RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 1 of 7
M15KP22A – M15KP280CA(e3)
Available
15,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
Screening in
reference to
MIL-PRF-19500
available
DESCRIPTION
This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended
voltage range and als o pro vi des a variety of high reliability, uni- and bi-directional options as
well. RoHS compliant versions are also available. These devices have the ability to clamp
dangerous high voltage transients such as secondary effects of lightning strikes, providing
circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is
virtually instantaneous. It also provides protection from transients caused by inductive load
dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4.
Case 5A
(DO-204AR)
Package
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
• Available in both unidirectional and bidirectional configurations
• 3σ lot norm screening performed on standby current ID
• 100% surge tested devices
• Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1)
• Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic
Product Portfolio for more details on the screening options.
(See part nomenclature for all optio ns.)
• High reliability controlled devices have wafer fabrication and assembly lot traceability
• Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
• RoHS compliant versions are available
APPLICATIONS / BENEFITS
• Selections from 22 to 280 volts stand-off voltage (VWM)
• Economical TVS serie s for thru-hole mounting
• Protection from switching transients & induced RFI
• Fast sub-nanosecond response (unidirectional)
• Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
• Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedan ce:
Class 1, 2, 3, 4: M15KP22A to M15KP280CA
Class 5: M15KP22A to M15KP280CA (short distan ce)
Class 5: 1M5KP22A to M15KP110CA (long distance)
• Secondary lightning protection per IEC61000-4-5 with 12 ohms sour ce impedan ce:
Class 1 & 2: M15KP22A to M15KP280CA
Class 3: M15KP22A to M15KP240CA
Class 4: M15KP22A to M15KP120CA
• Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M15KP22A to M15KP220CA
Class 3: M15KP22A to M15KP110CA
Class 4: M15KP22A to M15KP54CA
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 2 of 7
M15KP22A – M15KP280CA(e3)
MAXIMUM RATINGS @ 25 ºC unless otherwise noted
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
T
J
and
TSTG
-65 to +150
oC
Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)
lead length from body
RӨJL 20
o
C/W
Thermal Resistance, Juncti on to Amb ient (1)
RӨJA
80
oC/W
Peak Pulse Power Dissipation (2)
10/1000us
PPP
15,000
W
Steady-State Power Dissipation @ TL = 30 ºC 3/8 inch
(10 mm) from body
PD 6
1.56
(1)
W
Tclamping (0 volts to V(BR) min, theoretical)
Unidirectional
Bidirectional
< 100
< 5
ps
ns
Surge Peak Forward Current (3)
IFSM
200
A
Solder Temperature @ 10 s
260
oC
Notes: 1 . When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2).
3. At 8.3 ms half-sine wave for unidirectional devices only.
MECHANICAL and PACKAGING
• CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
• TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Sol dera ble per M IL-STD-750, method 2026.
• MARKING: Part number.
• POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 1.4 grams.
• See Package Dimensions on last page.
PART NOMENCLATURE
M 15 K P 22 C A (e3)
Reliability Level*
M
MA
MX
MXL
(*see Hirel Non-Hermetic
Product Portfolio)
Peak Pulse Power
Kilowatt Rating
Encapsulated Plastic
Package
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Voltage Tolerance
A = 5% tolerance level
Polarity
C = Bi-directional
Blank = Unidirectional
Stand-off Voltage Rating
(see Electrical Characteristics
table)
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 3 of 7
M15KP22A – M15KP280CA(e3)
SYMBOLS & DEFINITIONS
Symbol
Definition
αV(BR) Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
I(BR)
Breakdown Current: The current used for measuri ng Break down Voltage V(BR).
ID
Standby Current: The current through the device at rated stand-off voltage.
IFSM
Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all
repetitive transients (ref JESD282-B).
IPP Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
PPP
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the max imu m-rated value of the product of IPP and VC.
V(BR)
Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown region.
VC
Clamping Voltage: The voltage across the device in a region of low differential resistanc e during the appl ic atio n of an
impulse current (IPP) for a specified waveform.
