www.ittcannon.com 140
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482 Series I Connectors KPT/KPSE
How to Order - KPT - Solder Contact Connectors
How to Order - KPTB Thru-Bulkhead Receptacle Connectors
Solder
SERIES PREFIX
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
ALTERNATE INSERT POSITION
MODIFICATION CODE
CLASS CONTACT ARRANGEMENT
CONTACT STYLE
ALTERNATE INSERT POSITION
MODIFICATION CODE
SHELL SIZE
SERIES PREFIX MIL-C-26482 PREFIX
MS3119
KPTB
MS 3110 E 22 36- P Y
EKPT 00 **22 36- P Y
22 55 PS Y E 22 55 Y--
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
ALTERNATE INSERT POSITION
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE (pin & socket)
ALTERNATE INSERT POSITION
SHELL STYLE
SHELL STYLE (cont'd)
Crimp
• General purpose
KPT - ITT Cannon prefix
MS - MIL-C-26482 prefix
Cannon Designation
Consult factory for details
MS Designation
3110 - wall mounting receptacle
3111 - cable connecting plug
3112 - box mounting receptacle (Class E only)
3114 - jam nut receptacle
3116 - straight plug
3119 - thru-bulkhead receptacle (Class E only)
• General Purpose
• Double ended pin and socket contacts
• Contains KPT socket insert
• Nonremovable contacts
A - general duty (not MS approved)
B - general duty with strain relief without
grommet & ferrules (may be used for pot-
ting when strain relief is desired) (not MS
approved)
E - grommet seal except on 02 and 3112 (MS
specification)
F - grommet seal with strain relief (MS specifi-
cation)
J - water tight gland seal with strain relief for
jacketed cable (MS specification)
P - potted (MS specification)
8, 10, 12, 14, 16, 18, 20, 22, and 24
See contact arrangement page 149.
P - pin; S - socket
W, X, Y and Z. (Omit for normal.)
Omit first (0) of shell style indication when using
modifications code.
07 - clear chromate over cadmium
16 - twist-pull lanyard release coupler (appli
cable to plug only).
23 - grounding springs fingers (applicable to
plug only)
*
*
*
*
00 - wall mounting receptacle
01 - cable connecting plug
02 - box mounting receptacle (Class E only)
03 - wall mounting receptacle without grom-
met, ferrule and endbell
04 - cable connecting plug without grommet,
ferrule and endbell
05 - straight plug withoug grommet, ferrule,
and endbell
06 - straight plug
07 - jam nut receptacle (available in hermetic
version also)
08 - 90˚ angle plug
B - thru-bulkhead receptacle (Class E only)
• Closed-entry socket contacts
• Solder termination
KPT connectors are a series of general - purpose,
environment - resistant, miniature circular connec-
tors, qualified for use in industrial applications
calling for quick - disconnect connectors with fixed
contacts for solder termination.
These miniature circular connectors are grouped
into two series ranging from general purpose solder
pot connectors . . . to high performance, crimp con-
nectors . . . to connectors with high contact densi-
ty. This broad range provides the most complete
family of 26482 connectors available today. The
versatility of these connectors is proven by the
fulfillment of requuirements ranging from general
purpose to space environmental.
KPT connectors are a series of general - purpose,
miniature circular connectors, qualified for use in
military applications. Ther are also widely used in
industrial applications. The KPTB in a thru-bulkhead
version with double faced pin and socket insert
construction allowing mating from both ends. They
contain KPT socket inserts with feed-thru (pin/
socket) non-removable contacts.
The thru-bulkhead receptacle is provided for appli-
cations requiring the disconnnection of a power
source from either side of a panel. A typical
connector to be used if air leakage requirements
are critical.
In addition to the two basic series, connectors for
special applications are also available. They include
RFI filtering versions (with loss pass internal filter
pin contacts), hermetic connectors for high pres-
sure watertight requirements, and twist - on pull - off
couplers for MIL-C-26482 plugs.
This series is intermateable and intermountable
with all MIL-C-26482 connectors, whether solder
or crimp type and is available with many materials,
finishers and configurations.
www.ittcannon.com 141
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482 Series I Connectors KPT/KPSE
How to Order - KPSE Crimp Contact Connectors
KPSE High Performance Crimp Contact Connectors
KPSE
MS
ITT Cannon Number:
Environment -resistant
Voidless integrally molded insulator
Front-release, crimp snap-in contacts
Closed entry socket contacts
4 moisture seals for complete sealing
Contact clip protected in hard dieletric
Positive insert-to-shell mechanical retention
Consult factory for details
*
*
*
*
00 - wall mounting receptacle
01 - cable connecting plug
02 - box mounting receptacle (without wire
seals)
03 - wall mounting receptacle without ferrule
and endbell
04 - cable connector plug without ferrule and
endbell
05 - straight plug without ferrule and endbell
06 - straight plug
07 - jam nut receptacle
08 - 90˚ angle plug
- ITT Cannon prefix
- MIL-C-26482 prefix 3120 - wall mounting receptacle
3121 - cable connnecting plug
3122 - box mounting receptacle
3124 - jam nut receptacle
3126 - straight plug
SERIES PREFIX
SHELL STYLE
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNTE INSERT POSITION
MODIFICATION CODE
MS Desgination CONTACT ARRANGEMENT
CONTACT STYLE
ALTERNATE INSERT POSITION
MODIFICATION CODE
CLASS
MS 3120 E 18 32 P X-
18 32 P X **
-
00 E
KPSE
SHELL SIZE
STANDARD MIL-C-26482 HARDWARE mates with any connector designed to
MIL-C-26482.
are designed to MIL-C-39029 and can be crimped
is completely encased in a tough plastic wafer to
is achieved by combining four seals: shell,
with hard plastic wafer
protect the clip from damage.
peripheral, interfacial and wire seals.
SHELL SEAL is effected when the plug shell pushes against the sealing
ring in the receptacle when the connectors are mated.
PERIPHERAL SEAL around the edge of the pin insulator is designed so
that mating the connector puts tension on the seal and greatly reduces
compression set.
INTERFACIAL SEAL is achieved by the insulator faces meeting when the
plug and receptacle are mated.
WIRE SEAL is accomplished by a mulitiple ripple design, exceeding the
wire sealing requirements of MIL-C-26482.
firmly locked into a groove in the shell, in addition to a strong adhesive
bond between the insert and shell.
with the standard M22520/1 crimp tool.
CLOSED-ENTRY SOCKET CONTACTS eliminate damage from abuse by test
probes and help to correct any misaligned pins during engagement.
CONTACT INSERTION is accomplishted from the rear of the connector.
When the contact is fully inserted, the clip tines snap securely behind
the contact shoulder.
CONTACT EXTRACTION is accomplished with a front-inserted extraction
tool. Pressing the tool plunger pushes the contact out thru the rear of
the connnector.
