2N3931
VCBO Collector – Base Voltage (IE= 0)
VCEO Collector – Emitter Voltage (IB= 0)
VEBO Emitter – Base Voltage (IB= 0)
ICCollector Current
PDTotal Device Dissipation TA= 25 °C
PDTotal Device Dissipation TC= 25 °C
Tstg Storage Temperature
TJMax Operating Junction Temperature
RθJA Thermal Resistance Junction to Ambient
RθJC Thermal Resistance Junction to Case
-180V
-180V
-6V
-100mA
0.7W
2.5W
–55 to 200°C
200°C
250°C/W
70°C/W
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
PNP SILICON TRANSIST OR
FEATURES
• PNP High Voltage Planar Transistor
• Hermetic TO39 Package
• Full Screening Options Available
MECHANICAL DATA
Dimensions in mm (inches)
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Document Number 5989
Issue 1
TO–39 METAL PACKAGE
PIN 1 – Emitter
Underside View
PIN 2 – Base PIN 3 – Collector
0.89
(0.035)max.
12.70
(0.500)
min. 0.41 (0.016)
0.53 (0.021)
dia.
5.08 (0.200)
typ.
0.71 (0.028)
0.86 (0.034)
2.54
(0.100)
45°
6.10 (0.240)
6.60 (0.260)
8.51 (0.34)
9.40 (0.37)
7.75 (0.305)
8.51 (0.335)
123
0.74 (0.029)
1.14 (0.045)
2N3931
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Document Number 5989
Issue 1
Parameter Test Conditions Min. Typ. Max. Unit
µA
mA
µA
µA
mA
V
—
pF
—
µs
1
1
500
50
1
1
80 0.75
1.5
1.45
2.2
1.45
50
60 200
25
30 250
50
3.5
0.5
1.3
ICES
ICEV
ICEO
IEBO
VCEO(SUS)*
VCE(sat)*
VBE(sat)*
VBE*
hFE*
CCBO
hFE
ton
toff
Collector Cut Off Current
Collector Cut Off Current
Collector Cut Off Current
Emitter Cut Off Current
Collector Emitter Saturation Voltage
Collector Emitter Saturation Voltage
Base Emitter Saturation Voltage
Base Emitter Voltage
DC Current Gain
Collector Base Capacitance
Small Signal Current Gain
Turn On Time
Turn Off Time
VCE = 60V VBE = 0
VCE = 100V VBE = 0
VCE = 60V Tcase = 150°C
VBE = -2V
VCE = 40V IB= 0
VEB = 4V IC= 0
VEB = 5.5V IC= 0
IC= 100mA IB= 0
IC= 2.5A IB= 250mA
IC= 5A IB= 500mA
IC= 2.5A IB= 250mA
IC= 5A IB= 500mA
IC= 2.5A VCE = 5V
IC= 50mA VCE = 5V
IC= 2.5A VCE = 5V
Tc= -55°C
IC= 5A VCE = 5V
IE= 0 VCB = 10V
f = 1MHz
IC= 0.1A VCE = 5V
f = 1KHz
IC= 0.5A VCE = 5v
f = 20MHz
IC= 5A VCC = 30v
IB1 = 0.5A
IC= 5A VCC = 30V
IB1=-IB2 = 0.5A
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
* Pulse test tp= 300µs , δ< 2%
