DSS 10-006A Advanced Technical Information IFAV = 10 A VRRM = 60 V VF = 0.62 V Power Schottky Rectifier VRSM VRRM V V 60 60 Type A C TO-220 AC C A DSS 10-006A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV TC = 160C; rectangular, d = 0.5 IFSM 35 10 A A TVJ = 45C; tp = 10 ms (50 Hz), sine 120 A EAS IAS = 1 A; L = 100 H; TVJ = 25C; non repetitive 0.05 mJ IAR VA = 1.5 * VRRM typ.; f = 10 kHz; repetitive 0.1 A (dv/dt)cr 5000 TVJ TVJM Tstg Ptot TC = 25C Md mounting torque Weight typical Symbol Conditions IR TVJ = 25C VR = VRRM TVJ = 125C VR = VRRM VF IF = 10 A; IF = 10 A; IF = 20 A; V/s -55...+175 175 -55...+150 C C C 90 W 0.4...0.6 Nm 2 g Characteristic Values typ. max. 10 0.7 TVJ = 125C TVJ = 25C TVJ = 125 C RthJC RthCH with heatsink compound Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % 20 1.0 A mA 0.62 0.73 0.70 V V V 1.6 K/W K/W 0.3 Features * * * * * International standard package Very low VF Extremely low switching losses Low IRM-values Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see Outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2003 IXYS All rights reserved 320 Data according to IEC 60747 and per diode unless otherwise specified 1-1 http://store.iiic.cc/