1. General description
The 74HC573-Q100; 74HCT573-Q100 is a high-speed Si-gate CMOS device and is pin
compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with
JEDEC standard no. 7A.
The 74HC573-Q100; 74HCT573-Q100 has octal D-type transparent latches featuring
separate D-type inputs for each latch and 3-state true outputs for bus-oriented
applications. A latch enable (LE) inpu t and an output ena ble (OE) input are common to all
latches.
When LE is HIGH, data at the Dn inputs enter the latches. In this condition, the latches are
transparent, i.e. a latch output changes state each time its corresponding D input
changes.
When LE is LOW the latches store the information that was present at the D-inputs a
set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents
of the 8 latches are available at the outputs. When OE is HIGH, the outputs go to the
high-impedance OFF-state. Operation of the OE input does not affect the state of the
latches.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Input levels:
For 74HC573-Q100: CMOS level
For 74HCT573-Q100: TTL level
Inputs and outputs on opposite sides of package allowin g ea sy interface with
microprocessors
Useful as input or output port for microprocessors and microcomputers
3-state non-inverting outputs for bus-oriented applications
Common 3-state output enable input
Multiple package options
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Rev. 4 — 26 January 2015 Product data sheet
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 2 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
3. Ordering information
4. Functional diagram
Table 1. Ordering information
Type number Package
Temperature
range Name Description Version
74HC573D-Q100 40 C to +125 C SO20 plastic small outline package; 20 leads;
body width 7.5 mm SOT163-1
74HCT573D-Q100
74HC573DB-Q100 40 C to +125 C SSOP20 plastic shrink small outline package; 20 leads;
body width 5.3 mm SOT339-1
74HCT573DB-Q100
74HC573PW-Q100 40 C to +125 C TSSOP20 plastic thin shrink small outline package; 20 leads;
body width 4.4 mm SOT360-1
74HCT573PW-Q100
74HC573BQ-Q100 40 C to +125 C DHVQFN20 plastic dual in-line compatible thermal enhanced very
thin quad flat package; no leads; 20 terminals;
body 2.5 4.5 0.85 mm
SOT764-1
74HCT573BQ-Q100
Fig 1. Functional di agram
PQD
67$7(
2873876
/$7&+
WR
4
4
4
4
4
4
4
4
'
'
'
'
'
'
'
'
/(
2(
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 3 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Fig 2. Logic diag ram
DDH
4
'
'4
4
'
'4
4
'
'4
4
'
'
/(
4
4
'
'
/$7&+
/$7&+
/$7&+
/$7&+
/$7&+
4
/(
2(
/( /( /( /(
4
'
'4
/$7&+
/(
4
'
'4
/$7&+
/(
4
'
'4
/$7&+
/(
Fig 3. Logic symbol Fig 4. IEC logic symbol
PQD
'
'
'
'
'
'
'
'
/(
2(
4
4
4
4
4
4
4
4
PQD
&
(1
'
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 4 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
5. Pinning information
5.1 Pinning
5.2 Pin description
(1) This is not a supply pin. The substrate is attached to this
pad using conductive die attach material. There is no
electrical or mechanical requirement to solder this pad.
However, if it is soldered, the solder land should remain
floating or be connected to GND.
Fig 5. Pin configuration SO20, SSOP20 and
TSSOP20 Fig 6. Pin configuration DHVQFN20
DDD
2
(
9&&
'
4
'
4
'
4
'
4
'
4
'
4
'
4
'
4
*1' /(
+&4
+&74
DDD
7UDQVSDUHQWWRSYLHZ
4
'
'
4
' 4
' 4
' 4
' 4
' 4
'
*1'
4
*1'
/(
2(
9&&
WHUPLQDO
LQGH[DUHD
+&4
+&74
Table 2. Pin description
Symbol Pin Description
OE 1 3-state output enable input (active LOW)
D[0:7] 2, 3, 4, 5, 6, 7, 8, 9 data input
GND 10 ground (0 V)
LE 11 latch enable input (active HIGH)
Q[0:7] 19, 18, 17, 16, 15, 14, 13, 12 3-state latch output
VCC 20 supply voltage
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 5 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
6. Functional description
[1] H = HIGH voltage level;
h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition;
L = LOW voltage level;
l = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition;
Z = high-impedance OFF-state.
7. Limiting values
[1] For SO20: Ptot derates linearly with 8 mW/K above 70 C.
For SSOP20 and TSSOP20 packages: Ptot derates linearly with 5.5 mW/K above 60 C.
For DHVQFN20 package: Ptot derates linearly with 4.5 mW/K above 60 C.