CRIMP, SNAP-IN CONTACTS
CONTACT RETAINING CLIP
COMPLETE MOISTURE SEALING
POSITIVE INSERT-TO-SHELL MECHANICAL RETENTION
KPSE environment-resistant, miniature circular,
quick disconnect connectors, qualified to
MIL-C-26482, are designed for the exacting re-
quirements of today's electronic industry. The KPSE
features an insulator which is mechanically retained
in the shell by a positive, hard plastic-to-metal lock
retention augmented by a reliable adhesive bond.
Complete moisture sealing is achieved by four
seal; shell, peripheral, interfiacial and wire seals.
Crimp snap-in contacts are retained in clips that are
completely encased in a tough hard dieletric wafer,
thus protecting the clips tines from damage. Closed-
entry socket contacts facilitate positive mating.
The KPSE series is intermateable, intermountable
and interchangeable with all MIL-C-26482 connec-
tors, whether crimp or solder type, and is avialiable
with many materials, finishes and configurations.
A - general duty (not MS approved)
B - general duty with strain relief without
grommet & ferrules (not MS approved)
E - grommet seal (MSspecification)
F - grommet seal with strain relief (MS specifi-
cation)
J - gland seal with strain relief for jacketed
cable (not MS approved)
P - potted (MS specification)
10, 12, 14, 16, 18, 20, 22, and 24
See contact arrangements page 149.
P - pin
S - socket
W, X, Y and Z. (Omit for normal.)
Omit first (0) of shell style indication when using
modifications code.
F0 - less contacts, not marked on connectors
07 - clear chromate over cadmium
16 - twist-pull lanyard release coupler (appli
cable to plug only).
23 - grounding springs fingers (applicable to
plug only)
www.ittcannon.com 142
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Performance and Material Specifications
Shell aluminum alloy, conductive
olive drab chromate over
cadmium finish per QQ-P-416
Shell Sizes
Shell Sizes
Service Classes A - general duty
B - general duty with strain relief
E - grommet seal
F - grommet seal with strain relief
J - gland nut with strain relief for jacketed cable
P - potted
Contact Termination
Number of contacts
Wire size, AWG
Wire Range Accommodations Insulation O.D. Limits
Contact
Size AWG Wire Size Min. KPT Min.
KPSE Max. KPT/
KPSE
Contact
Rating Contact
Size Rated
Amps Test
Current Millivolt Drop
Service
Rating Test Volt Service AC(rms) DC
Maximum
Operating
Voltage Sea level
Sea level
70,000 ft.
20
16
12
solder (KPT)
KPT 2 thru 61
KPT 12 thru 24
crimp snap-in (KPSE)
KPSE 3 thru 61
KPSE 16 thru 24
24, 22 and 20
20, 18 and 16
14 and 12
.060 (1.52)
.066 (1.68)
.097 (2.46)
.047 (1.19)
.066 (1.68)
.083 (2.11)
.109 (2.77)
.142 (3.61)
20
16
7.5
22.0
7.5
13.0
less than 55
less than 50
1
2
1
2
1
2
600
1000
850
1275
1500
2300
375
550
2100
3200
535
770
Polarization/Coupling: five keyway/three point bayonet
00 - wall mounting receptacle
01 - cable connecting plug
02 - box mounting receptacle
06 - straight plut
07 - jam nut receptacle
08 - 90˚ angle plug
B - thru-bulkhead receptacle
(KPT only)
KPT 8 thru 24
KPSE 10 thru 24
polychloroprene
polychloroprene
Copper alloy, gold plate
per MIL-G-45204 type II
- 55˚C to +125˚C
Insulator
Grommet and Seal
Contacts
Temperature Range
STANDARD MATERIALS AND FINISHES
ELECTRICAL
MECHANICAL
www.ittcannon.com 143
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Wall Mounting Receptacles
Receptacles with Termination Assemblies
SEE TERMINATION
ASSEMBLY SEE TERMINATION
ASSEMBLY
MM
K
K
SOLDER
KPT00/MS3110
Shell
Size A
+_ .003 (+_.08) K
+_ .016 (+_.41) T
-_ .005 (+_.13) Q Thread
Class 2A
M
+ .031 (+.79)
-.000 (-.00) R*
(TP) S
Max.
CRIMP
KPSE00/MS3120 RECEPTACLE ASSEMBLY
A
DIA.
8
10
12
14
16
18
20
22
24
Shell
Size DA
Min. LA
Max. V Thread
Class 2A GBF
Min. HBF
Max. LBF
Max. BE
Max. LE
Max.
TYPE A
TYPE J TYPE P
TYPE B and F TYPE E
†8
10
12
14
16
18
20
22
24
Shell
Size
Performance Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page
154
Contact Arrangements - Page 149
DJ
Max./Min. HJ
Max. LJ
Max. BP
Max. DP
Min. LP
Max.
†8
10
12
14
16
18
20
22
24
.230/.168 (5.84/4.27)
.312/.205 (7.92/5.21)
.442/.338 (11.23/8.59)
.539/.416 (13.56/10.57)
.616/.550 (15.65/13.97)
.672/.600 (17.07/15.24)
.747/.634 (18.97/16.13)
.846/.670 (21.49/17.02)
.894/.740 (22.71/18.80)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
2.271 (57.68)
2.271 (57.68)
2.411 (61.24)
2.599 (66.01)
2.943 (74.75)
3.172 (80.57)
3.610 (91.69)
3.766 (95.66)
3.985 (101.22)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
.317 (8.05)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.149 (29.18)
1.274 (32.36)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.672 (42.47)
1.672 (42.47)
1.734 (44.04)
.335 (8.15)
.466 (11.84)
.591 (15.01)
.705 (19.05)
.830 (21.08)
.948 (24.08)
1.043 (26.49)
1.198 (30.43)
1.293 (32.84)
1.44 (36.68)
1.44 (36.68)
1.444 (36.68)
1.444 (36.68)
1.444 (36.68)
1.444 (36.68)
1.728 (43.89)
1.728 (43.89)
1.738 (44.15)
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
.115 (2.92)
.178 (4.52)
.302 (7.67)
.365 (9.27)
.490 (12.45)
.615 (15.62)
.615 (15.62)
.740 (18.80)
.790 (20.07)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
1.922 (48.82)
1.922 (48.82)
1.922 (48.82)
1.922 (48.82)
2.047 (51.99)
2.078 (52.78)
2.344 (59.54)
1.344 (59.54)
2.406 (61.11)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.531 (38.89)
1.531 (38.89)
1.594 (40.49)
Not available in KPSE *(TP) located within .010 T.P. with respect to diameter A and master keyway.
†Not available in KPSE
LAV THD
DA
TYPE A TYPE B AND F TYPE E TYPE J TYPE P
.395
(10.03)
MIN.
LBF
GBF HBF
LELJLP
BPDP
DJHJ
BE
.471 (11.96)
.588 (14.96)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.556 (14.12)
.556 (14.12)
.589 (14.96)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
A
DIA.
