T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 1 of 7
1N6036(A) th r u 1N6 07 2(A)
Available on
commercial
versions
1500 WATT BIDIRECTIONAL
TRA NSIENT VOLTAGE SUPPESSOR
Qualified per MIL-PRF-19500/507
Quali f i ed Levels:
JAN , JANTX, and
JANTXV
DESCRIPTION
DO-13 ( D O-202AA)
Package
Also available in:
DO-13 package
(unidirectional)
1N5629 – 1N5665A
Case 1 package
(plastic equivalent)
1.5KE6.8C – 1.5KE220CA
DO-215AB package
(Gull-wing)
SMCG5.0 – SMCG170A
DO-214AB package
(J-bend)
SMCJ5.0 – SMCJ170A
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Thi s p opular Tran sient Voltag e Suppr essor ( TVS) series for 1N60 36 th r u 1N6072A are JE D EC
regis tered selections for bidirectional devices . All have the same hig h P eak P ulse Power
rating of 150 0 W with ext r emel y fast response t im es. They are also available in military
qualified selecti ons as described in th e “Features” section her ein. They are most often u sed
for protecti ng ag ainst transi ents from inductive swit ching environ ments, induced RF effec ts, or
induced sec ondary ligh tning effect s as fou nd in lower surge levels of IEC61000-4-5. They are
als o very successful i n prot ecti ng air borne avioni cs and electrical systems. S in ce their
res ponse time is vir tu ally in stantaneous , they c an also pr otect from ESD and E FT per
IEC61000-4-2 and IEC61000-4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
• Bidirectional TVS series in axial packages for thru-hole mounting.
• Suppresses transients up to 1500 watts @ 10/1000 µs (see Figure 1).
• Clamps transients in less than 100 pico seconds.
• Working voltage (VWM) range 5.5 V to 185 V.
• Hermetically sealed DO-13 metal p ac kage.
• JAN, JANTX, JANTXV military quali fications also available per MIL-PRF-19500/507 for the tighter
tolerance “A” suffix types by adding the JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N6036A,
etc.
• RoHS compliant versions available (commercial grade only).
APPLICAT IONS / BENE FITS
• Protection from switching transients and induced RF.
• Protection from ESD & EFT per IEC 61000-4-2 and IE C 61000-4-4.
• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:
Class 1: 1N6036 to 1N6072A
Class 2: 1N6036 to 1N6067A
Class 3: 1N6036 to 1N6061A
Class 4: 1N6036 to 1N6054A
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
Class 1: 1N6036 to 1N6064A
Class 2: 1N6036 to 1N6057A
Class 3: 1N6036 to 1N6049A
Class 4: 1N6036 to 1N6042A
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
Class 2: 1N6036 to 1N6048A
Class 3: 1N6036 to 1N6041A
• Inherently radiation hard as described in Microsemi “Micr oNote 050 ”.
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 2 of 7
1N6036(A) th r u 1N6 07 2(A)
MAXIMUM RATINGS
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-55 to +175
ºC
Peak Pulse Power @ TL = +25 ºC (1)
PPP
1500
W
Rated Average Power Dissipation @ TL ≤ +125 ºC (2)
PM(AV)
1
W
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. At 10/1000 u s with repetition rate of 0.01% or less (see Figures 1, 2, & 4).
2. At 10 mm from body (see derating in Figure 3 and note below).
M ECHANICAL and PACKAGI NG
• CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass.
• TERMINALS: All external metal surfaces are tin-lead plated and solderable per MIL-STD-750 method 2026.
• MARKING: Part number.
• POLARITY: Not applicable for bidirectional TV S.
• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approx 1.4 grams.
• See Package Dimensions on last page.
PART NOME NCL ATURE
JAN 1N6036 A (e3)
Reliability Level
JAN = JAN lev el
JANTX = JANTX level
JANTXV = JANTXV l evel
(All of the above require “A” suffix )
Blank = Commercial
JEDEC type number
(See Electrical Characteristics
table)
RoHS Compl iance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Voltage Tolerance
A = 5%
Blank = 10%
SYMBOL S & DEFI NITIONS
Symbol
Definition
VWM
Standoff Voltage: Applied Reverse Voltage to assure a nonconductive condition.
V(BR)
Breakdown Voltage: This is the Breakdown Voltage the device will exhibit at 25 oC.
VC
Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the peak pulse
current in a one m illisecond time interval. The peak pulse voltage is the combination of voltage rise due to both the
series resistance and thermal rise and positive temperature coefficient (αV(BR) ).
I
PP
Peak Pulse Current: The peak current during the impulse. (See Figure 2)
PPP
Peak Pulse Power: The pulse power as determined by the product of VC and IPP.
I
D
Standby Current: The current at the standoff voltage (V
WM
).