Table 3. Function table[1]
Operating mode Control Input Internal
latches Output
OE LE Dn Qn
Enable and read register (transparent
mode) LHLLL
HHH
Latch and read register L L l L L
hHH
Latch register and disable outputs H L l L Z
hHZ
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +7 V
IIK input clamping current VI < 0.5 V or VI>V
CC +0.5 V - 20 mA
IOK output clamping current VO<0.5 V or VO>V
CC +0.5V - 20 mA
IOoutput current VO = 0.5 V to (VCC +0.5V) - 35 mA
ICC supply current - +70 mA
IGND ground current - 70 mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation [1] - 500 mW
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 6 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
8. Recommended operating conditions
9. Static characteristics
Table 5. Recommended operating con ditions
Voltages are referenced to GND (ground = 0 V )
Symbol Parameter Conditions 74HC573-Q100 74HCT573-Q100 Unit
Min Typ Max Min Typ Max
VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V
VIinput voltage 0 - VCC 0-V
CC V
VOoutput voltage 0 - VCC 0-V
CC V
Tamb ambient temperature 40 +25 +125 40 +25 +125 C
t/V input transition rise and fall rate VCC = 2.0 V - - 625 - - - ns/V
VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V
VCC = 6.0 V - - 83 - - - ns/V
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
74HC573-Q100
VIH HIGH-level
input voltage VCC = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V
VCC = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V
VCC = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V
VIL LOW-level
input voltage VCC = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V
VCC = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V
VCC = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V
VOH HIGH-level
output voltage VI=V
IH or VIL
IO=20 A; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V
IO=20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V
IO=20 A; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V
IO=6.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V
IO=7.8 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V
VOL LOW-level
output voltage VI=V
IH or VIL
IO=20A; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V
IO=20A; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V
IO=20A; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V
IO= 6.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V
IO= 7.8 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V
IIinput leakage
current VI=V
CC or GND;
VCC =6.0V --0.1 - 1.0 - 1.0 A
IOZ OFF-state
output current VI=V
IH or VIL;
VO=V
CC or GND;
VCC =6.0V
--0.5 - 5.0 - 10.0 A
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 7 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
ICC supply current VI=V
CC or GND; IO=0A;
VCC =6.0V - - 8.0 - 80 - 160 A
CIinput
capacitance -3.5- pF
74HCT573-Q100
VIH HIGH-level
input voltage VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V
VIL LOW-level
input voltage VCC = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V
VOH HIGH-level
output voltage VI=V
IH or VIL; VCC =4.5V
IO=20 A 4.4 4.5 - 4.4 - 4.4 - V
IO=6 mA 3.98 4.32 - 3.84 - 3.7 - V
VOL LOW-level
output voltage VI=V
IH or VIL; VCC =4.5V
IO=20A - 0 0.1 - 0.1 - 0.1 V
IO= 6.0 mA - 0.16 0.26 - 0.33 - 0.4 V
IIinput leakage
current VI=V
CC or GND;
VCC =5.5V --0.1 - 1.0 - 1.0 A
IOZ OFF-state
output current VI=V
IH or VIL; VCC =5.5V;
VO=V
CC or GND per input
pin; other inputs at VCC or
GND; IO=0A
--0.5 - 5.0 - 10 A
ICC supply current VI=V
CC or GND; IO=0A;
VCC =5.5V - - 8.0 - 80 - 160 A
ICC additional
supply current VI=V
CC 2.1 V;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V;
IO=0A
per input pin; Dn inputs - 35 126 - 158 - 172 A
per input pin; LE input - 65 234 - 293 - 319 A
per input pin; OE input - 125 450 - 563 - 613 A
CIinput
capacitance -3.5- - - - -pF
Table 6. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 8 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
10. Dynamic characteristics
Table 7. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 11.
