ES07B to ES07D VISHAY Vishay Semiconductors Small Surface Mount Ultrafast Diodes \ Features * * * * * For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 C/ 10 seconds at terminals 17249 Mechanical Data Case: JEDEC -DO219-AB (SMF) Plastic case Polarity: Band denotes cathode end Weight: approx. 0.01 g Packaging codes-options: G1-10 K per 13" reel (8 mm tape), 50 K/box G2-3 K per 7" reel (8 mm tape), 30 K/box Parts Table Part Type differentiation Marking Package ES07B Single Diodes EB SMF ES07D Single Diodes ED SMF Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Part Symbol Value Unit ES07B VRRM 100 V ES07D VRRM 200 V ES07B VRMS 70 V ES07D VRMS 140 V ES07B VDC 100 V ES07D Maximum average forward rectified current VDC 200 V Ttp = 105 C IF(AV) 1.2 A C 1) IF(AV) 0.5 A IFSM 30 A TA = 65 Peak forward surge current 8.3 ms single half TL = 25 C sine-wave 1) Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads ( 40 m thick) Document Number 85737 Rev. 3, 21-Feb-03 www.vishay.com 1 ES07B to ES07D VISHAY Vishay Semiconductors Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Thermal resistance junction to Symbol Value Unit RJA 180 K/W TJ, TSTG - 55 to + 150 C ambient air1) Operating junction and storage temperature range 1) Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads ( 40 m thick) Electrical Characteristics Tamb = 25 C, unless otherwise specified Max Unit Maximum instantaneous forward voltage Parameter 1.0 A3) Test condition Symbol VF Typ. 0.98 V Maximum DC reverse current at rated DC blocking voltage TA = 25C IR 10 A TA = 100C IR 50 A Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A trr 25 ns Typical capacitance 4 V, 1 MHz CJ 3) pF Pulse test, 300 s pulse with 1 % duty cycle www.vishay.com 2 4 Document Number 85737 Rev. 3, 21-Feb-03 ES07B to ES07D VISHAY Vishay Semiconductors Package Dimensions in mm Cathode Band T op View 1.8 0.1 1.0 0.2 2.8 0.1 5 0.05 - 0.30 0.98 0.1 5 Z 0.60 0.25 Detail Z enlarged 0.00 - 0.10 3.7 0.2 17247 Mounting Pad Layout 1.6 1.2 1.2 17248 Document Number 85737 Rev. 3, 21-Feb-03 www.vishay.com 3 ES07B to ES07D VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 4 Document Number 85737 Rev. 3, 21-Feb-03