I(BR)
Breakdown Current: The current used for measuring Breakdown Voltage (V(BR) ).
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 3 of 7
1N6036(A) th r u 1N6 07 2(A)
ELECTRI CAL CHARACTERISTI CS @ 25 oC (Tes t Both Polarities)
JEDEC
Type
No.
Rated
Standoff
Voltage
VWM
Breakdown
Voltage
V(BR)
Maximum
Clamping
Voltage
VC @ IPP
Maximum
Standby
Current
ID @ VWM
Maximum
Peak Pulse
Current
IPP
(See Fig. 2)
Maximum
Temperature
Coefficient o f
V(BR)
V
(BR)min
V
(BR)max
@ I
(BR)
Volts
Volts
Volts
mA
Volts
µA
Amps
α
V(BR)
%/
o
C
1N6036
*1N6036A
1N6037
*1N6037A
5.5
6.0
6.5
7.0
6.75
7.13
7.38
7.79
8.25
7.88
9.02
8.61
10
10
10
10
11.7
11.3
12.5
12.1
1000
1000
500
500
128
132
120
124
.061
.061
.065
.065
1N6038
*1N6038A
1N6039
*1N6039A
7.0
7.5
8.0
8.5
8.19
8.65
9.0
9.5
10.00
9.55
11.0
10.5
10
10
1
1
13.8
13.4
15.0
14.5
200
200
50
50
109
112
100
103
.068
.068
.073
.073
1N6040
*1N6040A
1N6041
*1N6041A
8.5
9.0
9.0
10.0
9.9
10.5
10.8
11.4
12.1
11.6
13.2
12.6
1
1
1
1
16.2
15.6
17.3
16.7
10
10
5
5
93
96
87
90
.075
.075
.078
.078
1N6042
*1N6042A
1N6043
*1N6043A
10.0
11.0
11.0
12.0
11.7
12.4
13.5
14.3
14.3
13.7
16.5
15.8
1
1
1
1
19.0
18.2
22.0
21.2
5
5
5
5
79
82
68
71
.081
.081
.084
.084
1N6044
*1N6044A
1N6045
*1N6045A
12.0
13.0
14.0
15.0
14.4
15.2
16.2
17.1
17.5
16.8
19.8
18.9
1
1
1
1
23.5
22.5
26.5
25.2
5
5
5
5
64
67
56.5
59.5
.086
.086
.088
.088
1N6046
*1N6046A
1N6047
*1N6047A
16.0
17.0
17.0
18.0
18.0
19.0
19.8
20.9
22.0
21.0
24.2
23.1
1
1
1
1
29.1
27.7
31.9
30.6
5
5
5
5
51.5
54
47
49
.090
.090
.092
.092
1N6048
*1N6048A
1N6049
*1N6049A
19.0
20.0
21.0
22.0
21.6
22.8
24.3
25.7
26.4
25.2
29.7
28.4
1
1
1
1
34.7
33.2
39.1
37.5
5
5
5
5
43
45
38.5
40
.094
.094
.095
.096
1N6050
*1N6050A
1N6051
*1N6051A
24.0
25.0
26.0
28.0
27.0
28.5
29.7
31.4
33.0
31.5
36.3
34.7
1
1
1
1
43.5
41.4
47.7
45.7
5
5
5
5
34.5
36
31.5
33
.097
.097
.098
.098
1N6052
*1N6052A
1N6053
*1N6053A
29.0
30.0
31.0
33.0
32.4
34.2
35.1
37.1
39.6
37.8
42.9
41.0
1
1
1
1
52.0
49.9
56.4
53.9
5
5
5
5
29
30
26.5
28
.099
.099
.100
.100
1N6054
*1N6054A
1N6055
*1N6055A
34.0
36.0
38.0
40.0
38.7
40.9
42.3
44.7
47.3
45.2
51.7
49.4
1
1
1
1
61.9
59.3
67.8
64.8
5
5
5
5
24
25.3
22.2
23.2
.101
.101
.101
.101
1N6056
*1N6056A
1N6057
*1N6057A
41.0
43.0
45.0
47.0
45.9
48.5
50.4
53.2
56.1
53.6
61.6
58.8
1
1
1
1
73.5
70.1
80.5
77.0
5
5
5
5
20.4
21.4
18.6
19.5
.102
.102
.103
.103
1N6058
*1N6058A
1N6059
*1N6059A
48.0
53.0
55.0
58.0
55.8
58.9
61.2
64.6
68.2
65.1
74.8
71.4
1
1
1
1
89.0
85.0
98.0
92.0
5
5
5
5
16.9
17.7
15.3
16.3
.104
.104
.104
.104
1N6060
*1N6060A
1N6061
*1N6061A
60.0
64.0
66.0
70.0
67.5
71.3
73.8
77.9
82.5
78.8
90.2
86.1
1
1
1
1
108.0
103.0
118.0
113.0
5
5
5
5
13.9
14.6
12.7
13.3
.105
.105
.105
.105
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 4 of 7
1N6036(A) th r u 1N6 07 2(A)
ELECTRI CAL CHARACTERISTI CS @ 25 oC (Test Both Polarities)
JEDEC
Type
No.