Q THD. Q THD.
POLARIZING
GROOVE T DIA.
4 MTG.
HOLES
R (TP)
S.140 RAD.
MAX.
GROMMET FOR
TYPES A, B, J & P
GROMMET
FOR
TYPES
E & F
MS3110 (MS service class E, F, J, P)
MS3120 (MS service class E, F, P) KPT00
KPSE00
www.ittcannon.com 144
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Cable Connecting Plugs
Cable Connecting Plugs With Termination Assemblies
SEE TERMINATION
ASSEMBLY
SEE TERMINATION
ASSEMBLY
P
P
H
H
SOLDER
KPT01/MS3111
Shell
Size A
+_ .003 (+_.08) H
+_ .016 (+_.41) Q Thread
Class 2A
P
+ .031 (+.79)
-.000 (-.00) S
Max. Y
Max.
CRIMP
KPSE01/MS3121 PLUG ASSEMBLY
A
DIA.
†8
10
12
14
16
18
20
22
24
Shell
Size DA
Min. LA
Max. V Thread
Class 2A GBF
Min. HBF
Max. LBF
Max. BE
Max. LE
Max.
TYPE A
With Termination Assemblies
TYPE J TYPE P
TYPE B and F TYPE E
†8
10
12
14
16
18
20
22
24
Shell
Size
Performance Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page
154
Contact Arrangements - Page 149
DJ
Max./Min. HJ
Max. LJ
Max. BP
Max. DP
Min. LP
Max.
†8
10
12
14
16
18
20
22
24
.230/.168 (5.84/4.27)
.312/.205 (7.92/5.21)
.442/.338 (11.23/8.59)
.539/.416 (13.56/10.57)
.616/.550 (15.65/13.97)
.672/.600 (17.07/15.24)
.747/.634 (18.97/16.13)
.846/.670 (21.49/17.02)
.894/.740 (22.71/18.80)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
2.271 (57.68)
2.271 (57.68)
2.411 (61.24)
2.599 (66.01)
2.943 (74.75)
3.172 (80.57)
3.610 (91.69)
3.766 (95.66)
3.985 (101.22)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
.317 (8.05)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.149 (29.18)
1.274 (32.36)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.453 (36.91)
1.672 (42.47)
1.672 (42.47)
1.734 (44.04)
.335 (8.15)
.466 (11.84)
.591 (15.01)
.705 (19.05)
.830 (21.08)
.948 (24.08)
1.043 (26.49)
1.198 (30.43)
1.293 (32.84)
1.44 (36.68)
1.44 (36.68)
1.44 (36.68)
1.44 (36.68)
1.44 (36.68)
1.44 (36.68)
1.728 (43.89)
1.728 (43.89)
1.738 (44.15)
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
.115 (2.92)
.178 (4.52)
.302 (7.67)
.365 (9.27)
.490 (12.45)
.615 (15.62)
.615 (15.62)
.740 (18.80)
.790 (20.07)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
1.922 (48.82)
1.922 (48.82)
1.922 (48.82)
1.922 (48.82)
2.047 (51.99)
2.078 (52.78)
2.344 (59.54)
1.344 (59.54)
2.406 (61.11)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.531 (38.89)
1.531 (38.89)
1.594 (40.49)
†Not available in KPSE *(TP) located within .010T.P. with respect to diameters A and master keyway.
†Not available in KPSE
LAV THD
DA
TYPE A TYPE B AND F TYPE E TYPE J TYPE P
.395
(10.03)
MIN.
LBF
GBF HBF
LELJLP
BPDP
DJHJ
BE
.471 (11.96)
.588 (14.94)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.115 (2.92)
.115 (2.92)
.115 (2.92)
.400 (10.16)
.400 (10.16)
.400 (10.16)
.400 (10.16)
.400 (10.16)
.400 (10.16)
.535 (13.59)
.535 (13.59)
.558 (14.43)
.958 (24.33)
1.082 (27.48)
1.176 (29.87)
1.270 (32.26)
1.364 (34.65)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
A
DIA.
Q THD. Q THD.
GROMMET FOR
TYPES A, B, J & P GROMMET FOR
TYPES E & F
Y DIA. POLARIZING
GROOVE
S
MS3111
(MS service class E, F, J, P)
MS3121
(MS service clase E, F, P)
KPT01
KPSE01
www.ittcannon.com 145
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Box Mounting Receptacles
Thru-Bulkhead Receptacles
Shell
Size A
+_ .003 (+_.08) K
+_ .016 (+_.41) T
+_ .005 Z
Max.
B
Max L
Max.
M
+ .031 (+.79)
-.000 (-.00)
M
+ .031 (+.79)
-.000 (-.00)
N
Dia.
Max. S
Max.
R*
(TP)
RECEPTACLE
ASSEMBLY
SOLDER
KPT02/MS3112 CRIMP
KPSE02/MS3122
†8
10
12
14
16
18
20
22
24
Performance Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page
154
Contact Arrangements - Page 149
†Not available in KPSE *(TP) located within .010T.P. with respect to diameter A and master keyway.
*(T.P) located within .010 T.P. with respect to diameter A and master keyway.
.471 (11.96)
.588 (14.96)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
Shell
Size A Dia.
+_ .003 (+_.08)
†8
10
12
14
16
18
20
22
24
.471 (11.96)
.588 (14.94)
.748 (18.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.978 (12.14)
.978 (12.14)
.978 (12.14)
.978 (12.14)
.978 (12.14)
.978 (12.14)
1.196 (30.38)
1.196 (30.38)
1.196 (30.98)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
1.320 (33.07)
1.320 (33.07)
1.320 (33.07)
1.320 (33.07)
1.320 (33.07)
1.320 (33.07)
1.367 (34.72)
1.367 (34.72)
1.418 (36.02)
.469 (11.91)
.593 (15.06)
.719 (18.26)
.843 (21.41)
.969 (24.61)
1.093 (27.76)
1.219 (30.96)
1.343 (34.11)
1.469 (37.31)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.354 (8.99)
.354 (8.99)
.354 (8.99)
.354 (8.99)
.354 (8.99)
.354 (8.99)
.417 (10.59)
.417 (10.59)
.445 (11.30)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.431 (10.95)
.556 (14.12)
.556 (14.12)
.589 (14.96)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
K
+_ .016 (+_.406) L
Max. T
+_ .005 (+_ .127)
S
Max.
R*
(TP)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.76)
1.375 (34.92)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.688 (17.48)
.688 (17.48)
.688 (17.48)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.406 (35.71)
1.406 (35.71)
1.406 (35.71)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
POLARIZING
GROOVE
BL
M
K
M
A
DIA. A
DIA.
N DIA. N DIA.
K
Note: Connector does not accommodate backshell.
Z
T DIA.
4 MTG.
HOLES
.140 RAD.
MAX.
