www.cherryswitches.com
Page 1 of 2, last update 2014-10-29, Specifications subject to change without notice.
Magnetic Proximity Sensors (Hall Effect)
MP1013 Sensors
Hall-effect position sensor with convenient snap-fit mounting
Description
The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall
Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output.
Features
Typical Applications
Solid state reliability
Stable output over operating temperature range
Open collector (NPN) output can be used with bipolar or CMOS
logic circuits with suitable pull-up resistor
South pole sensitive
Unipolar device (MP101301, MP101302)
Latching version available (MP101303)
RoHS compliant
Fastener-less design
IP67
Door position & interlock
Limit switch
Flow/speed
Home security
Pedal switch
Environmental Specifications
Operating / Storage Temperature (MP101301, MP101303)
-40 °C to 85 ⁰C (-40 ⁰F to 185 ⁰F)
Operating / Storage Temperature (MP101302)
-40 ⁰C to 125 °C (-40 ⁰F to 257 ⁰F)
Ingress Protection
IP67
Electrical Specifications
Operating Supply Voltage
5 to 24 VDC
Supply Current (MP101301, MP101302)
4.1 mA typ., 7.5 mA max.
Supply Current (MP101303)
2.6 mA typ., 5 mA max.
Output Current (Sink) (MP101301, MP101302)
25 mA max.
Output Current (Sink) (MP101303)
20 mA max.
Maximum Input Voltage (MP101301, MP101302)
30 VDC
Maximum Input Voltage (MP101303)
28 VDC
Maximum Reverse Voltage (MP101301, MP101302)
30 VDC
Maximum Reverse Voltage (MP101303)
None
Pull-Up Resistor
See chart
Mechanical Specifications
Housing Material
Glass-reinforced nylon plastic
*Not commonly stocked
Products
Part Number
MP101301
MP101302*
MP101303*
www.cherryswitches.com
Page 2 of 2, last update 2014-10-29, Specifications subject to change without notice.
Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be
connected between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.
Recommended External Pull-Up Resistor
Volts DC
5
9
12
15
24
Ohms
1k
1.8k
2.4k
3k
3k
Open Collector Sinking Block Diagram
Dimensions mm (inches)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CHERRY:
MP101301