19-2688; Rev 0; 1/03 Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers Features 310ps Propagation Delay Three single-ended select inputs, SEL0, SEL1, and SEL2, control the mux function. The mux select inputs are compatible with ECL/PECL logic, and are internally referenced to the on-chip reference output (VBB1, VBB2), nominally VCC - 1.425V. The select inputs accept signals between VCC and VEE. Internal pulldowns to VEE ensure a low default condition if the select inputs are left open. -2.375V to -5.5V Supplies for Differential LVECL/ECL The differential inputs D_, D_ can be configured to accept a single-ended signal when the unused complementary input is connected to the on-chip reference output (V BB1, V BB2). All the differential inputs have internal bias and clamping circuits that ensure a low output state when the inputs are left open. The MAX9389 operates with a wide supply range VCC VEE of 2.375V to 5.5V. The device is offered in 32-pin TQFP and thin QFN packages, and operates over the -40C to +85C extended temperature range. Guaranteed 2.7GHz Operating Frequency 0.3psRMS Random Jitter <30ps Output-to-Output Skew +2.375V to +5.5V Supplies for Differential LVPECL/PECL Outputs Low for Open Inputs Dual Output Buffers >2kV ESD Protection (Human Body Model) Ordering Information PART TEMP RANGE PIN-PACKAGE MAX9389EHJ -40C to +85C 32 TQFP MAX9389ETJ* -40C to +85C 32 Thin QFN *Future product--contact factory for availability. Applications Functional Diagram High-Speed Telecom and Datacom Applications Central-Office Backplane Clock Distribution D0 DSLAM/DLC D0 MAX9389 D1 Pin Configurations VEE Q0 Q0 VCC Q1 Q1 VCC SEL2 TOP VIEW 32 31 30 29 28 27 26 25 D1 D2 VCC D2 VEE D3 Q0 D3 VCC 1 24 SEL1 VBB2 2 23 SEL0 VBB1 3 MUX 8:1 D4 Q0 D4 Q1 D5 Q1 22 VCC D5 D0 D0 21 D7 4 MAX9389 5 20 D7 VBB1 D6 VBB2 D6 D1 6 19 D6 D7 D1 7 18 D6 D7 VCC 8 17 VEE VCC 10 11 12 13 14 15 16 D2 D2 D3 D3 D4 D4 D5 D5 SEL0 9 232k 180k SEL1 D_ D_ SEL2 165k TQFP VEE 180k 180k VEE Pin Configurations continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX9389 General Description The MAX9389 is a fully differential, high-speed, low-jitter, 8-to-1 ECL/PECL multiplexer (mux) with dual output buffers. The device is designed for clock and data distribution applications, and features extremely low propagation delay (310ps typ) and output-to-output skew (30ps max). MAX9389 Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers ABSOLUTE MAXIMUM RATINGS VCC - VEE ..............................................................-0.3V to +6.0V Inputs (D_, D_, SEL_) to VEE ......................-0.3V to (VCC + 0.3V) D_ to D_...............................................................................3.0V Continuous Output Current .................................................50mA Surge Output Current........................................................100mA VBB_ Sink/Source Current ..............................................600A Continuous Power Dissipation (TA = +70C) 32-Lead TQFP (derate 13.1mW/C above +70C) ...1047mW JA in Still Air..........................................................+76C/W JC .........................................................................+25C/W 32-Lead QFN (derate 21.3mW/C above +70C) .....1702mW JA in Still Air..........................................................+47C/W JC ...........................................................................+2C/W Operating Temperature Range ...........................-40C to +85C Junction Temperature ......................................................+150C Storage Temperature Range .............................-65C to +150C ESD Protection Human Body Model (D_, D_, Q_, Q_, SEL_, VBB_) .............2kV Soldering Temperature (10s) ...........................