S
R (TP)
PIN
SIDE
A
M K
SKT
SIDE
A
L
T DIA.
4 MTG. HOLES
POLARIZING
GROOVE
.140 RAD.
MAX. S TYP
R (TP)
MS3112
(MS service class E)
MS3122
(MS service class E)
KPT02
KPSE02
MS3119
(MS service class E) KPTB
www.ittcannon.com 146
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Straight Plugs
Straight Plugs With Termination Assemblies
SOLDER
KPT06/MS3116
Shell
Size J
-_ .010 (+_0.25) Q Thread
Class 2A
G
Max.
A dia.
Max.
CRIMP
KPSE06/MS3126
†8
10
12
14
16
18
20
22
24
.765 (19.43)
.840 (21.34)
.999 (25.38)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
.782 (19.86)
.926 (23.52)
1.043 (26.49)
1.183 (30.05)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.06)
1.77 (45.14)
.353 (8.99)
.353 (8.99)
.353 (8.99)
.353 (8.99)
.353 (8.99)
.353 (8.99)
.415 (10.54)
.415 (10.54)
.415 (10.54)
Shell
Size DA
Min.
LA
Max. V Thread
Class 2A GBF
Min.
HBF
Max. BE
Max. LE
Max.
TYPE A
TYPE J TYPE P
TYPE B and F TYPE E
†8
10
12
14
16
18
20
22
24
Shell
Size
Performance Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page
154
Contact Arrangements - Page 149
DJ
Max./Min.
HJ
Max.
LJ
Max. BP
Max.
DP
Min.
LP
Max.
†8
10
12
14
16
18
20
22
24
.230/.168 (5.84/4.27)
.312/.205 (7.92/5.21)
.442/.338 (11.23/8.59)
.539/.416 (13.56/10.57)
.616/.550 (15.65/13.97)
.672/.600 (17.07/15.24)
.747/.634 (18.97/16.13)
.846/.670 (21.49/17.02)
.894/.740 (22.71/18.80)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
2.271 (57.68)
2.271 (57.68)
2.411 (61.24)
2.599 (66.01)
2.943 (74.75)
3.172 (80.57)
3.610 (91.69)
3.766 (95.66)
3.985 (101.22)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
.317 (8.05)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.149 (29.18)
1.274 (32.36)
1.500 (38.10)
1.500 (38.10)
1.500 (38.10)
1.500 (38.10)
1.500 (38.10)
1.500 (38.10)
1.609 (40.87)
1.609 (40.87)
1.687 (42.85)
.335 (8.51)
.466 (11.84)
.591 (15.01)
.705 (19.05)
.830 (21.08)
.948 (24.08)
1.043 (26.49)
1.198 (30.43)
1.293 (32.84)
1.440 (36.58)
1.440 (36.58)
1.440 (36.58)
1.440 (36.58)
1.440 (36.58)
1.662 (42.21)
1.662 (42.21)
1.662 (42.21)
1.672 (42.47)
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
.115 (2.02)
.178 (4.52)
.302 (7.67)
.365 (9.27)
.490 (12.45)
.615 (15.62)
.615 (15.62)
.740 (18.80)
.790 (20.07)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
LBF
Max.
1.906 (48.41)
1.906 (48.41)
1.906 (48.41)
1.906 (48.41)
2.047 (51.99)
2.078 (52.78)
2.250 (57.15)
2.250 (57.15)
2.312 (58.72)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.328 (33.73)
1.453 (36.91)
1.453 (36.91)
1.510 (38.54)
†Not available in KPSE
†Not available in KPSE
LAV THD
DA
TYPE A TYPE B AND F TYPE E TYPE J TYPE P
.395
(10.03)
MIN.
LBF
GBF HBF
LELJLP
BPDP
DJHJ
BE
Q THD Q THD
SEE TERMINATION
ASSEMBLY
G
A
DIA. A
DIA.
POLARIZING
GROOVE
GROMMET FOR
TYPES A, B, J & P
GROMMET FOR
TYPES E & F
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
MS3116
(MS service class E, F, J, P)
MS3126
(MS service class E, F, P)
KPT06
KPSE06
www.ittcannon.com 147
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Jam Nut Receptacles
Jam Nut Receptacles With Termination Assemblies
SOLDER
KPT07/MS3114
Shell
Size K
+_.020 (+_.05)
M
+.031 (+.08)
-.000 (-.00)
A
+_.003 (+_0.08) H
+_.017 (+_0.43)
A
+_.005 (0.130) N
Max. S
Max. R thread
Class 2A
Min. Max.
T
Panel Thickness
CRIMP
KPSE07/MS3124
†8
10
12
14
16
18
20
22
24
.471 (11.96)
.588 (14.93)
.748 (19.00)
.873 (22.17)
.988 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.525 (13.34)
.650 (16.51)
.813 (20.65)
.937 (23.80)
1.061 (26.95)
1.186 (30.12)
1.311 (33.30)
1.436 (36.47)
1.561 (39.65)
.750 (19.05)
.875 (22.22)
1.062 (26.97)
1.188 (30.17)
1.312 (33.32)
1.438 (36.25)
1.562 (39.67)
1.688 (42.87)
1.812 (46.02)
.117 (2.97)
.117 (2.97)
.117 (2.97)
.117 (2.97)
.117 (2.97)
.117 (2.97)
.148 (3.76)
.148 (3.76)
.148 (3.76)
.691 (17.55)
.691 (17.55)
.691 (17.55)
.691 (17.55)
.691 (17.55)
.691 (17.55)
.879 (22.33)
.879 (22.33)
.912 (23.16)
1.078 (27.38)
1.206 (30.56)
1.319 (35.33)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.954 (49.63)
2.078 (52.78)
2.203 (55.96)
.954 (24.23)
1.078 (27.38
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.41 (41.68)
1.828 (46.43)
1.954 (49.63)
2.078 (52.78)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.250 (6.35)
.250 (6.35)
.250 (6.35)
9/16-24UNEF
11/16-24UNEF
7/8-20UNEF
1-20UNEF
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-5/8-18UNEF
Shell
Size Z
Max. GBF
Min.
HBF
Max. BE
Max. LE
Max.
TYPE PTYPE ETYPE B AND FTYPE A
†8
10
12
14
16
18
20
22
24
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
1.93 (4.90)
1.93 (4.90)
.150 (3.81)
Performacne Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page 154
Contact Arrangements - Page 149
BP
Max. DP
Min. LP
Max.
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
.317 (8.05)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.149 (29.18)
1.274 (32.36)
1.391 (35.33)
1.391 (35.33)
1.391 (35.33)
1.391 (35.33)
1.391 (35.33)
1.391 (35.33)
1.641 (41.68)
1.641 (41.68)
1.703 (43.26)
.115 (2.02)
.178 (4.52)
.302 (7.67)
.365 (9.27)
.490 (12.45)
.615 (15.62)
.615 (15.62)
.740 (18.80)
.790 (20.07)
.828 (21.03)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
LBF
Max.
