BNC Connectors Specifications for BNC Connectors BNC style connectors are miniature, light-weight, weatherproof interconnecting devices characterized by their two-stud, quick disconnect bayonet lock coupling arrangement. Their design functions satisfactorily from DC to 11 GHz in static applications, or from DC to 4GHz in applications involving vibration. The connectors typically yield a low VSWR (reflected signal) to 4GHz. Primary applications include radio telecommunications, broadcast equipment, medical equipment, computer, Precision Video, High definition studio broadcast, video switching and test instrumentation where frequent coupling and de-coupling are necessary. Bomar's BNCs are available in an extensive variety of configurations and cable sizes and are impedance matched to either 50 ohm or 75 ohm. MATERIALS Connector Parts Connector Body and Parts Male Contact Pin Commercial Grade Outer Contact Socket Contact ---------Crimp Ferrule Insulators, Standard Versions ---------Rubber Gaskets Plating Material Brass Brass Zinc Alloy/Brass Brass Beryllium Copper Phosphor Copper Annealed Copper Teflon Delrin Silicone Rubber Nickel (Silver Optional) Equivalent Standard ISOCuZn38Pb2 Body Part QQ-B-626 -------------QQ-B-750 QQ-C-530 / MIL-H-7199 CuBe2 QQ-C-576 L-P403 / BS4271 Grade B ASTM-E1418PSI MIL-G-45204 ELECTRICAL Requirement Performance Impedance Test Specification 50W Frequency Range VSWR RF Insertion Loss RF Leakage Test Voltage ( At Sea Level) Working Voltage ( At Sea Level ) Insulation Resistance Contact Resistance 0-4GHz 1.30 Max. 0.2 db Min. at 3 GHz -55 db Min. at 3 GHz 1500V rms 500V rms 5000 Meg ohms Min. 3 Milli ohms Max. 75W 0-1 GHz -----------MIL-C-39012 MIL-C-39012 MIL-C-39012 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-C-39012 MECHANICAL & ENVIRONMENTAL Requirement Performance Durability Shock Vibration Cable Retention (Cable Types) Coupling Nut 500 Insertions & Extractions Min. 50 G 20 G from 80-2000 Hz 60 lbs. Minimum Pull Test 60 lbs. Maximum Teflon: -55 to +199 C Delrin: -40 to +85 C Continuous Test 48 Hours Temperature Range Moisture Resistance Salt Spray Test Specification MIL-C-39012 MIL-STD-202 MIL-STD-202 MIL-C-39012 MIL-C-39012 ----------------------MIL-STD-202 MIL-STD-202 Products are made to conform to the Mil standard but are for commercial applications and are not QPL FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111 Back to Index -Page1-Page2- BNC 3 Piece Crimp BNC three piece crimp connectors feature semi-captive contacts that "click" into place assuring perfect installation. Each crimp pin has a vent hole for optional soldering. Soldering is recommended for all stranded conductors 26 AWG or smaller. Part Number (Male) 310A205A 310A205A18 310A205F 310A205FS 310A205FV 310A205FV2 310A205FV3 310A204G 310A205G20 310A205G23 310A205MV (I.D.) Fig. No. ** .200 In. Fig. 1 .200 In. Fig. 1 .124 In. Fig. 1 .124 In. Fig. 1 .125 In. Fig. 2 .125 In. Fig. 2 .125 In. Fig. 2 .150 In. Fig. 1 .150 In. Fig. 1 .150 In. Fig. 1 6, 21 AWG Center Conductor 6 CATV, 18 AWG Center Conductor 58A/U, 58C/U Stranded, 141, Thin PVC 58/U Solid Conductor 58/U Thin-Net Plenum Mini 59, RGB Cable (23 AWG) Mini 59, RGB Cable (26 AWG) 59, 62, 210 RG59 20 AWG Center Cond. Belden 8241 .125 In. 174, 178, 196, Mini RGB Cable 50 W Fig. 3 RG/U Cable 310B205MV .125 In. Fig. 3 174, 178, 196, Mini RGB Cable 75 W .090 In. Fig. 3 179, 187 310A205N .125 In. Fig. 1 223 310A205P .205 In. Fig. 1 Belden 8281 True 75 Ohms 310B205Q .150 In. Fig. 2 59, 62, Plenum 310A204T .103 In. Fig.1 Mini 59, RGB Cable (26 AWG) 310A208W2 RoHS compliant** crimp shank REQUEST QUOTE REQUEST DRAWING Fig.1 Fig.2 Fig.3 Click Here for Connector Dimensions/Stripping Dimensions BNC Twist-On and 2 Piece Crimp BNC Twist-On connectors are field installable and require no tooling other than a stripping tool for the cable preparation. The center conductor is inserted into Bomar's unique Posi-Con TMcontact, as the connector is twisted onto the cable's outer jacket. BNC 2 Piece crimp connectors make use of a fully captivated pin. Just insert the center conductor into the connector body, slide the ferrule over the braid, and apply a single hex-crimp to the ferrule. These connectors are easy to install and reliable and are recommended only for the lower data transmission speeds. Part Number 310A405A 310A405F 310A405F1 310A405F2 310A405F3 310A405G 310A405T 320A405F Gender Male Male Male Male Male Male Male Female Fig. No. Fig. 8 Fig. 8 Fig. 8 Fig. 8 Fig. 8 Fig. 8 Fig. 8 Fig. 8A RG/U Cable 6, Thick net 58A/U Solid Cond, 141, Thin PVC 58/U Solid Cond. -.172"- .178 " 58/U Thin Plenum - .158" - .162" Thin Plenum .150" 59, 62, 210 PVC 59, 62, 210 Plenum 58 Solid (PVC) http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] Fig.8A Fig.8 1 BNC Connectors 320A405G Female Fig. 8A 59, 62, 210 (PVC) Male Fig. 6 RG58 (PVC) 310X205F Male Fig. 6 RG59, 62 (PVC) 310X205G Female Fig. 7 RG58 (PVC) 320X205F Female Fig. 7 RG59, 62 (PVC) 320X205G RoHS compliant REQUEST QUOTE REQUEST DRAWING s Fig.6 Fig.7 s 2 FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111 Back to Index -Page 2- Page 3 - BNC Connectors BNC Standard Clamp BNC standard clamp style is a simplified version of the original military clamp style. It is required that the contact be soldered to the center conductor of the cable. Part Number 310A105A Male 9 6 310A105D Male 9 11A 310A105F Male 9 58, 58A, 58C, 141 310A105G Male 9 59, 62, 210 310A105M Male 9 174, 188, 316 320A105F* Female N/S 58, 58A, 58C, 141 320A105G* Female N/S 59, 62, 214 Gender Fig. No. RG/U Cable Figure 9 RoHS compliant REQUEST QUOTE REQUEST DRAWING BNC Specialty Broadcast Plugs Click here for complete Broadcast Catalog Broadcast grade BNC connectors are perfectly matched to 75 ohm impedance's. The superior plugs are for studio wiring and other broadcast uses. Solid precision machined brass, not die-cast, hold up under the toughest conditions. Here, we are showing the eight most popular but there are many more versions matched to the popular cable manufacturer's part number. Part Number Gender Belden Cable SBC1505A Male 1505A SBC1694A Male 1694A SBC1695A Male 1695A SBC1855A Male 1855A SBC7731A Male 7731A SBC8218 Male 8218 SBC8241 Male 8241 SBC8281 Male 8281 s s s s s RoHS compliant REQUEST QUOTE REQUEST DRAWING BNC Bulkhead Jacks Versions are available for front mounting, (F/M) rear mounting, (R/M) crimp types, bulkhead mount grounded, or bulkhead mount, isolated. (Color-coded available.) These jacks are held into the panel by a hex-nut and lock washer. All units feature nickel plated, brass bodies, and gold phosphor-bronze contacts Part Number Figure 13 Figure 14 Figure 16 Fig No. Dwg Hole ID 13 .500 321A245F R/M Crimp, RG58 , Thin-net PVC 13 .500 