1.15.108.051/0000 - RAFI

Pushbuttons 1 - 37

LUMO

75 (40)

LUMOTAST 75 IP40

General data

LUMOTAST 75 IP40 pushbutton range

Illuminated pushbuttons, signal lamps and keylock switches

• Mounting hole diameter 16.2 mm

• Degree of protection IP40

• Solder terminals for the following wire cross-sections:

- Installed 0.5 mm2max.

- Factory terminated 0.35 mm2max.

• 250 V/4 A max.

• 2 NC + 2 NO max. (3 NC + 3 NO on request)

• Lamp socket T 4.5

Content

LUMOTAST 75 illuminated pushbutton IP40 1 - 38

LUMOTAST 75 illuminated pushbutton IP40, protruding lens, round collar 1 - 40

LUMOTAST 75 illuminated pushbutton IP40, flush lens, square collar 1 - 41

LUMOTAST 75 illuminated pushbutton IP40, flush lens, rectangular collar 1 - 42

LUMOTAST 75 illuminated pushbutton IP40, protruding lens, square collar 1 - 43

LUMOTAST 75 keylock switch IP40 1 - 44

LUMOTAST 75 keylock switch IP40, round collar 1 - 45

LUMOTAST 75 keylock switch IP40, rectangular collar 1 - 46

LUMOTAST 75 IP40 signal lamp with lamp socket T 4.5 1 - 48

LUMOTAST 75 IP40 signal lamp with lamp socket T 4.5, round collar, protruding lens 1 - 49

LUMOTAST 75 IP40 signal lamp, square collar, flush lens 1 - 50

LUMOTAST 75 IP40 signal lamp, rectangular collar, flush lens 1 - 50

LUMOTAST 75 IP40 signal lamp, square collar, protruding lens 1 - 51

Stock items are marked

by bold printed order numbers.

1 - 38 Pushbuttons

LUMO

75 (40)

LUMOTAST 75 IP40

LUMOTAST 75 illuminated pushbutton IP40

Mounting holePict.: with colourless lens

Technical data

General information

Form of lens see order block

Form of collar see order block

Colour of collar see order block

Dimensions

Length of collar see order block

Width of collar see order block

Diameter of collar see order block

Overall height 7.5 mm

Mounting depth 41.5/49.5/57.5 mm

Mounting hole 16.2 mm

Mechanical design

Mounting ring nut

Terminals solder terminals

Contact system snap-action bridge contact

Contact function see order block

Contact arrangement see order block

Contact materials Ag

Illuminability yes

Lamp socket T 4.5

Mechanical characteristics

Operating force max. 3 ... 6.5 N

Operating travel 2.7 mm

Switching travel NC 1.6 mm

Switching travel NO 0.9 mm

Robustness min. 100 N

Electrical characteristics

Rated voltage AC max. 250 V

Rated voltage DC max. 220 V

Rated voltage AC/DC min. 12 V

Rated current AC max. 4 A

Rated current DC max. 0.2 A

Rated current AC/DC min. 5 mA

Contact resistance acc.

to life max. 200 mΩ

Protection class II

Other specifications

Operating life, at 250

V/2 A (operations) 200000 (momentary)

Operating life, at 250

V/4 A (operations) 60000 (momentary),

10000 (latching)

Degree of protection

from front side IP40

Ambient temp. operating

min. -25 °C

Ambient temp. operating

without lamp max. +70 °C

Ambient temp. operating

with lamp max. +55 °C

Storage temperature min. -40 °C

Storage temperature max. +80 °C

Resistance to constant

environment according to

IEC 600 68-2-3 and 2-30

Resistance at variable

environment according to

IEC 600 68-2-14 and 2-33

Approvals ENEC 25 T 55 (70), UL,

CSA

Flame class acc. to UL 94 V 1

Hot wire ignition acc.

to IEC 60695-2-1 yes

Description Photo Order no. Page

Accessories LUMOTAST 75 illuminated pushbutton IP40

Filament lamp, T 4.5 base, 12 V 1.90.100.022/0000 5 - 6

Filament lamp, T 4.5 base, 24 V 1.90.100.023/0000 5 - 6

Stock items are marked

by bold printed order numbers.

Pushbuttons 1 - 39

LUMO

75 (40)

LUMOTAST 75 IP40

Description Photo Order no. Page

Accessories LUMOTAST 75 illuminated pushbutton IP40

LED T 4.5 superbright, red, 24 V 1.90.690.331/0000 5 - 18

LED T 4.5 superbright, green, 24 V 1.90.690.332/0000 5 - 18

LED T 4.5 superbright, yellow, 24 V 1.90.690.333/0000 5 - 18

LED T 4.5 superbright, blue, 24 V 1.90.690.334/0000 5 - 18

LED T 4.5 superbright, white, 24 V 1.90.690.335/0000 5 - 18

LED T 4.5, red, 2-3 V 1.90.692.001/0000 5 - 18

LED T 4.5, green, 2-3 V 1.90.692.002/0000 5 - 18

LED T 4.5, yellow, 2-3 V 1.90.692.003/0000 5 - 18

Lamp extractor for T 4.5/5.5, lamp diameter 4 mm 1.90.900.002/0000 5 - 22

Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 22

Protective cap (for 18 x 24 collar) 5.05.800.027/0000 5 - 26

Blanking cap, black, to cover spare holes, dimensions

18 x 18 mm 5.52.006.020/0103 5 - 28

Blanking cap, black, to cover spare holes, dimensions

18 x 24 mm 5.52.006.021/0100 5 - 28

Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 28

Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 23

Stock items are marked

by bold printed order numbers.