1.906 (48.41)
1.906 (48.41)
1.906 (48.41)
1.906 (48.41)
2.047 (51.99)
2.078 (52.78)
2.328 (59.13)
2.328 (59.13)
2.453 (62.31)
.608 (15.44)
.734 (18.64)
.858 (21.79)
.984 (24.99)
1.110 (28.19)
1.234 (31.34)
1.360 (34.54)
1.484 (37.69)
1.610 (40.89)
1.344 (34.14)
1.344 (34.14)
1.344 (34.14)
1.344 (34.14)
1.344 (34.14)
1.344 (34.14)
1.594 (40.49)
1.594 (40.49)
1.641 (41.68)
†Not available in KPSE
R THD. R THD.
TT
Q THD N DIA.
KK
MM GROMMET FOR
TYPE E & F
GROMMET FOR
TYPE A, B, & P
A
DIA.
A
DIA.
F
MTG.
FLAT
H
S
TYPE A
(No Term. Assy.)
Z
LBF
GBF HBF
LE
BE
LP
DPBP
MS3114
(MS service class E, F, P)
MS3124
(MS service class E, F, P)
KPT07
KPSE07
www.ittcannon.com 148
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Right Angle Plugs
Right Angle Plugs With Termination Assemblies
Shell
Size A Dia.
Max. G
Max. Q Thread
Class 2A
KPT/KPSE
†8
10
12
14
16
18
20
22
24
Shell
Size LAE
Max. DAE
Max. V Thread
Class 2A V Thread
Class 2A V Thread
Class 2A
DBF
Max. LBF
Max. L
Max. AP
Max. LP
Max. CP
Min.
TYPE A AND E TYPE B AND F TYPE P
†8
10
12
14
16
18
20
22
24
1.421 (36.09)
1.484 (37.69)
1.546 (39.27)
1.577 (40.05)
1.609 (40.87)
1.734 (44.04)
1.879 (47.73)
2.035 (51.69)
2.035 (51.69)
.822 (20.88)
.853 (21.67)
.916 (23.27)
.978 (24.84)
1.041 (26.44)
1.103 (28.70)
1.166 (29.62)
1.245 (31.62)
1.322 (33.58)
1/2-28UNEF
5/8-28UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
1/2-28UNEF
5/8-28UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
1/2-28UNEF
5/8-28UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
1.238 (31.44)
1.269 (32.24)
1.395 (35.43)
1.519 (38.58)
1.582 (40.18)
1.644 (41.76)
1.707 (43.36)
1.884 (47.85)
1.963 (49.86)
1.421 (36.09)
1.484 (37.69)
1.546 (39.27)
1.577 (40.05)
1.609 (40.87)
1.734 (44.04)
1.879 (47.73)
2.035 (51.69)
2.035 (51.69)
1.842 (46.79)
1.937 (49.20)
1.937 (49.20)
2.124 (53.95)
2.203 (55.96)
2.380 (60.45)
2.629 (66.78)
2.629 (66.78)
2.895 (73.53)
-(-)
1.030 (26.16)
1.030 (26.16)
1.030 (26.16)
1.280 (32.51)
1.280 (32.51)
1.530 (38.86)
1.530 (38.86)
1.780 (45.21)
-(-)
1.380 (35.05)
1.567 (39.80)
1.567 (39.80)
1.567 (39.80)
1.755 (44.58)
1.782 (45.26)
1.782 (45.26)
2.087 (53.01)
-(-)
.252 (6.40)
.252 (6.40)
.283 (7.19)
.355 (9.02)
.530 (13.46)
.562 (14.27)
.562 (14.27)
.610 (15.49)
†Not available in KPSE.
NOTE: for size 10 and 24 consult factory for availability in type A, B, E and F,
For size 8 consult factory for availablitiy in Type P.
†Not available in KPSE. NOTE: For size 10 and 24 consult factory for availability in type A, B, E and F, For size 8 consult factory for availablitiy in Type P.
.765 (19.43)
.840 (21.34)
.999 (25.38)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
.782 (19.86)
.926 (23.52)
1.043 (26.49)
1.183 (30.05)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.09)
1.777 (45.13)
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
A
DIA. A
DIA.
G
DAE
LBF
DBF AP
CP
LP
L MAX.
LAE V THD.
Q THD
H D
Q THD
POLARIZING
BOSS GROMMET FOR
TYPES E & F
GROMMET FOR
TYPES A, B, J & P
Performance Specifications - Page 142
Contacts, Sealing Plugs, Assembly Tools - Page 154
Contact Arrangements - Page 149
KPT08/KPSE08
Solder KPT08 Crimp KPSE08
B A A
CBB
A D
CC
C
C
C
C
EC
C
C
C
CCC
CCC
C
C
BBBBBBB
B
AAAAAA
A
A
L
LL
LLL
L
K
K
KKKK
K
J
JJJJJ
J
H
H
H
HHHH
H
GG
G
GGGG
G
SS
SSS
S
T
T
Y
Y
YY
X
X
X
X
WWW
W
Z
Z
Z
Z
Ta b
ca
bcde
TT
T
VV
VV
V
MMM
MMM
NN
N
NNN
UUU
UU
U
PP
PPPP
DD D DDD
D
D
RR
RRRR
EE
EEEE
E
E
FF
F
FFF
F
C
C
C
C
C
C
CC
CCCC
B
B
B
B
B
B
BBBBBB
A
A
A
A
A
A
AAAAA A
AA BBCC
DD
EE
FF HH
GG
L
L
L
L
L
L
L
L
LLLL
K
K
K
K
K
K
K
K
KK
KK
J
J
J
J
J
J
J
J
JJ
J
J
H
H
H
H
H
H
HHHH
H
H
G
G
G
G
G
G
GG
GG
G
G
S
S
S
S
S
S
SS
SS
S
S
Y
Y
Y
Y
Y
YYY
Y
Y
X
X
X
X
X
X
X
XX
XX
U
U
U
U
U
U U
UU
U
U
W
W
W
W
W
W
W
W
W
WW
Z
Z
Z
Z
Z
Z
ZZ
Z
Z
a
a
a
a
a
aa
a
a
ab
b
b
b
b
bb
b
b
c
c
c
c
c
c
c
c
c
d
d
d
d
d
d
dd
d
e
e
e
e
e
e
e
e
e
f
f
f
f
h
h
h
hh
i
i
iii
jj
jl
l
m
mm
n
n
n
p
p
q
q
r
r
ss
t
u
v
w
x
y
z
k
k
kk
f
f
f
ff
g
g
g
g
gg
g
gg
h
h
h
i
i
i
j
jk
k
l
m
m
n
n
q
qr
rs
p
p
T
T
T
T
T
T
T
TT
T
T
V
V
V
V
V
V
V
VVV
V
M
M
M
M
M
M
M
M
MM
M
M
N
N
N
N
N
N
NN
NN
N
N
P
P
P
P
P
P
PP
PP
P
P
D
D
D
D
D
D
D
D
DD
D
D
R
R
R
R
R
R
RR
RR
R
R
E
E
E
E
E
E
E
E
EE
EE
F
F
F
F
F
F
FF
FF
F
F
C
C
B
B
A
A
AA
AA BB
BB CC
CC
DD
DD
EE
EE FF
FF
HH
HH
NN JJ
JJ KK
KK
LL
LL MM PP
GG
GG
L
LK
KJ
J
H
H
G
G
S
S
Y
YX
X
U
U
W
W
Z
Za
ab
bc
cd
d
e
e
h
hi
ij
m
mn
np
p
q
qr
