CF Card 1.27mm CF CARD CONNECTOR MA TYPE Emboss Tape 50-circuit CF card connector (.050") pitch Features ------------------------ * Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type has three kinds, that is, with off-set 0.2mm (.008"), 0.35mm (.014"), and 0.75mm (.030"). The SMT type sockets have grounding springs at the No.1 & No.26 circuits. * Card frame / for type I cards For the card frame for type I cards, ultrasonic welding method is applied, which is superior in strength, heat-resistance with shorter assembly time. * Adapter / for type I cards The adapter converts the CF type I card to PCMCIA type II card. The new type that has contact spring for grounding clip has been lined up, responding to CF type I card with grounding clip. * Adapter / for type II cards In addition to the connectors applicable to CF type I cards, those for CF type II cards are also available. The adapter converts the CF type I and II card to PCMCIA type II card. Shutter mechanism with lock is applied to protect pins. The new type that has contact spring for grounding clip has been lined up, responding to CF type I card with grounding clip. * Header / for type I cards Available both in normal and reverse types, with stand off 0mm or 1.64mm (.065") each. * Ejector / for type I headers The assembly of the ejector mechanism to the mounted header is a simple one-touch operation. Available in either with right button or left button. * Header / for type II cards With stand off 0mm, both normal and reverse types are available. This header has a spring which serves as solder tab/grounding clip integrated device. * Ejector / for type II headers Specifications ------------------- * Pitch: 1.27mm (.050") * Type: Dual-row at mating section * Current rating: 0.5A AC, DC/line * Temperature range: -20C to +60C (including temperature rise in applying electrical current) * Contact resistance: Initial value/40m max. After environmental testing/max. 20m variation from initial value * Insulation resistance: 1,000M min. (500V DC) * Withstanding voltage: 500V AC/minute (Except for Adapter cards) * Mating/unmaking life: 10,000 cycles * Circuits: 50-circuits * Conforms to CFA. * Contact JST for details. The assembly of the ejector mechanism to the mounted header is a simple one-touch operation. The ejector for reverse type header has right button, with onepoint pushing mechanism, while the ejector for normal type header has left button, with two-point pushing mechanism. * Header / Space-saving type for type II cards Available both in Normal type with stand-off 1.85mm (.073") and in reverse type with stand-off 0mm. The header is supplied in embossed tape packaging, for mounting by automatic placement machines. * Ejector / Space-saving type for type II headers Two-point pushing mechanism has been adopted. Right button for normal type header and left button for reverse type header. *Space-saving type In comparison with header for type II with ejector, header for type II with space-saving type ejector can achieve 20% reduction in mounting space. 