321A245FV R/M Crimp, Thin-Net Plenum 13 .500 321A245G R/M Crimp, RG59, 62, 210 13 .500 321A245M R/M Crimp, RG174, 188, 196, 316 13 .500 321B245M* R/M Crimp, RG174, 188, 196, 316 13 .500 321B245N* R/M Crimp, RG179, 187 N/S .500 326A515 Figure 15 Description R/M Crimp, RG6 321A245A F/M Solder (Grounded) 14 .375 326R515 F/M Solder (Isolated) White Bushing 15 .375 326R515RD F/M Solder (Isolated) Red Bushing 16 .375 326R515GN F/M Solder (Isolated) Green Bushing 16 .375 326R515BL F/M Solder (Isolated) Blue Bushing 16 .375 s s s s RoHS compliant REQUEST QUOTE REQUEST DRAWING FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index 3 - Page 4 - BNC Panel Jacks and Plugs BNC panel plugs and jacks are of machined brass construction for maximum reliability and quality. All contacts are plated with a minimum of five micro-inches of gold. The square panel types mount on .500 inch centers. The bulkhead type mounts into a .380 "D" shaped panel hole. All connector bodies are bright-nickel plated. http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] BNC Connectors Part Number Description Notations Fig. No. 316A524C Male Bulkhead Panel Mount .380" Mtg. Hole 317A507 Male Panel Mount . 500 Mtg. Hole Centers 20 321A205F Female Panel Mount, Crimp Fits RG58/U Cables 21 321A205G Female Panel Mount, Crimp Fits RG59, 62 , 210 21 321A205M Female Panel Mount, Crimp Fits RG174, 178, 196 21 327A507 Female Panel Mount, Solder .500 Mtg. Hole Centers 22 Dwg . 19 --------- Figure 19 Figure 20 Figure 21 Figure 22 RoHS compliant REQUEST QUOTE REQUEST DRAWING BNC PC Board Vertical Jacks BNC vertical mount jacks are available in straight PC mounts and "through-panel" styles. The "through-panel", 364 Series, is made in both isolated and grounded versions and are ideal for applications where multiple insertions will require a connector which can endure the stress of higher torque. 361A514* Nickel / Brass Straight PC Mount 50W Teflon Con. Plating Gold 361A505* Nickel / Brass Straight PC Mount 50 W Delrin Gold 361A534* Nickel / Brass 3 Post PC Mount 50 W Delrin 361A505APF Nickel/Zinc 4 Post W/ Press Fit Center Pin 50W 361A705APF Nickel/Zinc 4 Post W/ Press Fit Center Pin 75W 364S595 White Valox PC Mount, Thru-Panel, 50 W 364S595B Black Valox 364S595M 364S795* "L" Dim Fig. No. Dwg . .717 26 .914 27 ----- Gold .788 27A Delrin Gold .925 27B Delrin Gold .925 27B Delrin Gold 1.36 23 PC Mount, Thru-Panel, 50 W Delrin Gold 1.36 24 Nickel/Zinc PC Mount, Thru-Panel, 50 W Delrin Gold 1.36 25 White Valox PC Mount, Thru-Panel, 75 W Delrin Gold 1.36 23 364S795B* Black Valox PC Mount, Thru-Panel, 75 W Delrin Gold 1.36 24 364S795M* Nickel/Zinc PC Mount, Thru-Panel, 75 W Delrin Gold 1.3 25 Part Number Body Plating or Material RoHS compliant reflow or wave solder Description Insul. Mat. Fig. 23 Fig. 24 Fig. 25 s s RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING s s The press-fit center pin locks the connector into the PC board so it is held firmly for reflow or wave soldering. Fig. 26 Fig. 27B Fig. 27A * Denotes that items are not popular and may require a special minimum quantity requirement. ________________________ 4 FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index - Page 4 - Page 5 - BNC Connectors BNC PC Board Right Angle JacksX These BNC jacks are manufactured to the highest standards to assure stability in maintaining impedance matching