VWM
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 4 of 7
M15KP22A – M15KP280CA(e3)
ELECTRICAL CHARACTERISTICS @ 25 ºC
PART NUMBER
REVERSE
STAND-
OFF
VOLTAGE
VWM
(Note 1)
BREAKDOWN
VOLTAGE
V(BR) @ I(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
PEAK PULSE
CURRENT
IPP
(FIG. 2)
MAXIMUM
TEMPERATURE
COEFFI CIENT OF
V(BR)
αV(BR)
V
V
mA
V
µA
A
mV/ºC
M15KP22A
22
24.4
10
37.1
500
404
24
M15KP24A
M15KP26A
24
26
26.7
28.9
5
5
40.7
44.0
150
50
369
341
27
29
M15KP28A
M15KP30A
28
30
31.1
33.3
5
5
47.5
50.7
25
15
316
296
31
34
M15KP33A
M15KP36A
33
36
36.7
40.0
5
5
54.8
59.7
10
10
274
251
38
41
M15KP40A
M15KP43A
40
43
44.4
47.8
5
5
65.8
69.7
10
10
228
215
46
50
M15KP45A
M15KP48A
45
48
50.0
53.3
5
5
73.0
77.7
10
10
205
193
52
56
M15KP51A
M15KP54A
51
54
56.7
60.0
5
5
82.8
87.5
10
10
181
171
60
63
M15KP58A
M15KP60A
58
60
64.4
66.7
5
5
94.0
97.3
10
10
160
154
68
71
M15KP64A
M15KP70A
64
70
71.1
77.8
5
5
104
114
10
10
144
132
76
83
M15KP75A
M15KP78A
75
78
83.3
86.7
5
5
122
126
10
10
123
119
89
93
M15KP85A
M15KP90A
85
90
94.4
100
5
5
137
146
10
10
109
103
102
109
M15KP100A
M15KP110A
100
110
111
122
5
5
162
178
10
10
93
84
121
133
M15KP120A
M15KP130A
120
130
133
144
5
5
193
209
10
10
78
72
145
157
M15KP150A
M15KP160A
150
160
167
178
5
5
243
259
10
10
62
58
183
195
M15KP170A
M15KP180A
170
180
189
200
5
5
275
291
10
10
55
52
207
219
M15KP200A
M15KP220A
200
220
222
245
5
5
322
356
10
10
47
42
243
269
M15KP240A
M15KP260A
240
260
267
289
5
5
388
419
10
10
39
36
293
317
M15KP280A
280
311
5
452
10
33
342
** Consult factory for availability of the 17 and 18 Volt devices on a special order basis.
NOTES:
1. Transient V oltage Suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the
dc or continuous peak operating voltage level.
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 5 of 7
M15KP22A – M15KP280CA(e3)
GRAPHS
td – Pulse Width
FIGURE 1
Peak Pulse Power Rating Curve
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000 µs
FIGURE 2
Pulse Waveform for 10/1000 µs Expo nen tia l Surge
Pulse Current in Percent of IPP
Ppp – Peak Pulse Power (kW)
Waveform Non-Repetitive
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 6 of 7
M15KP22A – M15KP280CA(e3)
GRAPHS (continued)
V(BR) – Reverse Breakdown Voltage (V)
FIGURE 3
Typical Junction Capacitance
NOTE: For bidirectional construction, capacitance will be one-half that shown.
Lead or Ambient Temperature °C
FIGURE 4
Derating Curve
C, Capacitance (pF)
Peak Pulse Power (P
pp
) or contin uous
Average Power in Percent of 25°C
RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 7 of 7
M15KP22A – M15KP280CA(e3)
PACKAGE DIMENSIONS
Dimensions
Dim
Inch
Millimeters
Min
Max
Min
Max
LL
0.750
-
19.05
-
BL
0.365
0.385
9.27
9.78
BD
0.235
0.255
5.97
6.48
LD
0.047
0.053
1.194
1.346