489 CF CARD CONNECTOR MA TYPE Socket ------------------------------------------------------------------ Dual-row straddle type 30.48(1.200) ICM-MA50S-TS13-5000A 1.27(.050) 1.27(.050) 33.0(1.299) 35.9(1.413) 3.3(.130) 1.35 (.053) Circuit No.1 1.27(.050) 0.5(.020) 6.0(.236) JST ICM-MA50S 3.0(.118) [8.5(.335)] No.1 mark 2.7 (.106) 0.5(.020) 30.48(1.200) 30.48(1.200) 1.27(.050) 1.27(.050) 0.4 (.016) 30.48(1.200) 50 490 Solder tail Grounding spring Off-set dimension Rib length mm(in.) Tail length mm(in.) Model No. Rib length Q'ty / box Without center 3.0(.118) 2.5(.098) ICM-MA50S-TS13-5000A 600 With (Circuit No.1, No35) center 3.0(.118) 2.5(.098) ICM-MA50S-TS13-5032 600 Dual-row straddle type 0.5 (.020) 6.0(.236) 2.5(.098) Circuit No.1 No.1 mark 0.7 (.028) 3.0(.118) [8.5(.335)] 33.0(1.299) 35.9(1.413) Circuits 3.3(.130) 1.27 (.050) ICM-MA50S-TS13-5032 Tail length Material and Finish Contact: Copper-alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Grounding spring: Phosphor bronze, nickel-undercoated, gold-plated(5032) Housing: PA6T, UL94V-0, black(5000A) : LCP, UL94V-0, black(5032) CF CARD CONNECTOR MA TYPE Socket ------------------------------------------------------------------ SMT type 30.48(1.200) ICM-MA50S-TS13-5021 1.27(.050) 1.27(.050) 2.3925(.094) No.2 0.25(.010) 0.635(.025) 4.0(.157) Tail length 2.0 (.079) No.1 No.26 Circuit No.1 0.2(.008) [8.0(.315)] No.1 mark 3.3(.130) 0.5(.020) 6.0(.236) 35.9(1.413) 33.0(1.299) No.50 No.25 31.115(1.225) 0.2(.008) Off-set amount Rib length 30.48(1.200) 1.27(.050) 1.27(.050) 2.3925(.094) No.2 0.25(.010) 0.635(.025) 6.0(.236) 0.5(.020) 0.75(.030) Tail length 2.0 (.079) Circuit No.1 No.1 mark No.1 No.26 3.3(.130) [8.0(.315)] 35.9(1.413) 33.0(1.299) 4.0(.157) ICM-MA50S-TS13-5022 No.50 No.25 0.75(.030) 31.115(1.225) Off-set amount Rib length 30.48(1.200) 1.27(.050) 2.3925 (.094) No.2 0.25(.010) 0.635(.025) 0.5 (.020) 6.0(.236) 0.2(.008) Tail length 2.0 (.079) No.1 No.26 Circuit No.1 [8.0(.315)] No.1 mark 3.3(.130) 1.27 (.050) 35.9(1.413) 33.0(1.299) 3.0(.118) ICM-MA50S-TS13-5023 No.50 No.25 31.115(1.225) 0.2(.008) Off-set amount Rib length 30.48(1.200) 1.27(.050) 2.3925 (.094) No.2 0.25(.010) 0.635(.025) SMT type With (Circuit No.1, No35) 0.5 (.020) 6.0(.236) [8.0(.315)] No.50 No.25 31.115(1.225) 0.35(.014) Rib length Circuits Solder tail Grounding spring Off-set dimension mm(in.) Rib length mm(in.) Tail length mm(in.) 50 Tail length 2.0 (.079) No.1 No.26 Circuit No.1 0.35 (.014) 4.0(.157) 35.9(1.413) 33.0(1.299) No.1 mark 3.3(.130) 1.27 (.050) ICM-MA50S-TS13-5024 Off-set amount Model No. Q'ty / reel Material and Finish 0.2 (.008) 4.0(.157) 2.0(.079) ICM-MA50S-TS13-5021T 1,500 0.75(.030) 4.0(.157) 2.0(.079) ICM-MA50S-TS13-5022T 1,500 0.2 (.008) 3.0(.118) 2.0(.079) ICM-MA50S-TS13-5023T 1,500 0.35(.014) 4.0(.157) 2.0(.079) ICM-MA50S-TS13-5024T 1,500 Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Grounding spring: Phosphor bronze, nickel-undercoated, gold-plated Housing: LCP, UL94V-0, black Note: The products listed above are supplied on embossed-tape. 491 CF CARD CONNECTOR MA TYPE Header (for Type I cards) --------------------------------------------------- Normal type (Stand off 0mm) 46.6(1.835) 34.8(1.370) 31.115(1.225) 0.635(.025) 0.3(.012) [26.5(1.043)] 19.0(.748) L 5.2 (.205) 7.5(.295) 0.5(.020) 43.03(1.694) 1.27(.050) 30.48(1.200) 1.27(.050) Circuit No.25 