rs
st
tu
uv
vw
wx
x
y
yz
z
k
k
f
fg
gT
T
V
V
M
MN
NPP
D
D
R
R
E
EF
F
F
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
L
L
M
MN
R
K
KJ
J
P
H
H
KJ
H
H
G
G
G
G
F
F
F
F
E
E
E
ED
D
D
D
D
F
FE
ED
D
AB
www.ittcannon.com 149
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Contact Arrangements
LEGEND
Shell Size 8
Shell Size 10 Shell Size 12 Shell Size 14
Shell Size 18Shell Size 16
Shell Size 20
Shell Size 22
Shell Size 24
KPT Drawing not to scale; face view of pin insert shown (socket view is opposite)
8-2
2-#20
I
8-3
3-#20
I
8-4
4-#20
I
8-33
3-#20
I
14-15
14-#20 1-#16
I
14-12
8-#20 4-#16
I
14-5
5-#16
II
12-10
10-#20
I
12-8
8-#20
I
12-3
3-#16
II
10-98
6-#20
I
10-6
6-#20
I
14-18
18-#20
I
18-30
29-#20 1-#16
I
18-32
32-#20
I
20-16
16-#16
II
20-24
24-#20
I
20-39
37-#20 2-#16
I
20-41
41-#20
I
22-55
55-#20
I
22-41
27-#20 14-#16
II
22-36
36-#20
I
22-34
34-#20
I
22-32
32-#20
I
22-21
21-#16
II
24A57
55-#20 2-#12
I
24-61
61-#20
I
14-19
19-#20
I
16-23
22-#20 1-#16
I
16-99
21-#20 2-#16
I
16-8
8-#16
II
16-26
26-#20
I
18-11
11-#16
II
18A28
26-#20 2-#16
I
KPSE
Authorized per MIL-C-26482 (NAVY)
Not MS approved ITTC proprietary
Shell Size
No. of Contacts
Service Rating
Shell Size
No. of Contacts
Service Rating
Shell Size
No. of Contacts
Service Rating
Shell Size
No. of Contacts
Service Rating
Shell Size
No. of Contacts
Service Rating
Shell Size
No. of Contacts
Service Rating
(See page 150 for Alternate Insert Positions.)
www.ittcannon.com 150
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Alternate Insert Positions
Face view of pin inserts
N
Z˚
Y˚
28
8
8
12
8
14
10
10
12
16
12
18
14
14
20
14
14
22
16
16
20
16
18
18
18
22
22
22
20
20
22
22
24
24
8-2
8-3
8-33
12-3
8-4
14-5
10-6
10-98
12-8
16-8
12-10
18-11
14-12
14-15
20-16
14-18
14-19
22-21
16-23
16-99
20-24
16-26
18A28
18-30
18-32
22-32
22-34
22-36
20-39
20-41
22-41
22-55
24A57
24-61
58
60
90
-
45
40
90
90
90
54
60
62
43
17
238
15
30
16
158
66
70
60
-
180
85
72
62
72
63
45
39
30
90
90
122
210
-
-
-
92
-
180
112
152
155
119
90
110
318
90
165
135
270
156
145
-
-
193
138
145
142
144
144
126
135
142
180
180
-
-
-
180
-
184
-
240
203
180
270
241
-
155
333
180
315
175
-
223
215
275
-
285
222
215
218
216
252
225
264
226
270
270
-
-
-
-
-
273
-
270
292
331
295
340
-
234
347
270
-
349
-
340
290
338
-
350
265
288
298
288
333
-
-
314
324
324
4
5
3
6
8
10
11
12
15
16
18
19
21
23
32
34
36
39
41
Numbers in bold face indicate contact arrangements are not to MIL-C-26482.
55
57
61
24
26
28
30
X˚
W˚
NO. OF
CONTACTS SHELL
SIZE ARR.
NO. Degrees of Rotation
The five positions (W, X, Y, Z and Normal) differ in
degree of rotation for various sizes and arrange-
ments.
W X Y Z
www.ittcannon.com 151
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Panel Cutouts
Panel Thickness
Box and Wall Mounting Receptacle
P+_.005 (013)
4 HOLES
+.010 (0.25)
-.000 (0.00)
+.010 (0.25)
-.000 (0.00)
+.000 (0.00)
-.010 (0.25)
R
(T.P.)
Shell
Size
FLANGE (FRONT MOUNTING)
KPT/KPSE MOUNTING HOLE DIA.
KPT/KPSE
A Dia. R P +_.005 Screw
†8
10
12
14
16
18
20
22
24
Shell
Size A B
KPT/KPSE
†8
10
12
14
16
18
20
22
24
Size B
Max
.087
(2.21)
.212
(5.38)
8
10
12
14
16
18
20
22
24
Size
B
Max
panel
and
screw
head
.218
(5.54)
.334
(8.74)
.311
(7.90)
8
10
12
14
16
18
20
22
24
†Not Available in KPSE connectors.
†Not Available in KPSE connectors.
.578 (14.68)
.703 (17.86)
.890 (22.61)
1.015 (25.78)
1.140 (28.96)
1.265 (32.13)
1.390 (35.31)
1.515 (38.48)
1.640 (41.66)
.540 (13.72)
.665 (16.89)
.828 (21.02)
.952 (24.18)
1.076 (27.33)
1.201 (30.51)
1.326 (33.68)
1.451 (36.86)
1.576 (40.03)
.618 (15.70)
.735 (18.67)
.859 (21.82)
.985 (25.02)
1.113 (28.27)
1.235 (31.37)
1.361 (34.57)
1.485 (37.72)
1.611 (40.92)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.125 (3.17)
.155 (3.94)
#4
#4
#4
#4
#4
#4
#4
#4
#6
A
A
B
BB
BB
PANEL
PANEL
PANEL
PANEL
FRONT PANEL
MTG REF
FRONT
PANEL
MTG REF
REAR PANEL
MTG REF
REAR
PANEL
MTG REF
Jam Nut Receptacle
Wall Mounting and
Box Mounting Receptacle Thru-Bulkhead Receptacle
Maximum panel thickness dimensions allowable to
ensure complete connector operation for the Wall
Mounting Receptacle, Box Mounting Receptacle,
and Thru-Bulkhead Receptacle.
www.ittcannon.com 152
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Dummy Receptacles
Protective Caps
How To Order KPT 15 12A *-
KPT 80 C * 80 - cap for plugs
.047
(1.19)
Max.