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
74HC573-Q100
tpd propagation
delay Dn to Qn; see Figure 7 [1]
VCC = 2.0 V - 47 150 - 190 - 225 ns
VCC = 4.5 V - 17 30 - 38 - 45 ns
VCC =5V; C
L=15pF - 14 - - - - - ns
VCC = 6.0 V - 14 26 - 33 - 38 ns
tpd propagation
delay LE to Qn; see Figure 8 [1]
VCC = 2.0 V - 50 150 - 190 - 225 ns
VCC = 4.5 V - 18 30 - 38 - 45 ns
VCC =5V; C
L=15pF - 15 - - - - - ns
VCC = 6.0 V - 14 26 - 33 - 38 ns
ten enable time OE to Qn; see Figure 9 [2]
VCC = 2.0 V - 44 140 - 175 - 210 ns
VCC = 4.5 V - 16 28 - 35 - 42 ns
VCC = 6.0 V - 13 24 - 30 - 36 ns
tdis disable time OE to Qn; see Figure 9 [3]
VCC = 2.0 V - 55 150 - 190 - 225 ns
VCC = 4.5 V - 20 30 - 38 - 45 ns
VCC = 6.0 V - 16 26 - 33 - 38 ns
tttransition
time Qn; see Figure 7 [4]
VCC = 2.0 V - 14 60 - 75 - 90 ns
VCC = 4.5 V - 5 12 - 15 - 18 ns
VCC = 6.0 V - 4 10 - 13 - 15 ns
tWpulse width LE HIGH; see Figure 8
VCC = 2.0 V 80 14 - 100 - 120 - ns
VCC = 4.5 V 16 5 - 20 - 24 - ns
VCC = 6.0 V 14 4 - 17 - 20 - ns
tsu set-up time Dn to LE; see Figure 10
VCC = 2.0 V 50 11 - 65 - 75 - ns
VCC = 4.5 V 10 4 - 13 - 15 - ns
VCC = 6.0 V 9 3 - 11 - 13 - ns
thhold time Dn to LE; see Figure 10
VCC = 2.0 V 5 3 - 5 - 5 - ns
VCC = 4.5 V 5 1 - 5 - 5 - ns
VCC = 6.0 V 5 1 - 5 - 5 - ns
CPD power
dissipation
capacitance
CL=50pF;f=1 MHz;
VI=GNDtoV
CC
[5] -26- - - - -pF
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 9 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
[1] tpd is the same as tPLH and tPHL.
[2] ten is the same as tPZH and tPZL.
[3] tdis is the same as tPLZ and tPHZ.
[4] tt is the same as tTHL and tTLH.
[5] CPD is used to determine the dynamic power dissipation (PD in W).
PD=C
PD VCC2fiN+(CLVCC2fo) where:
fi = input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CLVCC2fo) = sum of outputs.
74HCT573-Q100
tpd propagation
delay Dn to Qn; see Figure 7 [1]
VCC = 4.5 V - 20 35 - 44 - 53 ns
VCC =5V; C
L=15pF - 17 - - - - - ns
tpd propagation
delay LE to Qn; see Figure 8 [1]
VCC = 4.5 V - 18 35 - 44 - 53 ns
VCC =5V; C
L=15pF - 15 - - - - - ns
ten enable time OE to Qn; see Figure 9 [2]
VCC = 4.5 V - 17 30 - 38 - 45 ns
tdis disable time OE to Qn; see Figure 9 [3]
VCC = 4.5 V - 18 30 - 38 - 45 ns
tttransition
time Qn; see Figure 7 [4]
VCC = 4.5 V - 5 12 - 15 - 18 ns
tWpulse width LE HIGH; see Figure 8
VCC = 4.5 V 16 5 - 20 - 24 - ns
tsu set-up time Dn to LE; see Figure 10
VCC = 4.5 V 13 7 - 16 - 20 - ns
thhold time Dn to LE; see Figure 10
VCC = 4.5 V 9 4 - 11 - 15 - ns
CPD power
dissipation
capacitance
CL=50pF;f=1 MHz;
VI=GNDtoV
CC 1.5 V [5] -26- - - - -pF
Table 7. Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 11.
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 10 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
11. Waveforms
Measurement points are given in Table 8.
Fig 7. Prop a ga tion delay data input (Dn) to output (Qn) and output transition time
DDH
'QLQSXW
4QRXWSXW
90
W3/+ W3+/
W7+/
W7/+
90
Measurement points are given in Table 8.
Fig 8. Pulse width latch enable input (LE), propagation delay latch en ab le input (LE) to output (Qn) and ou tput
transition time
90
90
W3/+
W3+/
W:
/(LQSXW
4QRXWSXW
DDH
W7/+
W7+/
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 11 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 9. Enable and disable times
DDH
W3/=
W3+=
RXWSXWV
GLVDEOHG
RXWSXWV
HQDEOHG
RXWSXWV
HQDEOHG
RXWSXW
/2:WR2))
2))WR/2:
RXWSXW
+,*+WR2))
2))WR+,*+
2(LQSXW
9,
92/
92+
9&&
90
*1'
*1'
W3=/
W3=+
90
90
Measurement points are given in Table 8.
The shaded areas indicate when the input is permitted to change for predictable output performance.