0.89 (.035) 0.79(.031) Circuit No.1 4.25(.167) Dimension L Circuit No. 40.16(1.581) Reverse type (Stand off 0mm) 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Circuit No.50 Circuit No.26 Dimensions mm(in.) 1, 13, 38,50 43.03(1.694) 0.79(.031) 4.25(.167) Circuit No.1 40.16(1.581) Circuit No.25 0.89 (.035) 1.27 (.050) 1.27(.050) 30.48(1.200) Circuit No.50 Circuit No.26 19(.748) L 7.5 (.295) 5.2 (.205) [26.5(1.043)] 45.6(1.795) 0.3(.012) 0.635(.025) 0.5(.020) Dimension L Circuit No. 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) 31.115(1.225) 34.8(1.370) Circuits Type Model No. Q'ty / box Normal ICM-MA50H-SS52-1151 180 Reverse ICM-MA50H-SS52-1171 180 50 492 Dimensions mm(in.) 1, 13, 38,50 Material and Finish Contact: Phosphor bronze, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 Solder tab: Brass, nickel-undercoated, tin/lead-plated CF CARD CONNECTOR MA TYPE Header (for Type I cards) --------------------------------------------------- Normal type (Stand off 1.64mm (.065")) 46.6(1.835) 34.8(1.370) 31.115(1.225) 0.635(.025) 0.3(.012) [26.5(1.043)] 19(.748) L 5.2 (.205) 7.5(.295) 0.5(.020) 43.03(1.694) 30.48(1.200) Circuit No.25 Dimension L Circuit No. Circuit No.26 Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Circuit No.50 43.03(1.694) 0.79(.031) Reverse type (Stand off 1.64mm (.065")) 6.62 (.261) 0.89 (.035) 3.55 (.140) 1.27(.050) 0.79(.031) 1.27 (.050) Circuit No.1 Circuit No.1 Circuit No.25 1.27(.050) 6.62 (.261) 3.55 (.140) 0.89 (.035) Circuit No.26 1.27(.050) Circuit No.50 30.48(1.200) 19(.748) L [26.5(1.043)] 46.6(1.835) 7.5 (.295) 5.2 (.205) Dimension L Circuit No. 0.5 (.020) 0.3(.012) 0.635(.025) Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) 31.115(1.225) 34.8(1.370) Circuits Type Model No. Q'ty / box Normal ICM-MA50H-SS52-1141 140 Reverse ICM-MA50H-SS52-1161 140 50 Material and Finish Contact: Phosphor bronze, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 Solder tab: Brass, nickel-undercoated, tin/lead-plated 493 CF CARD CONNECTOR MA TYPE Header (for Type II cards)--------------------------------------------------- Normal type (Stand off 0mm ) 0.5(.020) 32.7(1.287) [41.6(1.638)] L 5.2 (.205) 8.9(.350) 0.635(.025) 47.0(1.850) 43.2(1.701) 31.115(1.225) 0.3(.012) 0.5(.020) 1.4 (.055) 0.89 (.035) 1.27 (.050) 1.27(.050) Circuit No.1 Circuit No.26 0.79(.031) 3.55 (.140) 5.25(.207) Circuit No.25 43.03(1.694) 30.48(1.200) Dimension L Circuit No. Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Circuit No.50 Normal type (Stand off 1.85mm (.073")) 0.5(.020) 41.6(1.638) L 0.635(.025) 47.0(1.850) 31.115(1.225) 0.3(.012) 0.5(.020) 43.03(1.694) 30.48(1.200) Circuit No.25 3.5 (.138) 0.79 (.031) 1.27(.050) 1.5(.059)dia. 1.0(.039)dia. 39.2(1.543) 45.0(1.772) Circuit No.26 494 Circuit No.50 1.85(.073) Stand off amount 1.4(.055) 3.65(.144) 0.89(.035) 1.27 (.050) Circuit No.1 Dimension L Circuit No. Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) CF CARD CONNECTOR MA TYPE Header (for Type II cards)--------------------------------------------------- Reverse type (Stand off 0mm) 44.2(1.740) 40.16(1.581) 0.6(.024) [42.7(1.681)] 0.635(.025) 47.0(1.850) 31.115(1.225) 0.3(.012) Circuits 50 Type Model No. Q'ty / box Normal (Stand off 0mm) ICM-MA2H-SS52-N11B 84 Normal (Stand off 1.85mm (.073")) ICM-MA2H-SS52-N11D 72 Reverse (Stand off 0mm) ICM-MA2H-SS52-R21A 84 Dimension L Circuit No. Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Material and Finish Contact: Phosphor bronze, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: Normal / PPS, UL94V-0, black Reverse / LCP, UL94V-0, black Solder tab: Phosphor bronze, copper-undercoated, tin/lead-plated 495 CF CARD CONNECTOR MA TYPE Header (for Type II cards) / Space-saving type --------------------------------- Normal type (Stand off 1.85mm (.073")) 0.3(.012) 0.3(.012) 44.53(1.753) 31.115(1.225) 7.05(.278) 5.35 (.211) 0.3(.012) L 8.0(.315) 5.0 (.197) 0.635(.025) 45.18(1.779) 43.03(1.694) Circuit No.26 Circuit No.25 Circuit No.50 1.5(.059)dia. 3.5 (.138) Circuit No.1 0.79 (.031) 1.27 (.050) 1.27(.050) 1.4(.055) 3.65(.144) 0.89(.035) 30.48(1.200) 1.85(.073) Stand off amount 0.89(.035) 1.0(.039)dia. 39.5(1.555) Dimension L Circuit No. Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Reverse type (Stand off 0mm) 0.3(.012) 44.53(1.753) 31.115(1.225) 0.635(.025) 0.3(.012) 5.35(.211) 4.88 (.192) L 8.0(.315) 5.0 (.197) 0.3(.012) 45.18(1.779) 43.03(1.694) 0.79(.031) 3.6(.142) Circuit No.50 50 Circuit No.25 Circuit No.26 Circuit No.1 1.5(.059)dia. 1.0(.039)dia. 39.5(1.555) Dimension L Circuit No. Dimensions mm(in.) 1, 13, 38,50 5.0 0.1(.197.004) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 0.1(.167.004) 25, 26 3.5 0.1(.138.004) Type Model No. Q'ty / reel Material and Finish Normal ICM-MA2H-SS52-N13KT 650 Reverse ICM-MA2H-SS52-R13HT 750 Contact: Phosphor bronze, nickel-undercoated, Mating section...Gold-plated, Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin/lead-plated Note: The products listed above are supplied on embossed-tape. 496 1.27 (.050) 1.27(.050) Circuits 0.89(.035) 30.48(1.200) 1.85(.073) Stand off amount 1.4 (.055) 0.89(.035) CF CARD CONNECTOR MA TYPE Ejector (for Type I Header) -------------------------------------------------- Left button [29.5(1.161)] 4.2 (.165) [29.5(1.161)] 17.4(.685) 17.4(.685) 6.6(.260) Card stroke 6.6(.260) Button stroke Button stroke 23.6(.929) [3.3(.130)] [3.3(.130)] 25.0(.984) 23.6(.929) 4.2 (.165) 25.0(.984) Right button Card stroke 2.8 (.110) 2.8 (.110) 5.6(.220) 5.6(.220) 26.5(1.043) 26.5(1.043) Type Model No. Q'ty / box Right button ICM-MAE-R01 100 Frame, Rotating arm, Push bar: Stainless steel Material Left button ICM-MAE-L01 100 Push button: PPS 497 CF CARD CONNECTOR MA TYPE Ejector (for Type II header) ------------------------------------------------- For Normal type header (Left button) For Reverse type header (Right button) 23.8(.937) 4.95(.195) 27.7(1.091) 5.75(.226) 1.3(.051) 51.6(2.031) [27.6(1.087)] Card stroke [3.35(.132)] 41.7(1.642) 36.4(1.433) 39.6(1.559) [41.4(1.630)] 37.5(1.476) 2.6(.102) Card stroke [6.0 (.236)] 10.0(.394) 4.7 (.185) 0.5(.020) 6.3 (.248) Button storoke 5.0 (.197) 7.0 (.276) Button stroke 5.0 (.197) 1.3(.051) For Normal type header (Right button) 51.6(2.031) [27.6(1.087)] 4.95(.195) 2.6(.102) 6.3 (.248) [41.4(1.630)] 39.6(1.559) 0.5(.020) Applicable header 37.5(1.476) Card stroke 5.0(.197) 27.07(1.066) Button stroke 4.7 (.185) Model No. Q'ty / box For Normal type header (Left button) ICM-MAE-L33 48 For Normal type header (Right button) ICM-MAE-R32 48 For Reverse type header (Right button) ICM-MAE-R21 48 498 Material Frame, Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Push button: PBT, UL94-0, black(R32), gray(L33) Frame, Rotating arm, Push bar: Stainless steel Push button: PPS, UL94-0, black CF CARD CONNECTOR MA TYPE Ejector (for Type II header) / Space-saving type -------------------------------- For Normal type header (Stand off 1.85mm (.073")) Right button 22.57(.889) 7.35(.289) 0.75(.030) 24.57(.967) 4.0(.157) [24.9(.980)] For Reverse type header (Stand off 0mm) Right button 22.57(.889) [4.5(.177)] 12.05(.474) 37.4(1.472) [2.7(.106)] 33.0(1.299) Card stroke 5.0 (.197) Button stroke 23.58(.928) [10.43(.411)] [6.35(.250)] 4.0(.157) [24.9(.980)] Type For Normal type header (Stand off 1.85mm (.073")) Right button For Reverse type header (Stand off 0mm) Right button Model No. Q'ty / box ICM-MAE-R59E 36 ICM-MAE-R66C2 36 [32.5(1.280)] [4.5(.177)] 8.8(.346) 14.8(.583) 37.3(1.469) [2.7(.106)] Card stroke Button stroke 4.0(.157) 3.6(.142) Material and Finish Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Clinched button: Synthetic resin, black Frame: Stainless steel, nickel-undercoated, selective tin/lead-plated Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Clinched button: Synthetic resin, black Frame: Stainless steel, selective nickel-undercoated, tin/lead-plated 499 CF CARD CONNECTOR MA TYPE Card frame (for Type I cards) ------------------------------------------------ ICM-MA50F-A/B-FB Frame A Frame B 42.8(1.685) 36.4(1.433) 36.4(1.433) 2.9(.114) 2.9(.114) 42.8(1.685) ICM-MA50F-A1/B1-FB Frame A Frame B 42.8(1.685) Circuits Model No. as a set (Frame A + Frame B) ICM-MA50F-A/B-FB 36.4(1.433) 36.4(1.433) 1.9(.075) 1.9(.075) 42.8(1.685) Applicable socket ICM-MA50S-TS13-5032 ICM-MA50S-TS13-5023T ICM-MA50F-A1/B1-FB ICM-MA50S-TS13-5022T ICM-MA50S-TS13-5024T Material and Finish 150 Frame: Glass-filled PBT, UL94V-0 ICM-MA50S-TS13-5021T 50 500 Q'ty / box Cover: Stainless steel 150 CF CARD CONNECTOR MA TYPE 1.0(.039) 1.0(.039) 54.0(2.126) 42.0(1.654) 5.0(.197)max. 3.3(.130) 22.0(.866) 85.6(3.370) 43.3(1.705) 1.0(.039) 68-circuits side For CF Type I cards (PC card 5V key) 1.6 (.063) Adapter card ------------------------------------------------------------- 50-circuits side Material and Finish 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: LCP, UL94V-0 Groundingspring: Copper alloy, nickel-undercoated, gold-plated 48 2.1(.083) For CF Type I cards 68-circuits side (PC card 3.3V key with grounding clip spring) 1.0(.039) 1.0(.039) Cover: Stainless steel Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 1.6 (.063) ICM-MA50A-C441N Q'ty / box 54.0(2.126) 42.0(1.654) 5.0(.197)max. 3.3(.130) 22.0(.866) 85.6(3.370) 43.3(1.705) Model No. 50-circuits side Model No. ICM-MA50A-CLG441N Q'ty / box Material and Finish 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 Cover: Stainless steel Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 Contact spring: Copper alloy 501 CF CARD CONNECTOR MA TYPE 1.0(.039) 1.6 (.063) 1.0(.039) 54.0(2.126) 42.0(1.654) 5.0(.197)max. 33.35(1.313) 3.3(.130) 