at 50 ohm and 75 ohm applications. The 50 ohm versions have been approved by most of the U.S. manufacturers of LAN cards, and the 75 ohm is in wide use in High Definition Video applications which require the use of a True 75 ohm connector. Contacts are phosphor bronze and will remain resilient even after hundreds of insertions. Part Number Fig 28 ig. Fig 29 Fig. 30 Fig. 31 Height F.M.S. 50W .453 Contact Fig. No. Dwg. Plating Gold 38 Nickel /Zinc 4 Post Low Profile, Metal 75W .453 Gold 38 White Valox Standard Profile W/ Posts 50W .610 Gold 28 364A595T White Valox Standard Profile W/ Posts (TPX) 50W .610 Gold 28 364A595NP* White Valox Standard Profile WO Posts 50W .610 Gold 35 364A595NPT* White Valox Standard Profile WO Posts (TPX) 50W .610 Gold 35 364A595B Black Valox Standard Profile W/ Posts 50W .610 Gold 30 364A595BT Black Valox Standard Profile W/ Posts (TPX) 50W .610 Gold 30 364A595BNP* Black Valox Standard Profile WO Posts 50W .610 Gold 35 364A595BNPT* Black Valox Standard Profile WO Posts (TPX) 50W .610 Gold 35 364A595BL White Valox Lo Profile W/ Posts 50W .515 Gold 29 364A595BLT White Valox Lo Profile W/ Posts (TPX) 50W .515 Gold 29 364A595BLNP* White Valox Lo-Profile W/O Posts 50W .515 Gold 34 364A595BLB Black Valox Lo-Profile W/ Posts 50W .515 Gold 31 50W .515 Gold 31 50W .515 Gold 34 364A595BLBNP* Nickel/Zinc Description 364A595 364A595BLBT http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] Imp. 4 Post Low Profile, Metal Body Material 364M0975 364M095 Black Valox Black Valox Lo-Profile W/ Posts (TPX) Lo-Profile W/O Posts BNC Connectors Fig. 32 Fig. 33 Fig. 34 Fig. 35 364M595 Nickel /Zinc Standard Profile W/ Posts 50W .620 Gold 364M595T Nickel /Zinc Standard Profile W/ Posts (TPX) 50W .620 Gold 32 364M595M Nickel /Zinc Super Lo-Profile W/ Clips 50W .340 Gold 35A 32 364M595MT Nickel /Zinc Super Lo-Profile W/ Clips (TPX) 50W .340 Gold 35A 364M595L Nickel / Zinc Lo-Profile W/ Posts 50W .529 Gold 33 364M595LT Nickel / Zinc Lo-Profile W/ Posts (TPX) 50W .529 Gold 33 364A795 White Valox Standard Profile W/ Posts (TPX) 75W .610 Gold 28 364A795T White Valox Standard Profile W/ Posts 75W .610 Gold 28 364A795B Black Valox Standard Profile W/ Posts 75W .610 Gold 30 364A795BT Black Valox Standard Profile W/ Posts (TPX) 75W .610 Gold 30 364A795BL White Valox Lo-Profile W/ Posts 75W .515 Gold 29 364A795BLT White Valox Lo-Profile W/ Posts (TPX) 75W .515 Gold 29 364A795BLB Black Valox Lo-Profile W/ Posts 75W .515 Gold 31 364A795BLBT Black Valox Lo-Profile W/ Posts (TPX) 75W .515 Gold 31 364M795 Metal Standard Profile W/ Posts 75W .620 Gold 32 364M795T Metal Standard Profile W/ Posts (TPX) 75W .620 Gold 32 364M795L Metal Lo-Profile W/ Posts 75W .529 Gold 33 364M795LT Metal Lo-Profile W/ Posts (TPX) 75W .529 Gold 33 364F595BL White Valox 9400pF 500V Decoupled 50W .515 Gold 36 364F595BLB Black Valox 9400 pF 500V Decoupled 50W .515 Gold 37 364H595BL White Valox 9400 pF 1500V Decoupled 50W .515 Gold 36 364H595BLB Fig. 36 (top) Fig. 37 RoHS compliant reflow or wave solder QUOTE REQUEST DRAWING RoHS compliant wave solder only REQUEST Black Valox 9400 pF 1500V Decoupled 50W .515 Gold 37 364NT Zinc/Brass Jam Nut ( 364 Series) N/A ---- ---- 36N 364LW Zinc/ Steel Lock Washer ( 364Series) N/A ---- ---- 37N Brass/Nickel Knurled Nut (364 Series) N/A ---- ---- 38N 364 KNT (TPX) insulator for re-flow solder --------- Board Clips