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS (VCC - VEE = 2.375V to 5.5V, outputs loaded with 50 1% to VCC - 2V. Typical values are at VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, unless otherwise noted.) (Notes 1-4) PARAMETER SYMBOL CONDITIONS -40C MIN TYP +25C MAX MIN TYP +85C MAX MIN TYP MAX UNITS INPUT (D_, D_, SEL_) Single-Ended Input High Voltage VIH VBB_ connected to the unused input, Figure 1 VCC 1.225 VCC 0.880 VCC 1.225 VCC 0.880 VCC 1.225 VCC 0.880 V Single-Ended Input Low Voltage VIL VBB_ connected to the unused input, Figure 1 VCC 1.945 VCC 1.625 VCC 1.945 VCC 1.625 VCC 1.945 VCC 1.625 V Differential Input High Voltage VIHD Figure 1 VEE + 1.2 VCC VEE + 1.2 VCC VEE + 1.2 VCC V Differential Input Low Voltage VILD Figure 1 VEE VCC 0.095 VEE VCC 0.095 VEE VCC 0.095 V VCC VEE 0.095 VCC VEE 0.095 VIHD VILD VCC - VEE < 3.0V 0.095 Differential Input Voltage VCC VEE VCC - VEE 3.0V 0.095 3.000 0.095 3.000 0.095 3.000 -60 +60 -60 +60 -60 +60 A VCC 1.145 VCC 0.895 VCC 1.145 VCC 0.895 VCC 1.145 VCC 0.895 V Input Current IIN Figure 1 VIH, VIL, VIHD, VILD V OUTPUT (Q_, Q_) Single-Ended Output High Voltage 2 VOH Figure 2 _______________________________________________________________________________________ Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers (VCC - VEE = 2.375V to 5.5V, outputs loaded with 50 1% to VCC - 2V. Typical values are at VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, unless otherwise noted.) (Notes 1-4) +25C SYMBOL Single-Ended Output Low Voltage VOL Figure 2 VCC 1.945 VOH VOL Figure 2 650 830 VCC 1.525 VCC 1.425 VCC 1.325 50 70 Differential Output Voltage CONDITIONS -40C PARAMETER MIN TYP MAX MIN VCC 1.695 VCC 1.945 TYP +85C MAX MIN VCC 1.695 VCC 1.945 650 840 VCC 1.525 VCC 1.425 VCC 1.325 53 70 TYP MAX VCC 1.695 UNITS V 650 840 mV VCC 1.525 VCC 1.425 VCC 1.325 V 55 70 mA REFERENCE OUTPUT (VBB_ ) Reference Voltage Output VBB1 VBB2 IBB1 + IBB2 = 0.5mA (Note 5) POWER SUPPLY Supply Current IEE (Note 6) AC ELECTRICAL CHARACTERISTICS (VCC - VEE = 2.375V to 5.5V, outputs loaded with 50 1% to VCC - 2V, VIHD - VILD = 0.15V to 1V, fIN 2.5GHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%). Typical values are at VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, fIN = 622 MHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%.)) (Note 7) PARAMETER SYMBOL CONDITIONS -40C +25C +85C UNITS MIN TYP MAX MIN TYP MAX MIN TYP MAX 216 301 370 237 310 416 255 329 456 ps 1.34 2 1.25 2 1.44 2 ns Differential Inputto-Output Delay tPLHD, tPHLD Figure 2 SEL_-to-Output Delay tPLH2, tPHL2 Figure 4, input transition time = 500ps (20% to 80%) (Note 8) Output-to-Output Skew tSKOO Figure 5 (Note 9) 15 15 30 ps Input-to-Output Skew tSKIO Figure 6 (Note 10) 50 50 55 ps Part-to-Part Skew tSKPP (Note 11) 125 150 160 ps Added Random Jitter (Note 12) Added Deterministic Jitter (Note 12) tRJ TDJ fIN = 156MHz Clock fIN = 622MHz pattern fIN = 2.5GHz PRBS 223 - 1 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 0.3 1.15 fIN = 156Mbps 33 95 33 95 33 95 fIN = 622Mbps 21 61 21 61 21 61 psRMS psP-P _______________________________________________________________________________________ 3 MAX9389 DC ELECTRICAL CHARACTERISTICS (continued) Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers MAX9389 AC ELECTRICAL CHARACTERISTICS (continued) (VCC - VEE = 2.375V to 5.5V, outputs loaded with 50 1% to VCC - 2V, VIHD - VILD = 0.15V to 1V, fIN 2.5GHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%). Typical values are at VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, fIN = 622 MHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%.)) (Note 7) PARAMETER