
0.01 0.1 10 1001
10 100
TJ = 25°C
IC = 10 mA
qVC for VCE(sat)
qVB for VBE
Cob
Cib
100 mA 300 mA 500 mA
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
9
TYPICAL CHARACTERISTICS − BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L,
SBC817−40L
Figure 24. Safe Operating Area
1
VCE (Vdc)
10.1
0.1
0.01 10 100
0.01
0.001
IC (A)
Single Pulse Test @ TA = 25°C
Thermal Limit
100 ms
1 s 10 ms
1 ms
BC817−16L, SBC817−16L, BC817−25L, SBC817−25L, BC817−40L, SBC817−40L
http://onsemi.com
10
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AP
D
A1
3
12
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
ǒmm
inchesǓ
SCALE 10:1
0.8
0.031
0.9
0.035
0.95
0.037
0.95
0.037
2.0
0.079
VIEW C
L
0.25
L1
q
e
EE
b
A
SEE VIEW C
DIM
A
MIN NOM MAX MIN
MILLIMETERS
0.89 1.00 1.11 0.035
INCHES
A1 0.01 0.06 0.10 0.001
b0.37 0.44 0.50 0.015
c0.09 0.13 0.18 0.003
D2.80 2.90 3.04 0.110
E1.20 1.30 1.40 0.047
e1.78 1.90 2.04 0.070
L0.10 0.20 0.30 0.004
0.040 0.044
0.002 0.004
0.018 0.020
0.005 0.007
0.114 0.120
0.051 0.055
0.075 0.081
0.008 0.012
NOM MAX
L1
H
2.10 2.40 2.64 0.083 0.094 0.104
HE
0.35 0.54 0.69 0.014 0.021 0.029
c
0−−− 10 0 −−− 10
q°°°°
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
BC817−16LT1/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
