74LVC1G74DC,125 - NEXPERIA

74LVC1G74

Single D-type flip-flop with set and reset;

positive edge trigger

Rev. 14 — 27 December 2018 Product data sheet

1. General description

The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D) inputs,

clock (CP) inputs, set (SD) and reset (RD) inputs, and complementary Q and Q outputs.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing damaging backflow current through the device when it is powered

down.

The set and reset are asynchronous active LOW inputs and operate independently of the clock

input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition

of the clock pulse. The D inputs must be stable one set-up time prior to the LOW-to-HIGH clock

transition for predictable operation.

Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall

times.

2. Features and benefits

•Wide supply voltage range from 1.65 V to 5.5 V

•5 V tolerant inputs for interfacing with 5 V logic

•High noise immunity

•Complies with JEDEC standard:

•JESD8-7 (1.65 V to 1.95 V)

•JESD8-5 (2.3 V to 2.7 V)

•JESD8-B/JESD36 (2.7 V to 3.6 V)

•ESD protection:

•HBM JESD22-A114F exceeds 2000 V

•MM JESD22-A115-A exceeds 200 V

•±24 mA output drive (VCC = 3.0 V)

•CMOS low power consumption

•Latch-up performance exceeds 250 mA

•Direct interface with TTL levels

•Inputs accept voltages up to 5 V

•Multiple package options

•Specified from -40 °C to +85 °C and -40 °C to +125 °C

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

3. Ordering information

Table 1. Ordering information

PackageType number

Temperature range Name Description Version

74LVC1G74DP -40 °C to +125 °C TSSOP8 plastic thin shrink small outline package; 8 leads;

body width 3 mm; lead length 0.5 mm

SOT505-2

74LVC1G74DC -40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package;

8 leads; body width 2.3 mm

SOT765-1

74LVC1G74GT -40 °C to +125 °C XSON8 plastic extremely thin small outline package;

no leads; 8 terminals; body 1 × 1.95 × 0.5 mm

SOT833-1

74LVC1G74GF -40 °C to +125 °C XSON8 extremely thin small outline package; no leads;

8 terminals; body 1.35 × 1 × 0.5 mm

SOT1089

74LVC1G74GM -40 °C to +125 °C XQFN8 plastic, extremely thin quad flat package;

no leads; 8 terminals; body 1.6 × 1.6 × 0.5 mm

SOT902-2

74LVC1G74GN -40 °C to +125 °C XSON8 extremely thin small outline package; no leads;

8 terminals; body 1.2 × 1.0 × 0.35 mm

SOT1116

74LVC1G74GS -40 °C to +125 °C XSON8 extremely thin small outline package; no leads;

8 terminals; body 1.35 × 1.0 × 0.35 mm

SOT1203

4. Marking

Table 2. Marking codes

Type number Marking code [1]

74LVC1G74DP V74

74LVC1G74DC V74

74LVC1G74GT V74

74LVC1G74GF Y4

74LVC1G74GM V74

74LVC1G74GN Y4

74LVC1G74GS Y4

[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.

5. Functional diagram

001aah757

Fig. 1. Logic symbol

001aah758

Fig. 2. IEC logic symbol

Product data sheet Rev. 14 — 27 December 2018 2 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

mna421

Fig. 3. Logic diagram

6. Pinning information

6.1. Pinning

74LVC1G74

CP VCC

D SD

Q RD

GND Q

001aab659

Fig. 4. Pin configuration SOT505-2 (TSSOP8) and

SOT765-1 (VSSOP8)

74LVC1G74

VCC

GND

001aab658

3 6

2 7

1 8

4 5

Transparent top view

Fig. 5. Pin configuration SOT833-1, SOT1089, SOT1116

and SOT1203 (XSON8)

001aaf641

DRD

GND

Transparent top view

terminal 1

index area

74LVC1G74

Fig. 6. Pin configuration SOT902-2 (XQFN8)

Product data sheet Rev. 14 — 27 December 2018 3 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

6.2. Pin description

Table 3. Pin description

PinSymbol

SOT505-2, SOT765-1, SOT833-1,

SOT1089, SOT1116 and SOT1203

SOT902-2

Description

CP 1 7 clock input (LOW-to-HIGH, edge-triggered)

D 2 6 data input

Q 3 5 complement output

GND 4 4 ground (0 V)

Q 5 3 true output

RD 6 2 asynchronous reset-direct input (active LOW)

SD 7 1 asynchronous set-direct input (active LOW)

VCC 8 8 supply voltage

7. Functional description

Table 4. Function table for asynchronous operation

H = HIGH voltage level; L = LOW voltage level; X = don’t care.