Are Available In Place of Posts. Add Suffix "C" Spear-point clips lock snuggly into the board. Hardware Fig. 36N Fig. 37N Note: Mounting hardware is optional and must be ordered separately. Hardware is not sold without the connectors. Fig. 38N * Denotes that items are not popular and may require a special minimum order quantity. REQUEST QUOTE REQUEST DRAWING _____________________________ FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index 5 - Page 5 - Page 6 - BNC V-Bite (R) PC Edge Mount The V-Bite (R) is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points. The V-Bite (R) design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces available. ( See "F", BNC Twin and TNC sections.) Part Number 361V504ER 361V504ET Description BNC Jack W/ Teflon For Reflow Solder BNC Threaded Jack W/ Teflon For Reflow Solder Imp Contact 50W Brass./Gold Fig. No. 50W Brass./Gold 39 361V504EFT BNC Threaded Jack W/ Teflon Insulator/Flange 50W Brass./Gold 39B 361V509E BNC Jack W/ Polyethylene Insulator 50W Brass/Tin 39A BNC Threaded Jack W/ Polyethylene Insulator 50W Brass/Tin 39 BNC Jack W/ Teflon For Reflow Solder 75W Brass./Gold 39A 75W Brass./Gold 39 BNC Threaded Jack W/ Teflon Insulator/Flange 75W Brass./Gold 39B BNC Jack W/ Polyethylene Insulator 75W Brass/Gold 39A BNC Threaded Jack W/ Polyethylene Insulator 75W Brass./Gold 39 361V509ET 361V704ER 361V704ET 361V704EFT 361V709E 361V709ET BNC Threaded Jack W/ Teflon For Reflow Solder http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] Dwg. 39A --- ----- BNC Connectors 361KNT Knurled Nut (361 Series) NA --- --- 3M61V704 Mini- BNC Jack W/ Teflon for Reflow Solder 75W Brass./Gold 39C RoHS compliant reflow or wave solder DRAWING Low Profile .270 High FMS Anti Rotational RoHS compliant wave solder only REQUEST QUOTE REQUEST VSWR 1.15:1 Patented V-Bite(R) Snaps Into PCB Surface Mount Center Contact Pick & Place Version Available Fig. 39 Fig.39B Fig.39A Fig. 39C s s BNC Reduced Size PCB Right Angle Mount The Super LowTM Profile BNC PC jack reduces the amount of board space needed to mount a PC jack. Board clips hold the unit in place for soldering. The smallest, lowest profile right angle BNC jack available. The Lo-DecoTM features a four post design that offers greater stability after wave soldering. Also featured is a gold plated contact and nickel plated cast zinc body. Smooth, sleek and aesthetically pleasing design is tumbled to remove casting lines. Part Number Description Imp. Contact Fig. No. 364M595M BNC Super Low Profile Jack 50W Phos./Gold 35A 364M595MT BNC Super Low Profile Jack 50W Phos./Gold 35A 364M795M BNC Super Low Profile Jack 75W Phos./Gold 364M795MT BNC Super Low Profile Jack 75W Phos./Gold 364M095 BNC Lo-Deco Jack 50W Phos./Gold 38 364M0975 BNC Lo-Deco Jack 75W Phos./Gold 38 RoHS compliant reflow or wave solder Dwg. 35A 35A . RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING Fig 35A Fig. PC Layout for Super Low Profile 38 *Denotes that items are not popular and may require a special minimum order quantity. ________________________ 6 FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index - Page 6 - Page 7 - BNC Connectors BNC Dual PC Jacks (Threaded) Right Angle or Vertical Stacked: When board space becomes a serious issue and you still need the robust, full size, BNC connectors, a dual stacked right angle or vertical version will do