.169 (4.29)
+_.008 (.20)
.094
(2.39)
Max.
R
Q
N
L
F A
MH+.500 (12.7)
-.250 (6.35)
CHAIN LENGTH H+.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
H+.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
81 - cap for receptacle
NOTE: For MS Version and additional finishes see PV catalog.
EF
G DIA
4 HOLES
.140 RAD.
MAX.
A
DIA.
JK
Shell
Size A
+_ .003 (.08) G
+_ .005 (.13) K
+_ .016 (.41)
J
+.031 (.79)
-.000 (.00)
E
Basic F
Max.
8
10
12
14
16
18
20
22
24
.471 (11.96)
.588 (14.94)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
Shell
Size A
+_ .003 (.08) F
Max. L
Max. N
Min. Q
Max. R
Max.
M
+0.31 (.79)
-.000 (.00)
H
8
10
12
14
16
18
20
22
24
.471 (11.96)
.588 (14.94)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.719 (18.26)
.844 (21.44)
1.000 (25.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
3.000 (76.20)
3.000 (76.20)
3.500 (88.90)
3.500 (88.90)
3.500 (88.90)
3.500 (88.90)
4.000 (101.60)
4.000 (101.60)
4.000 (101.60)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.625 (15.88)
.625 (15.88)
.658 (16.71)
.368 (9.35)
.368 (9.35)
.368 (9.35)
.368 (9.35)
.368 (9.35)
.368 (9.35)
.430 (10.92)
.430 (10.92)
.463 (11.76)
.578 (14.68)
.703 (17.86)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
.734 (18.64)
.859 (21.82)
1.000 (24.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.602 (15.29)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
969 (24.61)
11.57 (26.97)
1.156 (23.96)
1.250 (31.75)
1.375 (34.93)
.828 (21.03)
.954 (24.23)
1.047 (26.60)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.412 (10.46)
.412 (10.46)
.412 (10.46)
.412 (10.46)
.412 (10.46)
.462 (11.73)
.556 (14.12)
.556 (14.12)
.589 (14.96)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
12
SERIES PREFIX
How To Order
SERIES PREFIX
TYPE
SHEL SIZE
TERMINATION STYLE
MODIFICATIONS
SERIES PREFIX
TYPE
SHELL SIZE
TERMINATION STYLE
MATERIALS AND FINISHES
DUMMY RECEPTACLE INDICATOR
SHELL SIZE
MODIFICATIONS
SERIES PREFIX
KPT - ITT Cannon Prefix
8 thru 24
None - Olive drab chromate over cadmium
KPT - ITT Cannon Prefix
80 - Plug Cap
81 - Receptacle Cap
C - Sash Chain
N - Sash Chain with Ring (81 type only)
NOTE: For MS version and additional finishes see PV catalog.
(N Style use Primarily for Jam Nut Receptacle)
Protective Cap
Sash Chain
Ring/Rivet
Gasket
KPT
aluminum alloy, olive drab finish per QQ-P-416
stainless steel
stainless steel
polychloroprene
8 thru 24
SHELL SIZE
MODIFICATIONS
www.ittcannon.com 153
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
MIL-C-26482 Specifications
The following excerpts are some of the parameter requirements of the MIL-C-26482 specification.
Test
Description
Contact
Retention
Contact
Insertion/Extraction
(KPSE only)
Coupling
Torque
Durability
Insert Retention
Insulation Resistance
Vibration
Shock
Thermal
Shock
Humidity
Air Leakage
(KPT Only)
Salt Spray
(Corrosion)
Fluid Immersion
Paragraph
Reference
4.6.32.1 After preloading to 3 pounds maximum, the force shall be applied at a rate of approximately 1 pound per second and maintained at full load for 5-10 seconds.
No damage to contacts or insert shall result nor shall the contacts be dislocated from their normal position in the connector more that 0.012 inch under
giveload for KPSE and within 1 minute after the load is removed for KPT.
When using the proper insertion and extraction tools the forces required to insert or extract the contact shall not exceed 20 lbs. Connectors shall be less
endbell.
For qualification testing, mating halves shall be coupled and uncoupled, measuring the torques necessary. The torques required to couple and uncouple mating
connectors halves shall fall within the limits specified as follows:
Connector halves shall be mated and unmated 500 times at a rate of 200 +_ 100 cycles per hour. The test may be performed by hand or by mechanical means,
but the coupling ring shall be operated as in normal service. Failure to complete this test because of mechanical malfunction shall be cause for rejection.
Connectors witht he endbells and grommets (if possible) removed shall be subjected to a 75 psi load on the insulator in both directions. The load shall be
applied at a rate of 10lb/sec. and held for 5 to 10 secs. Insulators shall not be dislogged from their original position.
On unmated connectors at 25˚C±3˚C a potential of 500 VDC ± 10% shall be applied between all, but not more than 6, pairs of adjacent contacts and between
all, but not more than 6, contacts and the shell. Failure to meet a minimum requirement of 5,000 megohms shall be cause for rejection.
Wired, mated connectors shall be subjected to the vibration test of MIL-STD-1344, Method 2005, Test Condition II. Receptacles shall be mounted on the
vibration fixture by normal means, All contacts shall be wired in a series circuit and 100 max. milliamperes of current shall be allowed to flow through the series
circuit during vibration. Suitable means shall be employed to monitor the current f low and to indicate any discontinuity of more than 10 microseconds. The wire
bundle shall be clamped to nonvibrating points at least 8 inches from the rear of the connector. Current discontinuity of 10 microsecond or more,
disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall be cause for rejection.
Wired, mated connectors shall be subjected to one shock in each direction in each of three mutually perpendicular axes. The pulse shall be approximate half
sine wave of 50g±15% magnitude with a duration of 11 ±1 milliseconds. Receptacles shall be mounted on a shock fixture by normal means. All contacts shall
be wired in a series circuit and 90-110 ma, of current shall flow through the series circuit during shock. Suitable means shall be employed to Monitor the
current flow and to indicate any discontinuity of more than 10 microseconds. Current discontinuity of 10 microseconds or more, disengagement of the mated
connectors, evidence of cracking, breaking. or loosening of parts shall be cause for rejection.
Wired, unmated plug and receptacle shall be subjected to 5 cycles of hot and cold temperatures. Maximum temperature shall be + 125˚C and the minimum
shall be -55˚C. Duration at each temperature extreme shall be 1/2 hour minimum. Cracking, breaking or loosening of parts shall be cause for rejection.
The connectors shall be subjected to varying humidity, 50% to 95%, conditions for a period of 10 days KPSE or 20 days KPT. The insulation resistance shall not
be less than 100 megohms.