Input Output

SD RD CP D Q Q

L H X X H L

H L X X L H

L L X X H H

Table 5. Function table for synchronous operation

H = HIGH voltage level; L = LOW voltage level; ↑ = LOW-to-HIGH CP transition;

Qn+1 = state after the next LOW-to-HIGH CP transition.

Input Output

SD RD CP D Qn+1 Qn+1

H H ↑ L L H

HH↑ HHL

Product data sheet Rev. 14 — 27 December 2018 4 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

8. Limiting values

Table 6. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage -0.5 +6.5 V

IIK input clamping current VI < 0 V -50 - mA

VIinput voltage [1] -0.5 +6.5 V

IOK output clamping current VO > VCC or VO < 0 V - ±50 mA

Active mode [1] -0.5 VCC + 0.5 VVOoutput voltage

Power-down mode; VCC = 0 V [1] -0.5 +6.5 V

IOoutput current VO = 0 V to VCC - ±50 mA

ICC supply current - 100 mA

IGND ground current -100 - mA

Ptot total power dissipation Tamb = -40 °C to +125 °C [2] - 300 mW

Tstg storage temperature -65 +150 °C

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For TSSOP8 packages: above 55 °C the value of Ptot derates linearly with 2.5 mW/K.

For VSSOP8 packages: above 110 °C the value of Ptot derates linearly with 8.0 mW/K.

For XSON8 and XQFN8 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.

9. Recommended operating conditions

Table 7. Operating conditions

Symbol Parameter Conditions Min Max Unit

VCC supply voltage 1.65 5.5 V

VIinput voltage 0 5.5 V

Active mode 0 VCC VVOoutput voltage

Power-down mode; VCC = 0 V 0 5.5 V

Tamb ambient temperature -40 +125 °C

VCC = 1.65 V to 2.7 V - 20 ns/VΔt/ΔV input transition rise and fall rate

VCC = 2.7 V to 5.5 V - 10 ns/V

Product data sheet Rev. 14 — 27 December 2018 5 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

10. Static characteristics

Table 8. Static characteristics

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

Tamb = -40 °C to +85 °C Tamb =

-40 °C to +125 °C

Symbol Parameter Conditions

Min Typ [1] Max Min Max

Unit

VCC = 1.65 V to 1.95 V 0.65VCC - - 0.65VCC - V

VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - V

VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V

VIH HIGH-level input

voltage

VCC = 4.5 V to 5.5 V 0.7VCC - - 0.7VCC - V

VCC = 1.65 V to 1.95 V - - 0.35VCC - 0.35VCC V

VCC = 2.3 V to 2.7 V - - 0.7 - 0.7 V

VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V

VIL LOW-level input

voltage

VCC = 4.5 V to 5.5 V - - 0.3VCC - 0.3VCC V

VI = VIH or VIL

IO = -100 μA;

VCC = 1.65 V to 5.5 V

VCC - 0.1 - - VCC - 0.1 - V

IO = -4 mA; VCC = 1.65 V 1.2 1.54 - 0.95 - V

IO = -8 mA; VCC = 2.3 V 1.9 2.15 - 1.7 - V

IO = -12 mA; VCC = 2.7 V 2.2 2.50 - 1.9 - V

IO = -24 mA; VCC = 3.0 V 2.3 2.62 - 2.0 - V

VOH HIGH-level output

voltage

IO = -32 mA; VCC = 4.5 V 3.8 4.11 - 3.4 - V

VI = VIH or VIL

IO = 100 μA;

VCC = 1.65 V to 5.5 V

- - 0.10 - 0.10 V

IO = 4 mA; VCC = 1.65 V - 0.07 0.45 - 0.70 V

IO = 8 mA; VCC = 2.3 V - 0.12 0.30 - 0.45 V

IO = 12 mA; VCC = 2.7 V - 0.17 0.40 - 0.60 V

IO = 24 mA; VCC = 3.0 V - 0.33 0.55 - 0.80 V

VOL LOW-level output

voltage

IO = 32 mA; VCC = 4.5 V - 0.39 0.55 - 0.80 V

IIinput leakage

current

VI = 5.5 V or GND;