SYMBOL -40C CONDITIONS MIN TYP +25C MAX MIN TYP +85C MAX MIN TYP MAX UNITS Switching Frequency fMAX VOH - VOL 300mV, Figure 2 2.7 2.7 2.7 GHz Select Toggle Frequency fSEL VOH - VOL 300mV, Figure 4 100 100 100 MHz Output Rise and Fall Time (20% to 80%) tR, tF Figure 2 67 105 138 74 117 155 81 128 165 ps Note 1: Measurements are made with the device in thermal equilibrium. Note 2: Current into an I/O pin is defined as positive. Current out of an I/O pin is defined as negative. Note 3: DC parameters production tested at TA = +25C and guaranteed by design over the full operating temperature range. Note 4: Single-ended data input operation using VBB_ is limited to (VCC - VEE) 3.0V. Note 5: Use VBB_ only for inputs that are on the same device as the VBB_ reference. Note 6: All pins open except VCC and VEE. Note 7: Guaranteed by design and characterization. Limits are set at 6 sigma. Note 8: Measured from the 50% point of the input signal with the 50% point equal to VBB, to the 50% point of the output signal. Note 9: Measured between outputs of the same part at the signal crossing points for a same-edge transition. Note 10: Measured between input-to-output paths of the same part at the signal crossing points for a same-edge transition of the differential input signal. Note 11: Measured between outputs of different parts at the signal crossing points under identical conditions for a same-edge transition. Note 12: Device jitter added to the differential input signal. Typical Operating Characteristics (VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, outputs loaded with 50 1% to VCC - 2V, fIN = 622MHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%), unless otherwise noted.) 55.0 52.5 50.0 47.5 45.0 42.5 -40 -15 10 35 TEMPERATURE (C) 4 700 600 500 400 60 85 MAX9389 toc03 MAX9389 toc02 800 140 130 120 FALL 110 RISE 100 300 90 200 40.0 150 RISE/FALL TIME (ps) SUPPLY CURRENT (mA) 57.5 900 DIFFERENTIAL OUTPUT VOLTAGE (mV) ALL PINS ARE OPEN EXCEPT VCC AND VEE MAX9389 toc01 60.0 OUTPUT RISE/FALL TIME vs. TEMPERATURE DIFFERENTIAL OUTPUT VOLTAGE (VOH - VOL) vs. FREQUENCY SUPPLY CURRENT vs. TEMPERATURE 0 0.5 1.0 1.5 2.0 FREQUENCY (GHz) 2.5 3.0 -40 -15 10 35 TEMPERATURE (C) _______________________________________________________________________________________ 60 85 Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers PROPAGATION DELAY vs. HIGH VOLTAGE OF DIFFERENTIAL INPUT (VIHD) 308 292 276 330 MAX9389 toc05 324 PROPAGATION DELAY vs. TEMPERATURE 350 MAX9389 toc04 VIHD - VILD = 150mV PROPAGATION DELAY (ps) PROPAGATION DELAY (ps) 340 tPHL 310 tPLH 290 270 260 250 1.2 1.5 1.8 2.1 2.4 2.7 VIHD (V) 3.0 3.3 -40 -15 10 35 60 85 TEMPERATURE (C) Pin Description PIN NAME FUNCTION 1, 8, 22, 26, 29 VCC Positive Supply Input. Bypass each VCC to VEE with 0.1F and 0.01F ceramic capacitors. Place the capacitors as close to the device as possible with the smaller value capacitor closest to the device. 2 VBB2 Reference Output Voltage 2. Connect to the inverting or noninverting data input to provide a reference for single-ended operation. When used, bypass VBB2 to VCC with a 0.01F ceramic capacitor. Otherwise leave open. 3 VBB1 Reference Output Voltage 1. Connect to the inverting or noninverting data input to provide a reference for single-ended operation. When used, bypass VBB1 to VCC with a 0.01F ceramic capacitor. Otherwise leave open. 4 D0 Noninverting Differential Input 0. Internal 232k to VCC and 180k to VEE. 5 D0 Inverting Differential Input 0. Internal 180k to VCC and 180k to VEE. 6 D1 Noninverting Differential Input 1. Internal 232k to VCC and 180k to VEE. 7 D1 Inverting Differential Input 1. Internal 180k to VCC and 180k to VEE. Noninverting Differential