A 30 psi pressure differential shall be applied across the connector for 30 minutes. The leak rate, in either direction, shall be no greater than 1 atmosphere
cubic inch per hour (4.55 X 10 cm /S) at - 67˚F (- 55˚C).
Unmated and wired connectors shall be subject to a salt fog for 48 hours. These shall be no exposure of base metal, the connector shall be functional and meet
the contact resistance requirement.
At least one connector, unmated and wired, shall he immersed in each fluid for a period of 20 hours then dried at room conditions for hour. Connectors shall be
able to mate and meet the coupling torque requirements.
a) Hydraulic Fluid per MIL-H-5606, b) Lubricating Oil per MIL-L-7808
Contact Size
Shell Size
8
10
12
14
16
8
12
16
20
24
1
1
2
4
4
18
20
22
24
28
32
36
44
4
6
7
7
Max. Min.
Torque Ib./in. Shell Size Max. Min.
Torque Ib./in.
Load in Pounds Min.
20
15
16
25
12
25
4.6.11
4.6.3
4.6.17
4.6.29
4.6.7.1
4.6.21
4.6.23
4.6.12
4.6.25
4.6.15.1
4.6.19
4.6.27
Requirements
-3 3
www.ittcannon.com 154
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
Tooling, Crimp
Tooling, Insertion/Extraction
Contacts
Wire Hole Fillers/Grommets Sealing Plugs
M22520/1-01 CRIMP TOOL
M22520/1-02 Turret
CBT-520/530
KPSE Insertion
Contact Size
20
16
20 Socket
20 Pin
16 Socket
16 Pin
Contacts for printed circuit applicaitons also available
20
16 225-1012-000
225-1011-000 MS3187A20
MS3187-16 Red
Blue
M39029/32-259
M39029/31-240
M39029/32-247
M39029/31-228
031-9074-002
030-9036-000
031-9095-003
030-9032-003
Red
Red
Red
Red
Green
Yellow
Yellow
Red
White
Black
Violet
Grey
MS24256A20
MS24256A16
20
16
MS24256R20
MS24256R16
#20
Contact
Size/Type
Contact
Size Color
Code
Cannon Military
Part Number
Military
Part Number ITT Cannon
Part Number
1st 2nd 3rd
Color Bands
Contact Size
KPSE Extraction
www.ittcannon.com 155
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
KPSE Assembly Instructions
Contact
Size
20
16
Size
8,10,12 and 14
16 and 18
20,22 and 24
Torque in/lbs.
10-15
15-25
25-35
#20-#24
#16-#20
3/16"
1/4"
CRIMPING CONTACTS
1. Strip wires according to the table above taking care not to cut or nick
strands.
CONTACT INSERTION
1. Remove hardware from plug and receptacle. Slide hardware over wire
bundle in proper order for reassembly.
4. Use contacts and grommet sealing plugs to fill any empty cavities. COMPLETION
CONTACT EXTRACTION
1. Check face of plug or receptacle for proper contact installation. 2. Using mating connector with contacts installed, mate both connector
halves together.
3. Assemble ferrule over the grommet by hand as far as possible.
4 Assemble endbell over ferrule and loosely tighten endbell. Partiallly
loosen (1/4 turn) and retighten to recommended torque limits.
COUPLING NUT FERRULE
ENDBELL
ALCOHOL
#16 CONTACTS
INSERTION
SHOULDER
2nd Index Line
Socket Contacts
1st Index Line
Pin Contacts
#20 CONTACTS
TOOL TIP
2. Insert stripped wire into contact crimp pot. Wire must be visible thru
inspection hole.
Strip
Insulation Right
Wrong
Wire
Size
AWG
3. Using correct crimp tool and locator select proper crimp setting for
wire sizer to be crimped; cycle the tool onec to be sure the indentors are
open. Insert contact and wire into locator. Squeeze tool handles firmly
and completely to insure a proper crimp. The tool will not release unless
the crimp indentors in the tool head have been fully actuated. Release
crimped contact and wire from tool. Be certain the wire is visible thru
inspection hole in contact.
CAUTION: Check that none of the contacts are bent or damaged in any
way after crimping.
2. Use the proper contact insertion tool and slide the tool over the
terminal end of the contact. The size 16 contact lies in the tool and the
tool tip butts against the contact shoulder. The rear, or insulation
support of the size 20 contact butts against an internal shoulder in the
tool tip.
NOTE: Apply a small amount of isopropyl alcohol to the insertion tool tip
while installing contacts.
1. Slide hardware back over wire bundle. Using proper extraction tool or
extraction end of proper insertion/extraction tool, proceed as follows: KPSE: There are two lines on the clip sleeve which are vital to the
contact removal process. The first index line is used for removing pin
contacts while the second index line is for removing socket contacts.
Carefully place the tool tip over the contact to be extracted until the
tool tip touches the insulator face. Carefully rotate the tool until the
index line is slightly below the insulator face. Keep an even pressure
against tool body; push plunger forward with thumb and index finger,
and push the contact out throught the clip. Carefully remove extraction
tool from connnector. Pull wire by hand to compete the removal of
the contact.
3. Begining from center cavity and working outwards in a circular
pattern, insert wired contacts into rear of connnector by hand until the
front of the contact shoulder is no more than 1/8" from the grommet.
Holding the connector horizontally, position tool behind contact. Push
tool straight into contact cavity until contact snaps into position. A light
pull on wire will assure that contact is locked securely. Repeat for
remaining contacts.
www.ittcannon.com 156
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-26482, Series I Connectors KPT/KPSE
How to Order - Special Termination Connectors
PREFIX
Solder Type KPT03/04/05-Supplied less endbell, ferrule and grommet.
KPT03 KPT04 KPT05
Solder Type KPSE03/04/05-Supplied less endbell, ferrule.
Twist Pull Lanyard Release Coupler Plug
KPSE03
KPT06/KPSE06
KPT02E KPT07
Printed Circuit Termination
KPSE04 KPSE05
KPT
KPT
KPT
KPSE
KPSE
KPSE
KPT
KPSE 6
6A
E22
22 55
55 P
SW
Z16
16
-
-
03
04
05
03
04
05
18
18
18
18
18
18
P
P
P
P
P
P
W
W
W
W
W
W
32
32
32
32
32
32
-
-
-
-
-
-
-
-
-
-
-
-
SHELL STYLE
PREFIX
SHELL STYLE
SERVICE TYPE
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
POLARIZATION
MODIFICATION CODE*
*Omit (0) of shell style indication when using this modification code.
16 = Overall length of connector including lanyard to be 6.0 (152.40) +_ .125 (3.18) when measured
over a 1.0 (25.40) +_ .005 (0.13) diameter mandrel.
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITION
Contact ITT Cannon for additional Information
P - PIN
S - Socket
DASH (No Class required, less
rear termination)