85.6(3.370) 68-circuits side For CF Type II cards (PC card 5V key with grounding clip spring) 1.0(.039) Adapter card ------------------------------------------------------------- 50-circuits side Material and Finish 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 85.6(3.370) For CF Type II cards 68-circuits side (PC card 3.3V key with grounding clip spring) 1.0(.039) 1.0(.039) Cover: Stainless steel Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 Contact spring: Copper alloy Shutter: PPS, UL94V-0 Spring: Stainless steel Lock: Stainless steel 1.6 (.063) 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 54.0(2.126) 42.0(1.654) 5.0(.197)max. 3.3(.130) 33.35(1.313) ICM-MA2A-C454N Q'ty / box 2.1(.083) Model No. 50-circuits side Model No. ICM-MA2A-CL454N 502 Q'ty / box Material and Finish 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: PPS, UL94V-0 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating section...Gold-plated Solder tail...Tin/lead-plated Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 Cover: Stainless steel Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 Contact spring: Copper alloy Shutter: PPS, UL94V-0 Spring: Stainless steel Lock: Stainless steel CF CARD CONNECTOR MA TYPE Taping specifications ------------------------------------------------------ Feeding direction 380.0. 2.0 (14.961 .079)dia. Carrier tape 2.00.1 (.079.004) 26.20.1(1.031.004) 52.40.1(2.063.004) Socket Tail tape (Unloaded area) 40(1.575)min. 2.00.5(.079.020) Cover tape Lead tape (Unloaded area) 20 vacancies min. Connector loaded area Carrier tape 12.00.1 (.472.004) Q'ty / reel: 1,500 Carrier tape Cover tape 4.00.1 1.250.1 (.157.004) (.049.004) 1.750.1 (.069.004) Feeding direction 1.550.05 (.061.002)dia. 26.20.1(1.031.004) 52.40.1(2.063.004) 56.00.3(2.205.012) Normal type (Stand off 1.85mm (.073")) 400(15.748)min. 56.00.3(2.205.012) Feeding direction 1.550.05 4.00.1 (.061.002)dia. (.157.004) 1.750.1 (.069.004) [13.0(.512)]dia. 58.0+2.5 -1.0 (2.283+.098 -.039 ) Cover tape leader area Feeding direction Q'ty / reel: 650 16.00.1 (.630.004) Carrier tape Cover tape 1.250.1 4.00.1 (.157.004) (.049.004) 1.750.1 (.069.004) Feeding direction 1.550.05 (.061.002)dia. 26.20.1(1.031.004) 52.40.1(2.063.004) 56.00.3(2.205.012) Reverse type (Stand off 0mm) Q'ty / reel: 750 16.00.1 (.630.004) Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. Note: 2. Specifications are subject to change without prior notice. 503 CF CARD CONNECTOR MA TYPE PC board layout (viewed from component side) ------------------------------------ For Type I cards / Stand off 0mm Normal type / Reverse type 460.05 (1.811.002) 43.20.05 (1.701.002) 40.160.05 (1.581.002) 0.6350.05(.025.002) 0.40.035(.016.001) Pattern pitch Pattern width 2---1.7+0.1 0 (.067 +.004 0 )dia. 50.05 (.197.002) 14.50.05 (.571.002) 6.350.05 (.250.002) 2.3(.091) 31.1150.05(1.225.002) For Type I cards / Stand off 1.64mm (.065") Normal type / Reverse type 460.05 (1.811.002) 43.20.05 (1.701.002) 40.160.05 (1.581.002) 50.05 (.197.002) 504 Pattern pitch 0.40.035(.016.001) Pattern width 2---1.7+0.1 0 (.067+.004 0 )dia. 2---2.2+0.1 0 (.087 +.004 0 )dia. 6.350.05 (.250.002) 0.6350.05(.025.002) 3.0 (.118) 14.50.05 (.571.002) 