1
Motorola Small–Signal Transistors, FETs and Diodes Device Data
  
PNP Silicon
MAXIMUM RATINGS
Rating Symbol BC559 BC560 Unit
CollectorEmitter Voltage VCEO –30 –45 Vdc
CollectorBase Voltage VCBO –30 –50 Vdc
EmitterBase Voltage VEBO –5.0 Vdc
Collector Current — Continuous IC–100 mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°CPD625
5.0 mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°CPD1.5
12 Watt
mW/°C
Operating and Storage Junction
Temperature Range TJ, Tstg 55 to +150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Ambient R
q
JA 200 °C/W
Thermal Resistance, Junction to Case R
q
JC 83.3 °C/W
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
CollectorEmitter Breakdown Voltage
(IC = –10 mAdc, IB = 0) BC559
BC560
V(BR)CEO –30
–45
Vdc
CollectorBase Breakdown Voltage
(IC = –10 µAdc, IE = 0) BC559
BC560
V(BR)CBO –30
–50
Vdc
EmitterBase Breakdown Voltage
(IE = –10
m
Adc, IC = 0) V(BR)EBO –5.0 Vdc
Collector Cutoff Current
(VCB = –30 Vdc, IE = 0)
(VCB = –30 Vdc, IE = 0, TA = +125°C)
ICBO
–15
–5.0 nAdc
µAdc
Emitter Cutoff Current
(VEB = –4.0 Vdc, IC = 0) IEBO –15 nAdc
Order this document
by BC559/D

SEMICONDUCTOR TECHNICAL DATA
 

CASE 29–04, STYLE 17
TO–92 (TO–226AA)
123
Motorola, Inc. 1996
COLLECTOR
1
2
BASE
3
EMITTER
REV 1
  
2 Motorola Small–Signal Transistors, FETs and Diodes Device Data
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued)
Characteristic Symbol Min Typ Max Unit
ON CHARACTERISTICS
DC Current Gain
(IC = –10 µAdc, VCE = –5.0 Vdc) BC559B
BC559C/560C
(IC = –2.0 mAdc, VCE = –5.0 Vdc) BC559B
BC559C/560C
BC559
hFE 100
100
180
380
120
150
270
290
500
460
800
800
CollectorEmitter Saturation Voltage
(IC = –10 mAdc, IB = –0.5 mAdc)
(IC = –10 mAdc, IB = see note 1)
(IC = –100 mAdc, IB = –5.0 mAdc, see note 2)
VCE(sat)
–0.075
–0.3
–0.25
–0.25
–0.6
Vdc
Base–Emitter Saturation Voltage
(IC = –100 mAdc, IB = –5.0 mAdc) VBE(sat) –1.1 Vdc
Base–Emitter On Voltage
(IC = –10 µAdc, VCE = –5.0 Vdc)
(IC = –100 µAdc, VCE = –5.0 Vdc)
(IC = –2.0 mAdc, VCE = –5.0 Vdc)
VBE(on)
–0.55
–0.52
–0.55
–0.62
–0.7
Vdc
SMALL–SIGNAL CHARACTERISTICS
CurrentGain — Bandwidth Product
(IC = –10 mAdc, VCE = –5.0 Vdc, f = 100 MHz) fT 250 MHz
Collector–Base Capacitance
(VCB = –10 Vdc, IE = 0, f = 1.0 MHz) Ccbo 2.5 pF
Small–Signal Current Gain
(IC = –2.0 mAdc, VCE = –5.0 V, f = 1.0 kHz) BC559B
BC559C/BC560C
hfe 240
450 330
600 500
900
Noise Figure
(IC = –200 µAdc, VCE = –5.0 Vdc, RS = 2.0 k, f = 1.0 kHz)
(IC = –200 µAdc, VCE = –5.0 Vdc, RS = 100 k, f = 1.0 kHz, f = 200 kHz) NF1
NF2
0.5
2.0
10
dB
NOTES:
1. IB is value for which IC = –11 mA at VCE = –1.0 V.
2. Pulse test = 300 µs – Duty cycle = 2%.
  
3
Motorola Small–Signal Transistors, FETs and Diodes Device Data
2.0
1.5
1.0
0.2
0.3
0.4
0.6
0.8
–0.2 IC, COLLECTOR CURRENT (mAdc)
Figure 1. Normalized DC Current Gain
hFE, NORMALIZED DC CURRENT GAIN
VCE = –10 V
TA = 25
°
C
–1.0
–0.9
–0.8
–0.7
–0.6
–0.5
–0.4
–0.3
–0.2
–0.1
0–0.2–0.1 –0.5 –1.0 –2.0 –5.0 –10 –20 –50 –100
IC, COLLECTOR CURRENT (mAdc)
Figure 2. “Saturation” and “On” Voltages
V, VOLTAGE (VOLTS)
TA = 25
°
C
VBE(sat) @ IC/IB = 10
VBE(on) @ VCE = –10 V
VCE(sat) @ IC/IB = 10
400
20
30
40
60
80
100
200
300
–0.5 IC, COLLECTOR CURRENT (mAdc)
Figure 3. Current–Gain — Bandwidth Product
fT, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz)
C, CAPACITANCE (pF)
10
1.0
2.0
3.0
5.0
7.0
–0.4 –0.6 –1.0 –2.0 –4.0 –10 –20 –40
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. Capacitance
TA = 25
°
C
Cib
Cob
rb, BASE SPREADING RESISTANCE (OHMS)
170
160
150
140
130
120 –10–0.1 –0.2 –0.5 –1.0 –2.0 –5.0
IC, COLLECTOR CURRENT (mAdc)
Figure 5. Base Spreading Resistance
VCE = –10 V
f = 1.0 kHz
TA = 25
°
C
–0.5 –1.0 –2.0 –5.0 –10 –20 –50 –100 –200
VCE = –10 V
TA = 25
°
C
–0.7 –1.0 –2.0 –5.0 –10–7.0 –20 –50
  
4 Motorola Small–Signal Transistors, FETs and Diodes Device Data
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
F
B
K
G
HSECTION X–X
C
V
D
N
N
X X
SEATING
PLANE DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.45 5.20
B0.170 0.210 4.32 5.33
C0.125 0.165 3.18 4.19
D0.016 0.022 0.41 0.55
F0.016 0.019 0.41 0.48
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.015 0.020 0.39 0.50
K0.500 ––– 12.70 –––
L0.250 ––– 6.35 –––
N0.080 0.105 2.04 2.66
P––– 0.100 ––– 2.54
R0.115 ––– 2.93 –––
V0.135 ––– 3.43 –––
1
CASE 029–04
(TO–226AA)
ISSUE AD
STYLE 17:
PIN 1. COLLECTOR
2. BASE
3. EMITTER
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “T ypicals” must be validated for each customer application by customers technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .
How to reach us:
USA/EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; TatsumiSPD–JLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 18004412447 6F SeibuButsuryuCenter, 3–142 Tatsumi KotoKu, Tokyo 135, Japan. 03–35218315
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298
BC559/D