Input 2. Internal 232k to VCC and 180k to VEE. 9 D2 10 D2 Inverting Differential Input 2. Internal 180k to VCC and 180k to VEE. 11 D3 Noninverting Differential Input 3. Internal 232k to VCC and 180k to VEE. 12 D3 Inverting Differential Input 3. Internal 180k to VCC and 180k to VEE. 13 D4 Noninverting Differential Input 4. Internal 232k to VCC and 180k to VEE. 14 D4 Inverting Differential Input 4. Internal 180k to VCC and 180k to VEE. 15 D5 Noninverting Differential Input 5. Internal 232k to VCC and 180k to VEE. 16 D5 Inverting Differential Input 5. Internal 180k to VCC and 180k to VEE. 17, 32 VEE Negative Supply Input 18 D6 Noninverting Differential Input 6. Internal 232k to VCC and 180k to VEE. 19 D6 Inverting Differential Input 6. Internal 180k to VCC and 180k to VEE. _______________________________________________________________________________________ 5 MAX9389 Typical Operating Characteristics (continued) (VCC - VEE = 3.3V, VIHD = VCC - 1V, VILD = VCC - 1.5V, outputs loaded with 50 1% to VCC - 2V, fIN = 622MHz, input duty cycle = 50%, input transition time = 125ps (20% to 80%), unless otherwise noted.) Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers MAX9389 Pin Description (continued) PIN NAME 20 D7 Noninverting Differential Input 7. Internal 232k to VCC and 180k to VEE. FUNCTION 21 D7 Inverting Differential Input 7. Internal 180k to VCC and 180k to VEE. 23 SEL0 Select Logic Input 0. Internal 165k pulldown to VEE. 24 SEL1 Select Logic Input 1. Internal 165k pulldown to VEE. 25 SEL2 27 Q1 Inverting Output 1. Typically terminate with 50 resistor to VCC - 2V. 28 Q1 Noninverting Output 1. Typically terminate with 50 resistor to VCC - 2V. Select Logic Input 2. Internal 165k pulldown to VEE. 30 Q0 Inverting Output 0. Typically terminate with 50 resistor to VCC - 2V. 31 Q0 Noninverting Output 0. Typically terminate with 50 resistor to VCC - 2V. -- EP Exposed Pad (QFN Package Only). Connect to VEE. VIHD D_ VIHD - VILD VCC VCC VIHD (MAX) tPLHD VIHD - VILD VILD (MAX) VILD D_ VIH Q_ VIL Q_ tPHLD VOH VBB VOH - VOL VIHD (MIN) VOL VIHD - VILD VILD (MIN) VEE DIFFERENTIAL INPUT VOLTAGE DEFINITION 80% VEE SINGLE-ENDED INPUT VOLTAGE DEFINITION 80% VOH - VOL DIFFERENTIAL OUTPUT WAVEFORM 0V (DIFFERENTIAL) VOH - VOL 20% 20% Q_ - Q_ tR tF Figure 2. Differential Input-to-Output Propagation Delay Timing Diagram Figure 1. Input Definitions VIHD D_, D1 VIH D_ WHEN D_ = VBB VBB VIHD - VILD VILD D_, D1 OR VIH VBB VIL D_ WHEN D_ = VBB tPLH1 tPHL1 VOH Q_ Figure 3. Single-Ended Input-to-Output Propagation Delay Timing Diagram 6 VIL tPLH2 tPHL2 VOH Q_ VOH - VOL Q_ VBB SEL_ = VIL OR OPEN SELO VOH - VOL VOL Q_ VOL Figure 4. Select Input (SEL0) to Output (Q_, Q_) Delay Timing Diagram _______________________________________________________________________________________ Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers MAX9389 D0 D0 Q0 Q0 Q0 Q0 tPLHD* tPHLD* tPLHD** tPHLD** D1-D7 Q1 D1-D7 Q1 Q0 tSKOO tSKOO Q0 tSKIO = | tPLHD* - tPLHD** | OR | tPHLD* - tPHLD** | Figure 5. Output-to-Output Skew (tSKOO) Definition Detailed Description The MAX9389 is a fully differential, high-speed, low-jitter 8-to-1 ECL/PECL mux with dual output buffers. The device is designed for clock and data distribution applications, and features extremely low propagation delay (310ps typ) and output-to-output skew (30ps max). Three single-ended select inputs, SEL0, SEL1, and SEL2, control the mux function (see Table 1). The mux select inputs are compatible with ECL/PECL logic, and are internally referenced to the on-chip reference output (VBB1, VBB2), nominally VCC - 1.425V. The select inputs accept signals between VCC and VEE. Internal 165k pulldowns to VEE ensure a low default condition