Fig 10. Set-up and hold times for data input (Dn) to latch input (LE)
DDH
90
/(LQSXW
'QLQSXW 90
WK
WVX
WK
WVX
Table 8. Measur ement points
Type Input Output
VMVM
74HC573-Q100 0.5VCC 0.5VCC
74HCT573-Q100 1.3 V 1.3 V
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 12 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Test data is given in Table 9.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Fig 11. Test circuit for measuring switching times
9
0
9
0
W
:
W
:
9
9
,
9
,
QHJDWLYH
SXOVH
SRVLWLYH
SXOVH
9
9
0
9
0
W
I
W
U
W
U
W
I
DDG
'87
9
&&
9
&&
9,92
57
5/6
&/
RSHQ
*
Table 9. Test data
Type Input Load S1 position
VItr, tfCLRLtPHL, tPLH tPZH, tPHZ tPZL, tPLZ
74HC573-Q100 VCC 6ns 15pF, 50 pF 1kopen GND VCC
74HCT573-Q100 3 V 6 ns 15 pF, 50 pF 1 kopen GND VCC
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 13 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
12. Package outline
Fig 12. Package outline SOT163-1 (SO20)
81,7 $
PD[ $
$
$
E
S F '
(
H +
( / /
S 4 =
\ZY ș
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
PP
LQFKHV
R
R
',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627
Z 0
E
S
GHWDLO;
=
H
'
\
( 06
SLQLQGH[
PP
VFDOH
;
ș
$
$
$
+
(
/
S
4
(
F
/
Y 0 $
$
$
62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 14 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Fig 13. Package outline SOT339-1 (SSOP20)
81,7 $
$
$
E
S F '
(
H +
( / /
S 4
=\ZY ș
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
PP
R
R
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 02
;
Z 0
ș
$
$
$
E
S
'
+
(
/
S
4
GHWDLO;
(
=
H
F
/
Y 0 $
$
$
\
SLQLQGH[
PP
VFDOH
6623SODVWLFVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
$
PD[
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 15 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Fig 14. Package outline SOT360-1 (TSSOP20)
81,7 $
$
$
E
S F ' (
H +
( / /
S 4 =\ZY ș
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
PP
R
R
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 02
Z 0
E
S
'
=
H
SLQLQGH[
ș
$
$
$
/
S
4
GHWDLO;
/
$
+
(
(
F
Y 0 $
;
$
\
PP
VFDOH
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
$
PD[
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 16 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
Fig 15. Package outline SOT764-1 (DHVQFN20)
5HIHUHQFHV
2XWOLQH
YHUVLRQ
(XURSHDQ
SURMHFWLRQ ,VVXHGDWH
,(& -('(& -(,7$
627
02
VRWBSR
8QLW
PP
PD[
QRP
PLQ
$
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
$E
F'
'K( (K
HH
/
YZ
\\
GHWDLO;
% $
H
H
H
&
\
&
\
;
$&%
Y
&
Z
VFDOH
$
$
F
/
(K
'K
E
'
(
WHUPLQDO
LQGH[DUHD
WHUPLQDO
LQGH[DUHD
PP
'+94)1SODVWLFGXDOLQOLQHFRPSDWLEOHWKHUPDOHQKDQFHGYHU\WKLQTXDGIODWSDFNDJHQROHDGV
WHUPLQDOVERG\[[PP 627
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 17 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
13. Abbreviations
14. Revision history
Table 10 . Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
TTL Transistor-Transistor Logic
MIL Military
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC_HCT573_Q10 0 v.4 20150126 Product data sheet - 74HC_HCT573_Q100 v.3
Modifications: •Table 7: Power dissipation capacitance condition for 74HCT573-Q100 is corrected.
74HC_HCT573_Q10 0 v.3 20130305 Product data sheet - 74HC_HCT573_Q100 v.2
Modifications: •74HC573DB-Q100 and 74HCT 573DB-Q100 added.
74HC_HCT573_Q10 0 v.2 20120816 Product data sheet - 74HC_HCT573_Q100 v.1
74HC_HCT573_Q10 0 v.1 20120802 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 18 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device (s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may dif fe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre va il.
Product specificat io n — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use in automotive applications — This Nexperia
product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed ,
authorized or warranted to be suitable for use in life support , life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and t her efo re su ch inclu si on a nd/or use is at the cu stome r's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associate d with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party custo mer(s). Customer is responsible for doing all necessa ry
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by cust omer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
74HC_HCT573_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 4 — 26 January 2015 19 of 20
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
No offer to sell or license — Nothing in this document may be interpret ed or
construed as an of fer to se ll product s that is op en for accept ance or the grant ,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a docume nt is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
16. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia 74HC573-Q100; 74HCT573-Q100
Octal D-type transparent latch; 3-state
17. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
5 Pinning information. . . . . . . . . . . . . . . . . . . . . . 4
5.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Functional description . . . . . . . . . . . . . . . . . . . 5
7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Recommended operating conditions. . . . . . . . 6
9 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
10 Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13
13 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 17
14 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 17
15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 18
15.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18
15.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
16 Contact information. . . . . . . . . . . . . . . . . . . . . 19
17 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
26 January 2015