1 - 40 Pushbuttons

LUMO

75 (40)

LUMOTAST 75 IP40

LUMOTAST 75 illuminated pushbutton IP40, protruding lens, round collar

Pict.: with colourless lens Mounting hole

Contact arrangement Contact function Colour of collar Order no.

without lens

Note

1 NC + 1 NO momentary black 1.15.108.451/0000 Please include the desired lens and

diffuser in your order.

1 NC + 1 NO latching black 1.15.108.551/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO momentary black 1.15.108.452/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO latching black 1.15.108.552/0000 Please include the desired lens and

diffuser in your order.

Technical data see page 1 - 38

Lenses:

Lens, round, transparent colourless, for filament lamp or LED: 5.49.257.011/1002

Lens, round, transparent red, for LED: 5.49.257.011/1301

Lens, round, transparent red, for filament lamp: 5.49.257.011/1303

Lens, round, transparent yellow, for filament lamp or LED: 5.49.257.011/1402

Lens, round, transparent green, for filament lamp: 5.49.257.011/1502

Lens, round, transparent green, for LED: 5.49.257.011/1503

Lens, round, transparent blue, for filament lamp: 5.49.257.011/1601

Accessories:

Diffuser, round, for filament lamp, without legend: 5.72.050.000/0202

Diffuser, round, for LED, without legend: 5.72.050.000/0214

Stock items are marked

by bold printed order numbers.

Pushbuttons 1 - 41

LUMO

75 (40)

LUMOTAST 75 illuminated pushbutton IP40, flush lens, square collar

Pict.: with red lens, without ring nut Mounting hole

Contact arrangement Contact function Colour of collar Order no.

without lens

Note

1 NC + 1 NO momentary black 1.15.108.251/0000 Please include the desired lens and

diffuser in your order.

1 NC + 1 NO latching black 1.15.108.351/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO momentary black 1.15.108.252/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO latching black 1.15.108.352/0000 Please include the desired lens and

diffuser in your order.

Technical data see page 1 - 38

LUMOTAST 75 IP40

Lenses:

Lens, square, transparent colourless, for filament lamp or LED: 5.49.275.036/1002

Lens, square, transparent red, for LED: 5.49.275.036/1301

Lens, square, transparent red, for filament lamp: 5.49.275.036/1303

Lens, square, transparent yellow, for filament lamp or LED: 5.49.275.036/1402

Lens, square, transparent green, for filament lamp: 5.49.275.036/1502

Lens, square, transparent green, for LED: 5.49.275.036/1503

Lens, square, transparent blue, for filament lamp: 5.49.275.036/1601

Accessories:

Sealing cap IP65 (for 18 x 18 collar): 5.05.200.009/0000

Protective cap (for 18 x 18 collar): 5.05.800.030/0000

Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202

Diffuser, square, for LED, without legend: 5.73.013.000/0214

Stock items are marked

by bold printed order numbers.

1 - 42 Pushbuttons

LUMO

75 (40)

Lenses:

LUMOTAST 75 illuminated pushbutton IP40, flush lens, rectangular collar

Pict.: with green lens

Contact arrangement Contact function Colour of collar Order no.

without lens

Note

1 NC + 1 NO momentary black 1.15.108.051/0000 Please include the desired lens and

diffuser in your order.

1 NC + 1 NO latching black 1.15.108.151/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO momentary black 1.15.108.052/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO latching black 1.15.108.152/0000 Please include the desired lens and

diffuser in your order.

Technical data see page 1 - 38

Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.275.032/1002

Lens, rectangular, transparent red, for LED: 5.49.275.032/1301

Lens, rectangular, transparent red, for filament lamp: 5.49.275.032/1303

Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.275.032/1402

Lens, rectangular, transparent green, for filament lamp: 5.49.275.032/1502

Lens, rectangular, transparent green, for LED: 5.49.275.032/1503

Lens, rectangular, transparent blue, for filament lamp: 5.49.275.032/1601

Accessories:

Sealing cap IP65 (for 18 x 24 collar): 5.05.200.008/0000

Protective cap (for 18 x 24 collar): 5.05.800.027/0000

Diffuser, rectangular, for filament lamp, without legend: 5.73.012.000/0202

Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214

Stock items are marked

by bold printed order numbers.

Pushbuttons 1 - 43

LUMO

75 (40)

LUMOTAST 75 IP40

LUMOTAST 75 illuminated pushbutton IP40, protruding lens, square collar

Pict.: with colourless lens Mounting hole

Contact arrangement Contact function Colour of collar Order no.

without lens

Note

1 NC + 1 NO momentary black 1.15.108.256/0000 Please include the desired lens and

diffuser in your order.

