SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105C MVE @Rated voltage range : 6.3 to 450V, capacitance range : 0.47 to 6800MF @Endurance : 1000 to 2000 hours at 105C @Case size range : F4B5.5 to F18B21.5 @Solvent-proof type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) downsized size extended MVK ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +105C 6.3 to 450Vdc P20%(M) Rated voltage(Vdc) 6.3 to 100V 160 to 450V D55 to J10 I=0.01CV or 3MA, whichever is greater (2 minutes) K14 to M22 I=0.03CV or 4MA, whichever is greater (1 minute) I=0.04CV+100MA (1minute) Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) See STANDARD RATINGS (20C) (20C, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 to 450V Z(-25C)/Z(+20C) 2 2 2 2 2 3 4 3 D55 to J10 Z(-40C)/Z(+20C) 3 3 3 4 6 8 12 4 Z(-25C)/Z(+20C) 2 2 2 2 3 4 5 2 3 6 K14 to M22 Z(-40C)/Z(+20C) (120Hz) 3 3 3 4 6 8 10 3 6 10 The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified period of time at 105C. Case code D55 to F80 H10 to M22 2000 hours Time 1000 hours [P20% of the initial value Capacitance change [P30% of the initial value [200% of the initial specified value D.F. (tanE) [300% of the initial specified value [The initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours (500 hours for B55 to F80 size) at 105C without voltage applied. H10 to H22 Case code D55 to F80 Capacitance change [P25% of the initial value [P20% of the initial value D.F. (tanE) [200% of the initial specified value [200% of the initial specified value Leakage current [The initial specified value [The initial specified value ?DIMENSIONS (Terminal Type=VC or VE) [mm] ?MARKING D55 to K16 (VC) D55 to J10 Ex)16V22MF W 7hE P CP0.2 BP0.2 FDP0.5 (20C, 120Hz) 0.3max. LP0.3 (Note) 22 16V AP0.2 Note : LP0.5 for H10, J10, K14 and K16 L17 to M22 (VE : with dummy terminals) W P CP0.2 BP0.2 FDP0.5 0.3max. AP0.2 LP0.5 Case code D55 E55 F55 F60 F80 H10 J10 K14 K16 L17 L22 M17 M22 D 4 5 6.3 6.3 6.3 8 10 12.5 12.5 16 16 18 18 L 5.2 5.2 5.2 5.7 7.7 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 A 4.3 5.3 6.6 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 4.3 5.3 6.6 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 K14 to M22 Ex)25V1000MF 0V MVE 1000 25V : Dummy terminals ?PART NUMBERING SYSTEM MVE 50 VC 220 M J10 Tray code (TR : If necessary) Case code Cap tolerance (P20%) Nominal cap code Terminal type (VC or VE) Rated voltage in volts Series name (1/2) Capacitance 10MF 100MF 1000MF Code 10 100 1000 CAT. No. E1001D SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105C ?STANDARD RATINGS Vdc 6.3 mF 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 150 D55 E55 E55 F55 22 34 38 69 10 16 0.30 0.30 0.30 0.30 E55 E55 F55 F55 F80 30 34 48 69 100 0.24 0.24 0.24 0.30 0.35 D55 E55 F55 F55 F55 F80 25 35 17 30 45 48 69 100 0.20 0.20 0.20 0.20 0.26 0.28 E55 F55 F55 F55 F80 H10 27 44 50 60 100 240 0.16 0.16 0.16 0.16 0.18 0.18 D55 E55 F55 F60 F80 F80 H10 16 27 44 54 80 100 260 50 0.14 0.14 0.14 0.14 0.16 0.16 0.16 220 F80 120 0.45 F80 120 0.35 F80 120 0.28 H10 320 0.18 J10 375 0.16 330 H10 290 0.40 H10 290 0.35 H10 290 0.28 J10 450 0.16 J10 450 0.16 470 H10 320 0.45 H10 320 0.35 H10 320 0.28 J10 490 0.18 K14 L17 520 0.22 650 0.22 680 H10 340 0.45 1,000 J10 410 0.40 J10 K14 L17 470 550 650 0.28 0.30 0.30 L17 M17 820 880 0.26 0.26 750 0.22 L17 M17 1000 0.22 1,500 J10 K14 L17 K16 M17 L22 M17 L22 M22 950 L17 M17 1000 L22 1200 M17 1200 0.32 0.32 0.34 0.34 L22 1250 M22 1300 0.28 0.28 M22 1450 0.24 2,200 3,300 4,700 6,800 550 680 840 850 1000 1200 1200 1200 1350 0.45 0.40 0.40 0.42 0.42 0.44 0.44 0.48 0.48 J10 410 0.35 K16 L17 L17 M17 L22 M22 750 850 1000 1100 1300 1350 0.36 0.36 0.38 0.38 0.40 0.40 63 D55 D55 D55 D55 E55 F55 F60 F80 F80 H10 5 8 12 15 20 32 47 65 80 230 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 J10 375 0.14 K14 L17 L17 M17 500 600 700 750 0.18 0.18 0.18 0.18 M22 1200 0.18 D55 D55 D55 E55 F55 F55 F80 H10 H10 J10 5 8 12 17 22 32 58 140 170 310 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 K14 L17 L17 M17 L22 M17 470 560 700 750 900 900 0.14 0.14 0.14 0.14 0.14 0.14 DF (tanE at 20C, 120Hz) Rated ripple current (mArms at 105C, 120Hz) Case code Non solvent-proof Vdc 100 mF 160 200 3.3 4.7 10 250 400 65 105 0.15 0.15 K16 L17 50 0.20 85 0.20 M22 130 0.20 M22 K14 80 0.15 K14 K16 K16 110 0.15 L17 180 0.15 22 H10 100 0.12 33 J10 150 0.12 K14 95 0.15 L17 220 0.15 L22 M17 230 230 0.15 0.15 47 K14 250 0.10 L17 260 0.15 L22 M17 270 270 0.15 0.15 M22 280 0.15 68 K14 300 0.10 L22 M17 320 320 0.15 0.15 M22 330 0.15 K14 L17 L22 M17 M22 380 450 750 750 980 L22 380 0.15 100 220 330 0.10 0.10 0.10 0.10 0.10 450 K14 K16 L17 40 50 85 0.20 0.20 0.20 130 0.20 DF (tanE at 20C, 120Hz) Rated ripple current (mArms at 105C, 120Hz) Case code (2/2) CAT. No. E1001D