VCC = 0 V to 5.5 V

- ±0.1 ±1 - ±1 μA

IOFF power-off leakage

current

VI or VO = 5.5 V; VCC = 0 V - ±0.1 ±2 - ±2 μA

ICC supply current VI = 5.5 V or GND;

VCC = 1.65 V to 5.5 V; IO = 0 A

- 0.1 4 - 4 μA

ΔICC additional supply

current

per pin; VI = VCC - 0.6 V;

IO = 0 A; VCC = 2.3 V to 5.5 V

- 5 500 - 500 μA

CIinput capacitance - 4.0 - - - pF

[1] All typical values are measured at Tamb = 25 °C.

Product data sheet Rev. 14 — 27 December 2018 6 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

11. Dynamic characteristics

Table 9. Dynamic characteristics

Voltages are referenced to GND (ground = 0 V); for test circuit see Fig. 9.

Tamb = -40 °C to +85 °C Tamb =

-40 °C to +125 °C

Symbol Parameter Conditions

Min Typ [1] Max Min Max

Unit

CP to Q, Q; see Fig. 7 [2]

VCC = 1.65 V to 1.95 V 1.5 6.0 13.4 1.5 13.4 ns

VCC = 2.3 V to 2.7 V 1.0 3.5 7.1 1.0 7.1 ns

VCC = 2.7 V 1.0 3.5 7.1 1.0 7.1 ns

VCC = 3.0 V to 3.6 V 1.0 3.5 5.9 1.0 5.9 ns

VCC = 4.5 V to 5.5 V 1.0 2.5 4.1 1.0 4.1 ns

SD to Q, Q; see Fig. 8 [2]

VCC = 1.65 V to 1.95 V 1.5 6.0 12.9 1.5 12.9 ns

VCC = 2.3 V to 2.7 V 1.0 3.5 7.0 1.0 7.0 ns

VCC = 2.7 V 1.0 3.5 7.0 1.0 7.0 ns

VCC = 3.0 V to 3.6 V 1.0 3.0 5.9 1.0 5.9 ns

VCC = 4.5 V to 5.5 V 1.0 2.5 4.1 1.0 4.1 ns

RD to Q, Q; see Fig. 8 [2]

VCC = 1.65 V to 1.95 V 1.5 5.0 12.9 1.5 12.9 ns

VCC = 2.3 V to 2.7 V 1.0 3.5 7.0 1.0 7.0 ns

VCC = 2.7 V 1.0 3.5 7.0 1.0 7.0 ns

VCC = 3.0 V to 3.6 V 1.0 3.0 5.9 1.0 5.9 ns

tpd propagation delay

VCC = 4.5 V to 5.5 V 1.0 2.5 4.1 1.0 4.1 ns

CP HIGH or LOW; see Fig. 7

VCC = 1.65 V to 1.95 V 6.2 - - 6.2 - ns

VCC = 2.3 V to 2.7 V 2.7 - - 2.7 - ns

VCC = 2.7 V 2.7 - - 2.7 - ns

VCC = 3.0 V to 3.6 V 2.7 1.3 - 2.7 - ns

VCC = 4.5 V to 5.5 V 2.0 - - 2.0 - ns

SD and RD LOW; see Fig. 8

VCC = 1.65 V to 1.95 V 6.2 - - 6.2 - ns

VCC = 2.3 V to 2.7 V 2.7 - - 2.7 - ns

VCC = 2.7 V 2.7 - - 2.7 - ns

VCC = 3.0 V to 3.6 V 2.7 1.6 - 2.7 - ns

tWpulse width

VCC = 4.5 V to 5.5 V 2.0 - - 2.0 - ns

SD or RD; see Fig. 8

VCC = 1.65 V to 1.95 V 1.9 - - 1.9 - ns

VCC = 2.3 V to 2.7 V 1.4 - - 1.4 - ns

VCC = 2.7 V 1.3 - - 1.3 - ns

VCC = 3.0 V to 3.6 V +1.2 -3.0 - +1.2 - ns

trec recovery time

VCC = 4.5 V to 5.5 V 1.0 - - 1.0 - ns

Product data sheet Rev. 14 — 27 December 2018 7 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