1 NC + 1 NO latching black 1.15.108.356/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO momentary black 1.15.108.257/0000 Please include the desired lens and

diffuser in your order.

2 NC + 2 NO latching black 1.15.108.357/0000 Please include the desired lens and

diffuser in your order.

Technical data see page 1 - 38

Lenses:

Lens, square, transparent colourless, for filament lamp or LED: 5.49.275.036/1002

Lens, square, transparent red, for LED: 5.49.275.036/1301

Lens, square, transparent red, for filament lamp: 5.49.275.036/1303

Lens, square, transparent yellow, for filament lamp or LED: 5.49.275.036/1402

Lens, square, transparent green, for filament lamp: 5.49.275.036/1502

Lens, square, transparent green, for LED: 5.49.275.036/1503

Lens, square, transparent blue, for filament lamp: 5.49.275.036/1601

Accessories:

Sealing cap IP65 (for 18 x 18 collar): 5.05.200.009/0000

Protective cap (for 18 x 18 collar): 5.05.800.030/0000

Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202

Diffuser, square, for LED, without legend: 5.73.013.000/0214

Stock items are marked

by bold printed order numbers.

1 - 44 Pushbuttons

LUMO

75 (40)

LUMOTAST 75 IP40

LUMOTAST 75 keylock switch IP40

Mounting hole

Technical data

General information

Form of lens see order block

Colour of collar see order block

Form of collar see order block

Dimensions

Length of collar see order block

Diameter of collar see order block

Width of collar see order block

Overall height (without

key) 7.5 mm

Mounting depth see order block

Mounting hole 16.2 mm

Mechanical design

Mounting ring nut

Terminals solder terminals

Contact system snap-action bridge contact

Contact function see order block

Contact arrangement see order block

Contact materials Ag

Illuminability no

Lock cylinder lock

Wafers 4 pins

Lock type 1D 21

Number of locking

positions 45

Main key no

Symmetric key no

Key removal position see order block

Mechanical characteristics

Rotating angle see order block

Electrical characteristics

Rated voltage AC max. 250 V

Rated voltage DC max. 220 V

Rated voltage AC/DC min. 12 V

Rated current AC max. 4 A

Rated current DC max. 0.02 A

Rated current AC/DC min. 5 mA

Contact resistance acc.

to life max. 200 mΩ

Bouncing time max. 10 ms

ESD-strength min. 14 kV

Other specifications

Operating life, at 250

V/2 A (operations) 50000 (momentary)

Operating life, at 250

V/4 A (operations) 50000 (momentary)

Degree of protection

from front side IP40

Ambient temp. operating

min. -25 °C

Ambient temp. operating

max. +70 °C

Storage temperature min. -40 °C

Storage temperature max. +80 °C

Resistance to constant

environment according to

IEC 600 68-2-3 and 2-30

Resistance at variable

environment according to

IEC 600 68-2-14 and 2-33

Weight max. 35 g

Approvals ENEC 25 T 55 (70), UL,

CSA

Flame class acc. to UL 94 V 1

Hot wire ignition acc.

to IEC 60695-2-1 yes

Description Photo Order no. Page

Accessories LUMOTAST 75 keylock switch IP40

Blanking cap, black, to cover spare holes, dimensions

18 x 24 mm 5.52.006.021/0100 5 - 28

Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 28

Stock items are marked

by bold printed order numbers.

Pushbuttons 1 - 45

LUMO

75 (40)

LUMOTAST 75 IP40

Description Photo Order no. Page

Accessories LUMOTAST 75 keylock switch IP40

Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 23

Key cap for LUMO 75 5.58.002.030/0000

Spare key for LUMO 75 5.58.004.721/0000

LUMOTAST 75 keylock switch IP40, round collar

Mounting hole

Contact

arrangement

Rotating angle Order no.

Contact function Key removal

position

Colour of collar

1 NC + 1 NO latching 0black90° 1.15.108.851/0000

1 NC + 1 NO latching 0+1 black90° 1.15.108.911/0000

1 NC + 1 NO momentary 0black45° 1.15.108.941/0000

2 NC + 2 NO latching 0black90° 1.15.108.852/0000

2 NC + 2 NO latching 0+1 black90° 1.15.108.912/0000

Technical data see page 1 - 44

Included: 2 keys.

Other lock variants and contacts available on request.

Stock items are marked

by bold printed order numbers.

1 - 46 Pushbuttons

LUMO

75 (40)

LUMOTAST 75 IP40

LUMOTAST 75 keylock switch IP40, rectangular collar

Panel cut-out

Contact

arrangement

Rotating angle Order no.

Contact function Key removal

position

Colour of collar

1 NC + 1 NO latching 0black90° 1.15.108.571/0100

1 NC + 1 NO latching 0+1 black90° 1.15.108.631/0100

1 NC + 1 NO momentary 0black45° 1.15.108.661/0100

2 NC + 2 NO latching 0black90° 1.15.108.572/0100

2 NC + 2 NO latching 0+1 black90° 1.15.108.632/0100

Technical data see page 1 - 44

Included: 2 keys.

Other lock variants and contacts available on request.