the trick. Assembly insertion time is cut in half as well. The Dual 364 series is available in both Valox isolated and all metal construction. (shown with closed back option FS) Description Dual Right Angle, White Valox 364A2595 Imp. Contact Fig.No. 50W Phos./Gold 38A 38A 50W Phos./Gold Dual Right Angle, White Valox 75W Phos./Gold Dual Right Angle, White Valox (TPX) 75W Phos./Gold 38A 364A2595B Dual Right Angle, Black Valox 50W Phos./Gold 38A 364A2795B Dual Right Angle, Black Valox 75W Phos./Gold 38A 50W 364A2595T Dual Right Angle, White Valox (TPX) 364A2795 364A2795T Fig. 38A Fig. 38B Right Angle Part Number 364M2595 Dual Right Angle, Metal 364M2595T 364M2795T 3M64M2795 Phos./Gold 38B 50W Phos./Gold 38B 75W Phos./Gold Dual Right Angle, Metal (TPX) 75W Phos./Gold 38B 75W Phos-Gold 38C N/A Brass/Nickel 38D Dual Right Angle, Metal Mini-BNC 364KNT 38A Dual Right Angle, Metal Dual Right Angle, Metal (TPX) 364M2795 Knurled Nut for Dual BNC Dwg. 38B Vertical Fig. 40D Fig. 38C Imp. Contact Fig.No. 364S2595 Dual Vertical, White Valox 50W Phos./Gold 40D 364S2795 Part Number Dual Vertical, White Valox Description 75W Phos./Gold 40D 364S2595B Dual Vertical, Black Valox 50W Phos./Gold 364S2795B Dual Vertical, Black Valox 75W Phos./Gold 50W Phos./Gold ------- 364S2595M Dual Vertical, Metal 364S2795M Dual Vertical, Metal 75W Phos./Gold Imp. Contact N/A Steel/Nickel 40D 40D Tool Fig. 38D Fig. 38E Part Number BD36400 Description - Hex Shafted Tool for Knurled Nut RoHS compliant reflow or wave solder http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] 38E RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING Note:Hardware is optional and must be ordered separately Fig.No. BNC Connectors BNC Multi-Port PC Jacks (Non-Threaded) Side By Side: These right angle units are available in dual or quad configurations. These units are not threaded for panel installation using a jam nut. Up one fourth the installation time. Imp. Contact Fig. No. 365A2595 Dual Right Angle, Side By Side White Valox 50W Phos./Gold 38B 365A2795 Description Part Number Dual Right Angle, Side By Side White Valox 75W Phos./Gold 38B 365A2595B Dual Right Angle, Side By Side Black Valox 50W Phos./Gold 38B 365A2795B Dual Right Angle, Side By Side Black Valox 75W Phos./Gold 38B 365A4595 Quad Right Angle, Side By Side White Valox 50W Phos./Gold NS 365A4795 Quad Right Angle, Side By Side White Valox 75W Phos./Gold. NS 365A4595B Quad Right Angle, Side By Side Black Valox 50W Phos./Gold NS 365A4795B Quad Right Angle, Side By Side Black Valox 75W Phos./Gold NS RoHS compliant reflow or wave solder RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING Fig.38B ________________________ 7 FOR TECHNICAL SUPPORT:PHONE 973-347-4040 / FAX 973-347-2111 Back to Index - Page 7 - Page 8 - - Page 9 - BNC Adapters These sturdy within-series BNC adapters are available in all standard designs. Additionally, several unique constructions compliment the product group and allow adaptations for every conceivable application. All connector bodies are plated with bright nickel. Male contacts are brass, female contacts are phosphor bronze. All contacts are plated with 5 micro inches of gold. Part Number Description Fig. No. 330A505 Male/ Male Inline Barrel Splice 35 332A505 Female/Female Inline Splice 36 335A544 Female/Female Inline Bulkhead Mount (Grounded) 37 Female/Female Inline Isolated