Tamb = -40 °C to +85 °C Tamb =

-40 °C to +125 °C

Symbol Parameter Conditions

Min Typ [1] Max Min Max

Unit

D to CP; see Fig. 7

VCC = 1.65 V to 1.95 V 2.9 - - 2.9 - ns

VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - ns

VCC = 2.7 V 1.7 - - 1.7 - ns

VCC = 3.0 V to 3.6 V 1.3 0.5 - 1.3 - ns

tsu set-up time

VCC = 4.5 V to 5.5 V 1.1 - - 1.1 - ns

D to CP; see Fig. 7

VCC = 1.65 V to 1.95 V 1.5 - - 1.5 - ns

VCC = 2.3 V to 2.7 V 1.0 - - 1.0 - ns

VCC = 2.7 V 1.0 - - 1.0 - ns

VCC = 3.0 V to 3.6 V 1.0 0.6 - 1.0 - ns

thhold time

VCC = 4.5 V to 5.5 V 1.0 - - 1.0 - ns

CP; see Fig. 7

VCC = 1.65 V to 1.95 V 80 - - 80 - MHz

VCC = 2.3 V to 2.7 V 175 - - 175 - MHz

VCC = 2.7 V 175 - - 175 - MHz

VCC = 3.0 V to 3.6 V 175 280 - 175 - MHz

fmax maximum

frequency

VCC = 4.5 V to 5.5 V 200 - - 200 - MHz

CPD power dissipation

capacitance

VI = GND to VCC; VCC = 3.3 V [3] - 15 - - - pF

[1] Typical values are measured at Tamb = 25 °C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.

[2] tpd is the same as tPLH and tPHL.

[3] CPD is used to determine the dynamic power dissipation (PD in μW).

PD = CPD × VCC

2 × fi × N + Σ(CL × VCC

2 × fo) where:

fi = input frequency in MHz;

fo = output frequency in MHz;

CL = output load capacitance in pF;

VCC = supply voltage in V;

N = number of inputs switching;

Σ(CL × VCC

2 × fo) = sum of outputs.

Product data sheet Rev. 14 — 27 December 2018 8 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

11.1. Waveforms and test circuit

mnb141

tsu

tPHL

tPLH

tsu

1/fmax

GND

CP input

D input

VOH

VOL

Q output

VOH

VOL

Q output

Measurement points are given in Table 10.

The shaded areas indicate when the input is permitted to change for predictable output performance.

VOL and VOH are typical output voltage levels that occur with the output load.

Fig. 7. The clock input (CP) to output (Q, Q) propagation delays and pulse width, D to CP set-up,

CP to D hold times and the maximum frequency

Product data sheet Rev. 14 — 27 December 2018 9 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

mnb142

trec

tPHL

tPLH

GND

SD input

GND

RD input

CP input

VOH

VOL

Q output

VOH

VOL

Q output

trec

Measurement points are given in Table 10.

VOL and VOH are typical output voltage levels that occur with the output load.

Fig. 8. The set (SD) and reset (RD) input to output (Q, Q) propagation delays, pulse widths and the RD to CP

recovery time

Table 10. Measurement points

Supply voltage Input Output

VCC VMVM

1.65 V to 1.95 V 0.5 × VCC 0.5 × VCC

2.3 V to 2.7 V 0.5 × VCC 0.5 × VCC

2.7 V 1.5 V 1.5 V

3.0 V to 3.6 V 1.5 V 1.5 V

4.5 V to 5.5 V 0.5 × VCC 0.5 × VCC

Product data sheet Rev. 14 — 27 December 2018 10 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

VEXT

VCC

VIVO

mna616

DUT

Test data is given in Table 11.

Definitions for test circuit:

RL = Load resistance.

CL = Load capacitance including jig and probe capacitance.

RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.

VEXT = External voltage for measuring switching times.

