ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarized series Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2011/65/EU). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range -40 to +85C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 0.47 to 6800F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 5 minutes' application of rated voltage at 20C, leakage current is not more than 0.03CV or 3 (A), whichever is greater. Tangent of loss angle (tan ) For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C Rated voltage (V) 10 16 25 35 50 63 100 6.3 tan (MAX.) 0.24 0.22 0.20 0.16 0.14 0.12 0.10 0.26 Measurement frequency : 120Hz 6.3 4 10 Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C with the polarity inverted every 250 hours. Endurance Marking Radial Lead Type 35 2 4 50 2 4 Capacitance change tan Leakage current 63 2 3 100 2 3 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value 1 d 2 31 42 53 64 75 86 97 10 8 11 9 10 11 U V PU 1 VA P 41 7 A 04 M 7 D 0 D M DD P0.5 Configuration Configuration P0.5 d D+0.5 MAX D+0.5 MAX (6.3up) (6.3up) 25 2 5 Type numbering system (Example : 10V 47F) Sleeve (P.E.T.) Sleeve (P.E.T.) Pressure relief vent L+ 16 2 6 After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Pressure relief vent 10 3 8 Capacitance tolerancetolerance ( 20%) ( 20%) Capacitance Rated capacitance (47F) (47F) Rated capacitance Rated voltage Rated(10V) voltage (10V) MAX L+ MAX 15MIN 4MIN 15MIN Series name Series name 4MIN Type (mm) (L < 20) 1.5 (L < 20) 1.5D (L > (L > = 20) 2.0 = 20) 2.0 P d 86.3 10 8 12.5 5D 6.35 10 16 12.5 1816 2.0P 2.5 2.0 3.5 2.5 5.0 3.5 5.0 5.0 7.5 5.0 7.5 7.5 0.5d 0.5 0.5 0.6 0.5 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 (mm) 18 7.5 0.8 * Please refer to page 20 about the end seal configuration. Configuration Configuration D 5 Pb-free leadwire Pb-free leadwire D Pb-free PET sleeve Pb-free PET sleeve 5 6.3 6.3 8 * 10 8 * 10 12.5 to 1812.5 to 18 DD DD ED PD HD ED PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D Type ALUMINUM ELECTROLYTIC CAPACITORS VP series Dimensions V Cap. (F) Code 6.3 10 16 25 35 50 63 0J 1A 1C 1E 1V 1H 1J 100 2A 0.47 R47 5 x 11 11 5 x 11 14 1 010 5 x 11 17 5 x 11 21 2.2 2R2 5 x 11 25 6.3 x 11 34 3.3 3R3 5 x 11 27 5 x 11 28 6.3 x 11 39 4.7 4R7 6.3 x 11 47 10 100 22 220 33 330 5 x 11 47 470 5 x 11 100 101 6.3 x 11 220 221 330 470 5 x 11 34 5 x 11 34 6.3 x 11 34 6.3 x 11 52 6.3 x 11 57 5 x 11 42 5 x 11 42 5 x 11 43 5 x 11 57 6.3 x 11 65 6.3 x 11 73 5 x 11 57 64 5 x 11 64 5 x 11 70 6.3 x 11 80 8 x 11.5 76 5 x 11 76 6.3 x 11 95 6.3 x 11 95 8 x 11.5 125 6.3 x 11 125 8 x 11.5 160 215 10 x 12.5 275 10 x 16 305 12.5 x 20 8 x 11.5 8 x 11.5 160 10 x 16 8 x 11.5 89 8 x 11.5 100 8 x 11.5 105 120 10 x 12.5 150 230 10 x 20 95 135 10 x 12.5 135 12.5 x 20 220 10 x 16 180 12.5 x 20 240 265 12.5 x 20 320 16 x 25 425 410 12.5 x 25 480 16 x 25 575 18 x 35.5 720 215 331 8 x 11.5 265 10 x 16 345 10 x 16 375 12.5 x 20 450 12.5 x 20 505 16 x 25 650 16 x 31.5 655 471 10 x 12.5 370 10 x 16 410 10 x 20 485 12.5 x 20 540 12.5 x 25 655 16 x 31.5 835 18 x 35.5 965 1000 102 10 x 20 650 12.5 x 20 855 950 2200 222 12.5 x 25 1160 16 x 25 1280 16 x 31.5 1510 3300 332 1570 16 x 31.5 1690 18 x 35.5 1980 4700 472 16 x 31.5 2020 18 x 35.5 2160 6800 682 18 x 35.5 2600 16 x 25 16 x 25 71 10 x 16 8 x 11.5 720 12.5 x 25 8 x 11.5 16 x 31.5 1140 18 x 35.5 1620 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Cap.(F) 0.47 to 47 CAT.8100D