54F/74F151A 8-Input Multiplexer General Description The 'F151A is a high-speed 8-input digital multiplexer. It provides in one package the ability to select one line of data from up to eight sources. The 'F151A can be used as a Commercial universal function generator to generate any logic function of four variables. Both assertion and negation outputs are provided. Package Number Military 74F151APC 54F151ADM (Note 2) Package Description N16E 16-Lead (0.300x Wide) Molded Dual-In-Line J16A 16-Lead Ceramic Dual-In-Line 74F151ASC (Note 1) M16A 16-Lead (0.150x Wide) Molded Small Outline, JEDEC 74F151ASJ (Note 1) M16D 16-Lead (0.300x Wide) Molded Small Outline, EIAJ 54F151AFM (Note 2) W16A 16-Lead Cerpack 54F151ALM (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C Note 1: Devices also available in 13x reel. Use suffix e SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix e DQMB, FMQB and LMQB. Logic Symbols Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak Pin Assignment for LCC TL/F/9481-3 IEEE/IEC TL/F/9481 - 1 TL/F/9481 - 2 TL/F/9481-5 TRI-STATEE is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/9481 RRD-B30M115/Printed in U. S. A. 54F/74F151A 8-Input Multiplexer November 1994 Unit Loading/Fan Out 54F/74F Pin Names I0 - I7 S0 - S2 E Z Z Description U.L. HIGH/LOW Input IIH/IIL Output IOH/IOL Data Inputs Select Inputs Enable Input (Active LOW) Data Output Inverted Data Output 1.0/1.0 1.0/1.0 1.0/1.0 50/33.3 50/33.3 20 mA/b0.6 mA 20 mA/b0.6 mA 20 mA/b0.6 mA b 1 mA/20 mA b 1 mA/20 mA Functional Description Truth Table The 'F151A is a logic implementation of a single pole, 8-position switch with the switch position controlled by the state of three Select inputs, S0, S1, S2. Both assertion and negation outputs are provided. The Enable input (E) is active LOW. When it is not activated, the negation output is HIGH and the assertion output is LOW regardless of all other inputs. The logic function provided at the output is: Z e E # (I0 S2 S1 S0 a I1 S2 S1 S0 a I2 S2 S1 S0 a I3 S2 S1 S0 a I4 S2 S1 S0 a I5 S2 S1 S0 a I6 S2 S1 S0 a I7 S2 S1 S0) The 'F151A provides the ability, in one package, to select from eight sources of data or control information. By proper manipulation of the inputs, the 'F151A can provide any logic function of four variables and its negation. Inputs Outputs E S2 S1 S0 Z Z H L L L X L L L X L L H X L H L H I0 I1 I2 L I0 I1 I2 L L L L L L H H H H H L L H H H L H L H I3 I4 I5 I6 I7 I3 I4 I5 I6 I7 H e HIGH Voltage Level L e LOW Voltage Level X e Immaterial Logic Diagram TL/F/9481 - 4 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. 