Fig. 9. Test circuit for measuring switching times

Table 11. Test data

Supply voltage Input Load VEXT

VCC VItr, tfCLRLtPLH, tPHL tPZH, tPHZ tPZL, tPLZ

1.65 V to 1.95 V VCC ≤ 2.0 ns 30 pF 1 kΩ open GND 2 × VCC

2.3 V to 2.7 V VCC ≤ 2.0 ns 30 pF 500 Ω open GND 2 × VCC

2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open GND 6 V

3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open GND 6 V

4.5 V to 5.5 V VCC ≤ 2.5 ns 50 pF 500 Ω open GND 2 × VCC

Product data sheet Rev. 14 — 27 December 2018 11 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

12. Package outline

UNIT A1

max. A2 A3 bp L HE Lp w y v

c e D(1) E(1) Z(1) θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.15

0.00

0.95

0.75

0.38

0.22

0.18

0.08

3.1

2.9

3.1

2.9 0.65 4.1

3.9

0.70

0.35

8°

0°

0.13 0.1 0.2 0.5

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

0.47

0.33

SOT505-2 - - - 02-01-16

w M

0.25

1 4

8 5

(A3)

detail X

v M A

2.5 5 mm 0

scale

TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2

1.1

pin 1 index

Fig. 10. Package outline SOT505-2 (TSSOP8)

Product data sheet Rev. 14 — 27 December 2018 12 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT765-1 MO-187

sot765-1_po

07-06-02

16-05-31

Unit

max

nom

min

0.15 0.27 0.23 2.1

0.5

0.4

max.

Dimensions (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.

VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1

A1A2

0.85

A3bpc D(1) E(2) e HEL

0.4

LpQ v w

1 0.12 0.10.2 0.08

y Z(1)

3.0 0.152.2 0.190.00 0.17 0.08 1.9 0.10.60 0°

3.2 0.402.4 0.21 8°

scale

5 mm

detail X

v A

1 4

(A3)

pin 1 index

Fig. 11. Package outline SOT765-1 (VSSOP8)

Product data sheet Rev. 14 — 27 December 2018 13 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

terminal 1

index area

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT833-1 - - -

MO-252

- - -

SOT833-1

07-11-14

07-12-07

DIMENSIONS (mm are the original dimensions)

XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm

e1e1

0 1 2 mm

scale

Notes

1. Including plating thickness.

2. Can be visible in some manufacturing processes.

UNIT

mm 0.25

0.17

2.0

1.9

0.35

0.27

max b E

1.05

0.95

D e e1L

0.40

0.32

0.50.6

A(1)

max

0.5 0.04

8×

(2)

4×

(2)

Fig. 12. Package outline SOT833-1 (XSON8)

Product data sheet Rev. 14 — 27 December 2018 14 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT1089

MO-252

sot1089_po

10-04-09

10-04-12

Unit

max

nom

min

0.5 0.04 1.40

1.35

1.30

1.05

1.00

0.95

0.55 0.35

0.35

0.30

0.27

A(1)

Dimensions

Note

1. Including plating thickness.

2. Visible depending upon used manufacturing technology.

XSON8: extremely thin small outline package; no leads;

8 terminals; body 1.35 x 1 x 0.5 mm SOT1089

A1b L1

0.40

0.35

0.32

0.20

0.15

0.12

D E e e1L

0 0.5 1 mm

scale

terminal 1

index area

detail X

terminal 1

index area

(4×)(2)

(8×)(2)

Fig. 13. Package outline SOT1089 (XSON8)

Product data sheet Rev. 14 — 27 December 2018 15 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT902-2 - - -

MO-255

- - -

sot902-2_po

16-07-14

16-11-08

Unit(1)

max

nom

min

0.5 0.05

0.00

1.65

1.60

1.55

1.65

1.60

1.55

0.55 0.5

0.15

0.10

0.05

0.1 0.05

0.2

Dimensions

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

XQFN8: plastic, extremely thin quad flat package; no leads;

8 terminals; body 1.6 x 1.6 x 0.5 mm SOT902-2

A1b

0.25

0.20

0.15

D E e e1L

0.35

0.30

0.25

0.20

0.15

0.35

0.30

0.25

L3v w

0.05

y y1

0.05

0 1 2 mm

scale

terminal 1

index area

B AD

terminal 1

index area

L k

AC Bv

metal area

not for soldering

detail X

Fig. 14. Package outline SOT902-2 (XQFN8)

Product data sheet Rev. 14 — 27 December 2018 16 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT1116

sot1116_po

10-04-02

10-04-07

Unit

max

nom

min

0.35 0.04 1.25

1.20

1.15

1.05

1.00

0.95

0.55 0.3

0.40

0.35

0.32

A(1)