Rated
Standoff
Voltage
VWM
Breakdown
Voltage
V(BR)
Maximum
Clamping
Voltage
VC @ IPP
Maximum
Standby
Current
ID @ VWM
Maximum
Peak Pulse
Current
IPP
(See Fig. 2)
Maximum
Temperature
Coefficient o f
V(BR)
V
(BR)min
V
(BR)max
@ I
(BR)
Volts
Volts
Volts
mA
Volts
µ
A
Amps
α
V(BR)
%/
o
C
1N6062
*1N6062A
1N6063
*1N6063A
73.0
75.0
81.0
82.0
81.9
86.5
90.0
95.0
100.0
95.5
110.0
105.0
1
1
1
1
131.0
125.0
144.0
137.0
5
5
5
5
11.4
12.0
10.4
11.0
.106
.106
.106
.106
1N6064
*1N6064A
1N6065
*1N6065A
90.0
94.0
95.0
100.0
99.0
105.0
108.0
114.0
121.0
116.0
132.0
126.0
1
1
1
1
158.0
152.0
176.0
168.0
5
5
5
5
9.5
9.9
8.5
8.9
.107
.107
.107
.107
1N6066
*1N6066A
1N6067
*1N6067A
105.0
110.0
121.0
128.0
117.0
124.0
135.0
143.0
143.0
137.0
165.0
158.0
1
1
1
1
191.0
182.0
223.0
213.0
5
5
5
5
7.8
8.2
6.7
7.0
.107
.107
.108
.108
1N6068
*1N6068A
1N6069
*1N6069A
137.0
145.0
145.0
150.0
153.0
162.0
162.0
171.0
187.0
179.0
198.0
189.0
1
1
1
1
258.0
245.0
274.0
261.0
5
5
5
5
5.8
6.1
5.5
5.7
.108
.108
.108
.108
1N6070
*1N6070A
1N6071
*1N6071A
155.0
160.0
165.0
170.0
171.0
181.0
180.0
190.0
210.0
200.0
220.0
210.0
1
1
1
1
292.0
278.0
308.0
294.0
5
5
5
5
5.1
5.4
4.9
5.1
.108
.108
.108
.108
1N6072
*1N6072A
175.0
185.0
198.0
209.0
242.0
231.0
1
1
344.0
328.0
5
5
4.3
4.6
.108
.108
* Also avai lable in military qualified types by adding the prefix JAN, JANTX or JANTXV per MIL-PRF-19500/507.
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 5 of 7
1N6036(A) th r u 1N6 07 2(A)
GRAPHS
A m bient Temper ature in °C
FIGURE 1
Derating Curve
P ulse Time (tp)
FIGURE 2
Peak Pulse Power versu s Pulse Time
Peak Pulse Power (P
pp
) o r Current I
pp
in
percent of 25° C Rating
Reverse Peak Pulse Power (P
pp
)
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 6 of 7
1N6036(A) th r u 1N6 07 2(A)
GRAPHS
Tim e (t) in millis econ ds
FIGURE 3
Current impulse waveform (IPP = 10 μs)
Tim e (t) in millis econ ds
FIGURE 4
Current i m puls e waveform (IPP = 8 μs).
Pulse Current in Percent of I
pp
Pulse Current in Percent of I
pp
T4-LDS-0097, Rev. 3 (120714) ©2012 Microsemi Corporation Page 7 of 7
1N6036(A) th r u 1N6 07 2(A)
PACKAGE DIM ENSIONS
NOTES:
1 Dimensions are in inches.
2 Millimeter equivalents are given for general information only.
3 The major diam eter is essentia lly con stant a long its length.
4 Within this zone, diameter may var y to all ow for lead finishes and
irregularities.
5 Dimension to allow for pinch or seal deformation anyw here along
tubulation.
6 Symbol for bidirectional transient suppressor.
7 Lead 1 shall be electrically connected to the case.
8 In accordance with ASME Y14.5M, diameters are equi valent to Φx
symbology.
Dimensions
Symbol
Inches
Millimeters
Notes
Min
Max
Min
Max
BD
.215
.235
5.46
5.97
BL
.293
.357
7.44
9.07
3
BLT
.570
14.48
CD
.045
.100
1.14
2.54
5
LD
.025
.035
0.64
0.89
LL
1.000
1.625
25.40
41.28
LU
.188
4.78
4
