Customer Information sneet DRAWING No. M8Q~-7 16XXXX ORDER CODE: M8@~-7 16XXXX No. OF SMALL CONTACTS Q6, 15, 24, 38, 42 FINISH @5 = GOLD BODY, GOLD CLIP POTTING WALLS BLANK = POTTING WALLS A_= REMOVE POTTING WALLS SPECIFICATION MATERIALS: MOULDING = POLYAMIDE 46 UL94V-@ CONTACTS = CLIP - BERYLLIUM COPPER, BODY - BRASS JACKSCREWS = STAINLESS STEEL, CIRCLIP = SPRING STEEL FINISH: CONTACTS = @25-030u GOLD BODY, @3@. GOLD CLIP CIRCLIP = ZINC & PASSIVATE ELECTRICAL: CURRENT RATING AT 25C = 3.0A MAX (SMALL), 15.04 MAX (LARGE). CURRENT RATING AT 85C = 2.2A MAX (SMALL), 11.04 MAX (LARGE). VOLTAGE PROOF = 368V AC/DC CONTACT RESISTANCE (INITIAL) = 2@ MILLIOHMS MAX. CONTACT RESISTANCE (AFTER CONDITIONING) = 25 MILLIOHMS MAX, INSULATION RESISTANCE (INITIAL) = 100@ MEGOHMS MIN. INSULATION RESISTANCE (AFTER CONDITIONING) = 188 MEGOHMS MIN. MECHANICAL: DURABILITY = S@@ OPERATIONS INSERTION FORCE = 2.8N MAX, L@N MIN WITHORAWAL FORCE = 1.8N MAX, @.2N MIN ENVIRONMENTAL: TEMPERATURE RANGE = -5SC TO +#125C PACKING: TRAYS FOR COMPLETE SPECIFICATION, SEE COMPONENT SPECIFICATION C@17XX (LATEST ISSUE). NOTES: 1, FROM No. 1 POSITION, CONTACTS NUMBERED IN SEQUENCE FROM RIGHT TO LEFT AND FROM BOTTOM ROW TO TOP ROW (LOOKING ON BACK FACE). 2. CONNECTOR SUPPLIED UN-ASSEMBLED. No. 1 CONTACT (OS) E Py ) Sey ASG Ou rd, SHEET 2 OF 2] IF IN DOUBT - ASK | 6.28 MAX (C) NOT TO SCALE 2.08 x No. OF WAYS PER ROW + 27.18 MAX ro x No. OF WAYS PER ROW + am - M2.5x@.45-6g 2.88 TYP > <= THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 8.45 MAX 28 A/F CZIZg Yd KA. La =< | c) brs 3.97 MAX [= 6.00 + 4.08 |__| ] jf | \I I | JAE F 6 124.04.83 7410 NAME | ISS.f DATE C/NOTE ee APPROVED: I ! ->| e208 TYP Y CHECKED: Ls oA 4 450-+<sfe__sl->99 x No. OF PITCHES PER ROW 3. SMALL CRIMPS SUITABLE FOR WIRE GAUGE 22 AWG (19/@.15mm), MAX INSULATION DIAMETER = @1,1@mm. LARGE CRIMPS SUITABLE FOR WIRE GAUGES 18 & 20 AWG (19/@.2mm & 19/0.26mm). RECOMMENDED. BS3G218 TYPE A WIRE DRAWN: J. CLAY CUSTOMER REF: ASSEMBLY DRG: AS RAY AVAIL | HARWIN INC HARWIN PLC HARWIN PTE U.S.A. UK. SINGAPORE TEL: (812) 285 @@55 JTEL: @23 9237 O451] TEL: 65 7794999 FAX: (812) 285 @@56 JFAX: @23 9231 4590] FAX: 65 7793868 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT SE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES xX = +imm XX = 8.25mm XXX = #8.18mm X.XXX = #0.01mm ANGLES = +5 UNLESS STATED MATERIAL: SEE ABOVE THLE: 3-ROW 2mm PITCH FEMALE CRIMP + POWER SOCKET ASSY (LARGE BORE) + JACKSCREWS FINISH: SEE ABOVE S/AREA: mm DRAWING NUMBER: M8@-7 16XXXX SHT 70F 2