2.3(.091) 31.1150.05(1.225.002) CF CARD CONNECTOR MA TYPE PC board layout (viewed from component side) ------------------------------------ For Type II cards / Stand off 0mm For Type II cards / Stand off 1.85mm(.073") 10.0(.394) 35.0(1.378) 47.750.05(1.880.002) 43.170.05(1.700.002) 1.8 (.071) 2---2.2+0.05 0 0 )dia. (.087+.002 6.00.05(.236.002) 4.40.05(.173.002) 22.40.05(.882.002) 6.3 (.248) 28.50.05(1.122.002) 47.750.05(1.880.002) 43.170.05(1.700.002) 40.90.05(1.610.002) 39.20.05(1.543.002) 31.1150.05(1.225.002) 0.6350.05(.025.002) 0.40.035(.016.001) (Pattern pitch) (Pattern width) 22.7(.894) 3---1.1+0.05 0 (.043+.002 -0 )dia. 1.6+00.5 0 (.063 +-0.002)dia. 1.6+0.050 0 )dia. (.063+.002 6.3 (.248) 43.20.05(1.701.002) 39.20.05(1.543.002) 31.1150.05(1.225.002) 0.6350.05(.025.002) 0.40.035(.016.001) (Pattern pitch) (Pattern width) 6.00.05(.236.002) 22.40.05(.882.002) 28.50.05(1.122.002) 1.8(.071) 2---2.2+0.05 0 (.087+.002 -0 )dia. Normal type 2.70.05(.106.002) Normal type 3---1.1+0.05 0 0 )dia. (.043+.002 45.00.05(1.772.002) 38.23(1.505) 45.00.05(1.772.002) 1.85mm (.073") height component mountable area For Type II cards / Stand off 0mm 1.6+0.05 0 (.063+-0.002)dia. 3---1.1+0.05 0 (.043+.002 -0 )dia. 48.00.05(1.890.002) 43.60.05(1.717.002) 6.350.05 (.250.002) 40.90.05(1.610.002) 40.160.05(1.581.002) 31.1150.05(1.225.002) 0.6350.05(.025.002) 0.40.035(.016.001) (Pattarn pitch) (Pattarn width) 5.80.05(.228.002) 25.50.05(1.004.002) 30.00.05(1.181.002) 2.30.05 (.091.002) 0 2---2.2+0.05 (.087+.002 -0 )dia. 5.50.05(.217.002) Reverse type 44.20.05(1.740.002) 505 CF CARD CONNECTOR MA TYPE PC board layout (viewed from component side) ------------------------------------ For Type II cards / Stand off 1.85mm (.073") Space-saving type 1.1+0.050 (.043+.002 0 )dia. 41.230.05(1.623.002) 0.2(.008) 1.2(.047) 3.00.05(.118.002) 23.80.05(.937.002) 44.380.05(1.747.002) 2 through-holes 2.5 (.098) 1.0(.039) 34.050.05(1.341.002) 28.650.05(1.128.002) 26.60.05(1.047.002) 1.80.05(.071.002) 8.150.05 (.321.002) 44.530.05(1.753.002) 39.50.05(1.555.002) 31.1150.05(1.225.002) 0.6350.05(.025.002) 0.40.05(.016.002) (Pattern pitch) (Pattern width) 1.6+0.050 Header mounting position 0 )dia. (.063+.002 (Components cannot be mounted inside of this area.) R0.5 1.550.05(.061.002) 3.850.05(.152.002) Normal type 34.110.05(1.343.002) 43.330.05(1.706.002) 44.91(1.768) 2.8(.110) 2.8 (.110) Component height ; 1.55mm (.061") max. Ejector mounting position (Components cannot be mounted inside of this area.) Component height ; 1.85mm (.073") max. For Type II cards / Stand off 0mm Space-saving type 1.6+0.050 0 )dia. (.063+.002 506 3.350.05 (.132.002) 1.80.05(.071.002) 44.380.05(1.747.002) 43.330.05(1.706.002) R0.5 0.2(.008) 1.2(.047) 2 through-holes 1.0 (.039) 1.20.05(.047.002) 1.1+0.050 (.043+.002 0 )dia. 33.950.05(1.337.002) [37.3(1.469)] 8.150.05 3.00.05 (.118.002) (.321.002) 45.130.05(1.777.002) 39.50.05(1.555.002) 31.1150.05(1.225.002) 0.6350.05(.025.002) 0.40.05(.016.002) (Pattern pitch) (Pattern width) 1.90.05 (.075.002) 28.550.05(1.124.002) 26.50.05(1.043.002) 3.850.05(.152.002) 1.550.05(.061.002) Reverse type Components cannot be mounted inside of this area. 43.630.05(1.718.002) 1.20.05(.047.002)