DESCO WEST: 3651 WALNUTAVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DATE:
February
2008
© 2008 DESCO INDUSTRIES INC.
Employee Owned
MATERIAL STA TFREE A™
DRAWING PM-95
STATFREEA™ CONDUCTIVE RUBBER, AIR CELL INTERLOCKING, .500"
Item #40915 CENTER SECTION Item #40920 END SECTION
Item #40910 STAND ALONE MAT
Includes 14234 ground kit
Black
Description:
Featuring an anti-fatigue, ergonomic air cell molded structure, this
design offers cushioning and insulation to reduce fatigue in standing
personnel. The interlocking feature allows the design of custom lengths
and the conductive rubber insures rapid charge drainage. Beveled
edges provide a gentle rise for safety and a finished appearance. When
interlocked, the sections of material maintain conductivity automatically.
This rubber mat resists damage from heat, abrasion, and common
solvents. In lengthy applications, the use of ground connection for every
5 mat sections is recommended.
Made in America
Limited Lifetime Warranty
Desco warrants for one year that Statfree® matting products will be
free of defects in materials and workmanship and will guarantee
dissipative/ conductive mat properties for the life of the mat.
Damage to matting caused by misuse of any kind, including using
inappropriate cleaners is not covered by Desco Limited Warranty.
RoHS Compliance Statement
None of the following materials are intentionally
added in manufacturing this product: lead, mercury,
cadmium, hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated diphenyl ethers
(PBDE) as outlined in the Directive 2002/95/EC
Article 4.1. See Desco Industries Inc. letter on-line at
Desco.com.
© 2006 DESCO INDUSTRIES INC.
Employee Owned
Electrical Properties:
Property Test Method Value
RTG Resistance: ANSI ESD S7.1 <10E6 Ohms
RTT Resistance: ANSI ESD S7.1 <10E6 Ohms
Electrical Properties obtained by testing to industrial standards by an
independent testing laboratory @ 10 Volts and 50% relative humidity
unless otherwise specified. Complete text of the test report is available
upon request.
Disclaimer:
All statements, technical data, and recommendations contained herein are
based upon tests we believe to be reliable. However, the accuracy or
completeness thereof is not guaranteed. The proper and correct applications
of products and data is the responsibility of the user. Statements or
recommendations not contained herein shall have no force or effect unless
embodied in a written agreement signed by authorized officers of Desco
Industries, Inc.
Specifications:
Construction: Molded homogeneous conductive rubber
Thickness: 0.50" Nominal (12.7mm)
Section Size: 28" x 36" nominal
Surface: Light texture embossing
Grounding: Mats must be properly grounded to
insure proper electrical performance. Ask
for Technical Bulletin TB-2000 for proper
grounding instructions.
Weight: 10 lbs. per section
Hardness: 65 Shore A
Color: Black
Cleaning: For optimum electrical performance,
surfaces must be cleaned regularly with a
mild detergent and water solution. We
suggest using Reztore™ Surface & Mat
Cleaner Item #10435 or Static-Wipes Item
#10600. Do not use cleaners with silicone.
Silicone build-up will create an insulative film
on the surface.
Per section 3 Definitions of Floor standard ESD
STM7.1-2001 "Conductive Flooring Material: A
floor material that has a resistance to ground of
less than 10E6 ohms."
