3/11/2021 Hand Held Enclosures (1599 Series) - Hammond Mfg. Quality Products. Service Excellence. Hand Held Enclosures 1599 Series Flame Retardant ABS w/ PCB Standoffs, Battery Compartments Features: Attractively styled and ergonomically designed for use as a "hand-held" instrument enclosure. Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings. Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts. Recessed top for membrane display or pad. Lap joint construction provides protection against access of dust and splashing water. Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. Designed to meet IP54. Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation. If EMI/ RFI shielding is required, try 1599RFI series Photo Features: Optional accessories include belt clips and battery dividers. Standard models use machine screws into brass bushings. Economy models use self tapping screws. All sizes available with or without battery door. All models have PC board standoffs on the inside top and bottom. Accessories: Screws: https://www.hammfg.com/electronics/small-case/plastic/1599 1/3 3/11/2021 Hand Held Enclosures (1599 Series) - Hammond Mfg. Accessory screws for mounting P.C. boards into standoffs (#4 x 1/4" pan head) P/N 1593ATS50 (qty. 50), P/N 1593ATS100 (qty. 100). Replacement machine screw, used in flame retardant ABS 1599B series (ie...with brass inserts). M3 - 0.5 x 20 mm 1594MS100 - Package of 100 or 1594MS100BK (black oxide) Package of 100. Replacement machine screw, used in flame retardant ABS 1599E, H & K series (ie...with brass inserts). M3 - 0.5 x 12 mm 1599HMS100 - (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. Optional Battery Holders Designed for our battery door enclosure (part numbers ending in BAT). Includes all the parts required to install the battery or batteries. Includes the battery holder, wires and foam anti-rattle pad. Refer to "Battery Holder Compatibility" table below. Optional Battery Dividers: Grey ABS plastic panel barriers. Insert vertically into the P.C. card guides. Sold individually. Refer to "Enclosures" table below for compatibility. Optional Belt Clip Black 1599CLIP Gray: 1599CLIPGY Molded from tough nylon (choice of Black or Grey). Includes 2 nylon screws (insulated to avoid internal interference). Mounting template included. Part numbers ending in "CP" come with these clips installed. All other 1599 enclosures are compatible. Enclosures Standard Economy Color Battery Door Belt Clip Included Length Width Depth Battery Divider Black No No 5.12 2.56 0.97 1599BD-BULK Grey No No 5.12 2.56 0.97 1599BD-BULK Black Yes No 5.12 2.56 0.97 1599BD-BULK Grey Yes No 5.12 2.56 0.97 1599BD-BULK 1599BBKCP Black No Yes 5.12 2.56 0.97 1599BD-BULK 1599BGYCP Grey No Yes 5.12 2.56 0.97 1599BD-BULK 1599BBKBATCP Black Yes Yes 5.12 2.56 0.97 1599BD-BULK 1599BGYBATCP Grey Yes Yes 5.12 2.56 0.97 1599BD-BULK 1599EBK Black No No 6.70 3.35 1.33 1599ED-BULK Grey No No 6.70 3.35 1.33 1599ED-BULK Black Yes No 6.70 3.35 1.33 1599ED-BULK Grey Yes No 6.70 3.35 1.33 1599ED-BULK 1599BBK 1599BGY 1599BSGY 1599BBKBAT 1599BGYBAT 1599EGY 1599BSGYBAT 1599ESGY 1599EBKBAT 1599EGYBAT 1599ESGYBAT https://www.hammfg.com/electronics/small-case/plastic/1599 2/3 3/11/2021 Hand Held Enclosures (1599 Series) - Hammond Mfg. Standard Economy 1599HBK 1599HGY 1599HSGY 1599HBKBAT 1599HGYBAT 1599HSGYBAT 1599KBK 1599KGY 1599KSGY 1599KBKBAT 1599KGYBAT 1599KSGYBAT Color Battery Door Belt Clip Included Length Width Depth Battery Divider Black No No 8.66 4.33 1.73 1599HD-BULK Grey No No 8.66 4.33 1.73 1599HD-BULK Black Yes No 8.66 4.33 1.73 1599HD-BULK Grey Yes No 8.66 4.33 1.73 1599HD-BULK Black No No 8.66 5.50 1.60 Grey No No 8.66 5.50 1.60 Black Yes No 8.66 5.50 1.60 Grey Yes No 8.66 5.50 1.60 Battery Holder Compatibility Part Number Battery Holder Kit For: Fits Battery Door Enclosure Size: BH1AAW 1 AA Cell 1599E, 1599H & 1599K series BH2AAW 2 AA Cells 1599E, 1599H & 1599K series BH3AAW 3 AA Cells 1599H & 1599K series BH4AAW 4 AA Cells 1599H & 1599K series BH1AAAW 1 AAA Cell 1599B, 1599E, 1599H & 1599K series BH2AAAW 2 AAA Cells 1599B, 1599E, 1599H & 1599K series BH3AAAW 3 AAA Cells 1599E, 1599H & 1599K series BH4AAAW 4 AAA Cells 1599H & 1599K series BS61 1 - 9V Cell 1599B, 1599E, 1599H & 1599K series Data subject to change without notice (c) 2021. Hammond Manufacturing Ltd. All rights reserved. https://www.hammfg.com/electronics/small-case/plastic/1599 3/3