Dimensions

Note

1. Including plating thickness.

2. Visible depending upon used manufacturing technology.

XSON8: extremely thin small outline package; no leads;

8 terminals; body 1.2 x 1.0 x 0.35 mm SOT1116

A1b

0.20

0.15

0.12

D E e e1L

0.35

0.30

0.27

0 0.5 1 mm

scale

terminal 1

index area

(4×)(2)

(8×)(2)

A1A

e1e1e1

4321

5678

Fig. 15. Package outline SOT1116 (XSON8)

Product data sheet Rev. 14 — 27 December 2018 17 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT1203

sot1203_po

10-04-02

10-04-06

Unit

max

nom

min

0.35 0.04 1.40

1.35

1.30

1.05

1.00

0.95

0.55 0.35

0.40

0.35

0.32

A(1)

Dimensions

Note

1. Including plating thickness.

2. Visible depending upon used manufacturing technology.

XSON8: extremely thin small outline package; no leads;

8 terminals; body 1.35 x 1.0 x 0.35 mm SOT1203

A1b

0.20

0.15

0.12

D E e e1L

0.35

0.30

0.27

0 0.5 1 mm

scale

terminal 1

index area

(4×)(2)

(8×)(2)

e1e1e1

Fig. 16. Package outline SOT1203 (XSON8)

Product data sheet Rev. 14 — 27 December 2018 18 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

13. Abbreviations

Table 12. Abbreviations

Acronym Description

CMOS Complementary Metal-Oxide Semiconductor

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

TTL Transistor-Transistor Logic

14. Revision history

Table 13. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74LVC1G74 v.14 20181227 Product data sheet - 74LVC1G74 v.13

Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines

of Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

•Type number 74LVC1G74GD (SOT996-2) removed.

74LVC1G74 v.13 20161205 Product data sheet - 74LVC1G74 v.12

Modifications: •Table 8: The maximum limits for leakage current and supply current have changed.

74LVC1G74 v.12 20130402 Product data sheet - 74LVC1G74 v.11

Modifications: •For type number 74LVC1G74GD XSON8U has changed to XSON8.

74LVC1G74 v.11 20120604 Product data sheet - 74LVC1G74 v.10

Modifications: •For type number 74LVC1G74GM the SOT code has changed to SOT902-2.

74LVC1G74 v.10 20111202 Product data sheet - 74LVC1G74 v.9

Modifications: •Legal pages updated.

74LVC1G74 v.9 20100805 Product data sheet - 74LVC1G74 v.8

74LVC1G74 v.8 20091203 Product data sheet - 74LVC1G74 v.7

74LVC1G74 v.7 20080626 Product data sheet - 74LVC1G74 v.6

74LVC1G74 v.6 20080219 Product data sheet - 74LVC1G74 v.5

74LVC1G74 v.5 20070809 Product data sheet - 74LVC1G74 v.4

74LVC1G74 v.4 20061207 Product data sheet - 74LVC1G74 v.3

74LVC1G74 v.3 20050201 Product specification - 74LVC1G74 v.2

74LVC1G74 v.2 20040909 Product specification - 74LVC1G74 v.1

74LVC1G74 v.1 20040202 Product specification - -

Product data sheet Rev. 14 — 27 December 2018 19 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

15. Legal information

Data sheet status

Document status

[1][2]

Product

status [3]

Definition

Objective [short]

data sheet

Development This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification This document contains data from

the preliminary specification.

Product [short]

data sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Product data sheet Rev. 14 — 27 December 2018 20 / 21

Nexperia 74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Ordering information....................................................2

4. Marking.......................................................................... 2

5. Functional diagram.......................................................2

6. Pinning information......................................................3

6.1. Pinning.........................................................................3

6.2. Pin description............................................................. 4

7. Functional description................................................. 4

8. Limiting values............................................................. 5

9. Recommended operating conditions..........................5

10. Static characteristics..................................................6

11. Dynamic characteristics.............................................7

11.1. Waveforms and test circuit........................................ 9

12. Package outline........................................................ 12

13. Abbreviations............................................................ 19

14. Revision history........................................................19

15. Legal information......................................................20

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 27 December 2018

Product data sheet Rev. 14 — 27 December 2018 21 / 21