2 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Storage Temperature b 65 C to a 150 C Ambient Temperature under Bias Junction Temperature under Bias Plastic b 55 C to a 125 C Free Air Ambient Temperature Military Commercial b 55 C to a 125 C 0 C to a 70 C Supply Voltage Military Commercial b 55 C to a 175 C b 55 C to a 150 C a 4.5V to a 5.5V a 4.5V to a 5.5V VCC Pin Potential to Ground Pin b 0.5V to a 7.0V b 0.5V to a 7.0V Input Voltage (Note 2) b 30 mA to a 5.0 mA Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC e 0V) b 0.5V to VCC Standard Output b 0.5V to a 5.5V TRI-STATEE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol 54F/74F Parameter Min VIH Input HIGH Voltage VIL Input LOW Voltage Typ Units VCC Conditions Max 2.0 V Recognized as a HIGH Signal 0.8 V Recognized as a LOW Signal b 1.2 V Min IIN e b18 mA V Min IOH e b1 mA IOH e b1 mA IOH e b1 mA IOL e 20 mA IOL e 20 mA VCD Input Clamp Diode Voltage VOH Output HIGH Voltage 54F 10% VCC 74F 10% VCC 74F 5% VCC VOL Output LOW Voltage 54F 10% VCC 74F 10% VCC 0.5 0.5 V Min IIH Input HIGH Current 54F 74F 20.0 5.0 mA Max VIN e 2.7V IBVI Input HIGH Current Breakdown Test 54F 74F 100 7.0 mA Max VIN e 7.0V ICEX Output HIGH Leakage Current 54F 74F 250 50 mA Max VOUT e VCC VID Input Leakage Test 74F V 0.0 IID e 1.9 mA All Other Pins Grounded IOD Output Leakage Circuit Current 74F 3.75 mA 0.0 VIOD e 150 mV All Other Pins Grounded IIL Input LOW Current IOS Output Short-Circuit Current ICC Power Supply Current 2.5 2.5 2.7 4.75 b 60 13.5 3 b 0.6 mA Max VIN e 0.5V b 150 mA Max VOUT e 0V 21.0 mA Max VO e HIGH AC Electrical Characteristics Symbol Parameter 74F 54F 74F TA e a 25 C VCC e a 5.0V CL e 50 pF TA, VCC e Mil CL e 50 pF TA, VCC e Com CL e 50 pF Units Min Typ Max Min Max Min Max tPLH tPHL Propagation Delay Sn to Z 4.0 3.2 6.2 5.2 9.0 7.5 3.5 3.0 11.5 8.0 3.5 3.2 9.5 7.5 ns tPLH tPHL Propagation Delay Sn to Z 4.5 4.0 7.5 6.2 10.5 9.0 4.5 4.0 13.5 9.5 4.5 4.0 12.0 9.0 ns tPLH tPHL Propagation Delay E to Z 3.0 3.0 4.7 4.4 6.1 6.0 3.0 2.5 7.5 6.5 3.0 2.5 7.0 6.0 ns tPLH tPHL Propagation Delay E to Z 5.0 3.5 7.0 5.3 9.5 7.0 4.0 3.0 12.0 8.0 4.0 3.0 10.5 7.5 ns tPLH tPHL Propagation Delay In to Z 3.0 1.5 4.8 2.5 6.5 4.0 2.5 1.5 7.5 6.0 3.0 1.5 7.0 5.0 ns tPLH tPHL Propagation Delay In to Z 3.0 3.7 4.8 5.5 6.5 7.0 2.5 3.5 8.5 9.0 2.5 3.7 7.5 7.5 ns Ordering Information 74F 151A S Temperature Range Family 74F e Commercial 54F e Military C X Special Variations QB e Military grade device with environmental and burn-in processing X e Devices shipped in 13x reel Device Type Package Code P e Plastic DIP D e Ceramic DIP F e Flatpak L e Leadless Chip Carrier (LCC) S e Small Outline SOIC JEDEC SJ e Small Outline SOIC EIAJ Temperature Range C e Commercial (0 C to a 70 C) M e Military (b55 C to a 125 C) 4 Physical Dimensions inches (millimeters) 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 16-Lead Ceramic Dual In-Line Package (D) NS Package Number J16A 5 Physical Dimensions inches (millimeters) (Continued) 16-Lead (0.150x Wide) Molded Small Outline Package, JEDEC (S) NS Package Number M16A 6 Physical Dimensions inches (millimeters) (Continued) 16-Lead (0.300x Wide) Molded Small Outline Package, EIAJ (SJ) NS Package Number M16D 16-Lead (0.300x Wide) Molded Dual In-Line Package (P) NS Package Number N16E 7 54F/74F151A 8-Input Multiplexer Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Flatpak (F) NS Package Number W16A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.