Bulkhead (Metal Outer Thread) 37 Crimp "T" Adapter for RG58 Cable 41 Crimp "T" Adapter for RG59, 62 Cables 41 Female/Male/Female "T" Adapter (Yes, it runs with NetwareTM ) 38 Female/Female/Female "T" Adapter 39 351A505 Female/Male Right Angle Adapter 40 383U505 The GoalieTM 42 Fig. 39 383U205F The Goalie BruteTM Crimp Version for RG58 Cable 45 335R544 343A205F 343A205G 343A505 345A505 383U205G The Goalie BruteTM Crimp Version for RG59, 62 Cables 45 383K505* The Goalie BruteTM 43 383P505* The Insulated Goalie 44 353U205F* Male/Female/Female Right Angle Double-DownTMCrimp for RG58 49 353U205G* Male/Female/Female Right Angle Double-DownTM Type for RG59 49 353U505* Male/Female/Female Right Angle Double-DownTM 48 393U205F* Male/Female/Female Straight Double-DownTMCrimp for RG58 47 393U205G* Male/Female/Female Straight Double-DownTMCrimp for RG59 47 393U505* Male/Female/Female Straight Double-DownTM 46 Fig. 38 RoHS compliant REQUEST QUOTE REQUEST DRAWING Fig. 40 Fig. 42 Fig.44 Fig. 43 Fig. 35 Fig. 36 Fig. 37 Fig. 48 Fig. 46 Fig. 45 Fig. 47 Fig. 41 Fig. 49 Specialty LAN Adapters Double DownTM adapters are designed to allow parallel cables entering a patch panel, or a BNC LAN terminal port to be guided at a right angle to the input jack. Two versions accomplish this: one is a right angle with side-by-side jacks for areas with little rear clearance, and the other is a straight version for installations where width between panel jacks in limited. Crimp types are for permanent installations. Goalie, and Goalie Brute allow parallel cable 90 entry which require a minimum of rotational cable space. http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM] BNC Connectors *Minimum quantity Requirements May Apply - Contact Sales ________________________ 9 FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index - Page 9 - Page 10 - BNC Connectors BNC Terminators BNC terminators are available in standard 1% tolerance versions and in the economy 5% tolerance styles. The standard types have removable color coded caps for easy identification. The economy type are color coded as well but caps are not removable. Part Number Description Fig. No. 310X054A 50 W with Red Cap 50 310C054 50 W with Grounding Chain 51 75 W with Blue Cap 50 75 W Precision .1% Tolerance 52 93 W with Yellow Cap 50 310X074 HBC310X075 310X094 Fig. 50 HBC310X075 75 W Precision .1% Tolerance EJ175 50 W Economy N/S EJ177 75 W Economy N/S EJ179 93 W Economy N/S Fig. 51 53 RoHS compliant REQUEST QUOTE REQUEST DRAWING Fig. 52 s s s ss FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index 10 - Page 10 - Coax Crimp Tools Professional grade hex-crimp tools for coaxial connectors are available in ratchet and non-ratcheting types, both provide dependable service. Ratchet tools feature replaceable dies. Included is a convenient release mechanism to unlatch the ratchet in the event of an improper crimp. Each too also crimps the contact pin to the conductor. Part Number BD10100 BDHD100 BDHD200 BDHD100 BD11012 BDHD100 Description Hex Crimp Ratchet for "F" Types, RG59, RG6 Hex Crimp Ratchet for Belden 8281 Hex Crimp Ratchet for BNC/TNC RG58,59,62 and MV Hex Crimp Ratchet for Mini-RG59 Hex Crimp Ratchet for "N" Crimp RG11, RG213, RG214 Hex Crimp Ratchet for BNC/TNC RG6, RG59 REQUEST QUOTE - Page 11 - s http://www.bomarinterconnect.com/bncproducts.htm[9/9/2012 2:58:19 PM]