Datasheet Rev. GK1
Issued 2007/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Power PCB Relay RP II/1
1
SCHRACK
I1 pole 8 / 12 / 16 A, 1 C/O or 1 N/O contact
I4 kV / 8 mm coil-contact
IPinning 3.5 or 5 mm (8 / 12 A) and 5 mm (16 A)
IPCB-sockets
IRoHS compliant (Directive 2002 / 95 / EC)
as per product date code 0404
Applications
Power supplies, domestic appliances, heating control,
installation
Approvals
V
,
Z
Technical data of approved types on request
Contact data
Configuration 1 C/O contact or 1 N/O contact
Type of contact single contact
Rated current 8 A 12 A 16 A
Rated voltage / max.breaking voltage AC
250 Vac / 440 Vac
Maximum breaking capacity AC 2000 VA 3000 VA 4000 VA
Make current 16 A 20 A 25 A
Contact material AgNi 0.15 AgCdO AgCdO
Contact ratings
Type Load Operations Standard
RP410
12 A, 250 Vac, cosϕ=1, 1200/h, 40% duty cycle
1.1x105AC 1
RP410
9.1 A, 220 Vac, cosϕ=1, 360/h, 15% duty cycle
2x105AC 1
RP418 3.4 A ON, 0.42 A OFF, 220 Vac, cosϕ=0.6 >1.1x106
RP411 8 A, 250 Vac, cosϕ=1, 50% duty cycle 105AC 1
RP412 8 A, 250 Vac, cosϕ=1, 50% duty cycle 105AC 1
RP330
18.2 A, 250 Vac, cosϕ=1, 600/h, 15% duty cycle
1.1x105AC 1
RP330
96 A ON, 16 A OFF, 250 Vac, cosϕ=0.6, 450/h
> 3x104VDE 0630
Coil data
Nominal voltage 5...110 Vdc
Nominal coil power 500 mW
Operate category 2 / b
Coil versions, DC-coil
Coil Nominal Pull-in Release Maximum Coil Coil
code voltage voltage voltage voltage resistance current
Vdc Vdc Vdc Vdc cmA
005 5 3.5 0.5 9.0 54+10% 92.6
006 6 4.2 0.6 10.8 68+10% 88.2
012 12 8.4 1.2 21.6 270+10% 44.4
024 24 16.8 2.4 43.2 1100+15% 21.8
048 48 33.6 4.8 86.4 4400+15% 10.9
060 60 42.0 6.0 108.0 6540+15% 9.2
110 110 77.0 11.0 198.0 23100+15% 4.8
All figures are given for coil without preenergization, at ambient temperature +20°C
Other coil voltages on request
F0146-B
Datasheet Rev. GK1
Issued 2007/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Power PCB Relay RP II/1 (Continued)
2
SCHRACK
Insulation
Dielectric strength coil-contacts 4000 Vrms
open contact circuit 1000 Vrms
Clearance / creepage 8 / 8 mm
Insulation to IEC 61810-1
Voltage rating 250 V
Pollution degree 3
Overvoltage category III
Insulation to VDE 0110b (2/79)
Insulation category / reference voltage C / 250
Other data
RoHS - Directive 2002 / 95 / EC
compliant as per product date code 0404
Ambient temperature -40...+70 °C
Mechanical life 30x106operations
Max. switching rate at rated- / minimum load 10 min-1 / 1200 min-1
Operate- / release time typ. 8 / 2 ms
Bounce time N/O contact/N/C contact typ. 2 / 4 ms
Vibration resistance N/O contact/N/C contact >10 / 2 g, 30...300 Hz
Shock resistance (destruction) 100 g
Category of protection (IEC 61810) RT II - flux proof, RT III - wash tight
Relay weight 18 g
Packaging unit 20 / 500 pcs.
Accessories see accessories RT and RP
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions in mm
8 / 12 A, pinning 3.5 mm
1 C/O
1 N/O
8 / 12 A, pinning 5 mm
1 C/O
1 N/O
16 A, pinning 5 mm
1 C/O
1 N/O
Dimensions
Dimensions in mm
S0273-AA
S0163-BG S0163-BC
S0163-BD S0163-BF
S0163-BE
S0163-BH
S0163-CO
S0163-CP
S0163-CQ
Datasheet Rev. GK1
Issued 2007/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Power PCB Relay RP II/1 (Continued)
3
SCHRACK