if the select inputs are left open. Leaving SEL0, SEL1, and SEL2 open selects the D0, D0 inputs by default. The differential inputs D_, D_ can be configured to accept a single-ended signal when the unused complementary input is connected to the on-chip reference voltage (VBB1, VBB2). Voltage reference outputs VBB1 and VBB2 provide the reference voltage needed for single-ended operations. A single-ended input of at least VBB_ 100mV or a differential input of at least 100mV switches the outputs to the VOH and VOL levels specified in the DC Electrical Characteristics table. The maximum magnitude of the differential input from D_ to D_ is 3.0V. This limit also applies to the difference between a single-ended input and any reference voltage input. Figure 6. Input-to-Output Skew (tSKIO) Definition Table 1. Mux Select Input Truth Table DATA OUTPUT SEL0 SEL1 SEL2 D0* L or open L or open L or open D1 H L or open L or open D2 L or open H L or open D3 H H L or open D4 L or open L or open H D5 H L or open H D6 L or open H H D7 H H H *Default output when SEL0, SEL1, and SEL2 are left open. Single-Ended Operation The recommended supply voltage for single-ended operation is 3.0V to 3.8V. The differential inputs (D_, D_) can be configured to accept single-ended inputs when operating at supply voltages greater than 2.725V. In single-ended mode operation, the unused complementary input needs to be connected to the on-chip reference voltage, VBB1 or VBB2, as a reference. For example, the differential D_, D_ inputs are converted to a noninverting, single-ended input by connecting VBB1 or VBB2 to D_ and connecting the single-ended input to D_. Similarly, an inverting input is obtained by connecting V BB1 or V BB2 to D_ and connecting the singleended input to D_. The single-ended input can be driven to V CC or V EE or with a single-ended LVPECL/LVECL signal. _______________________________________________________________________________________ 7 Q0 Q0 VCC Q1 Q1 VCC SEL2 30 29 28 27 26 25 TOP VIEW VEE Output Termination Terminate each output with a 50 to VCC - 2V or use an equivalent Thevenin termination. Terminate each Q_ and Q_ output with identical termination for minimal distortion. When a single-ended signal is taken from the differential output, terminate both Q_ and Q_. Pin Configurations (continued) 31 Applications Information Traces Circuit board trace layout is very important to maintain the signal integrity of high-speed differential signals. Maintaining integrity is accomplished in part by reducing signal reflections and skew, and increasing commonmode noise immunity. Signal reflections are caused by discontinuities in the 50 characteristic impedance of the traces. Avoid discontinuities by maintaining the distance between differential traces, not using sharp corners or using vias. Maintaining distance between the traces also increases common-mode noise immunity. Reducing signal skew is accomplished by matching the electrical length of the differential traces. 32 In single-ended operation, ensure that the supply voltage (VCC -VEE) is greater than 2.725V. The input high minimum level must be at least (VEE + 1.2V) or higher for proper operation. The reference voltage VBB must be at least (VEE + 1.2V) because it becomes the highlevel input when a single-ended input swings below it. The minimum VBB output for the MAX9389 is (VCC 1.525V). Substituting the minimum VBB output for (VBB = VEE + 1.2V) results in a minimum supply (VCC - VEE) of 2.725V. Rounding up to standard supplies gives the recommended single-ended operating supply ranges (VCC - VEE) of 3.0V to 5.5V. When using the VBB reference output, bypass it with a 0.01F ceramic capacitor to VCC. If VBB is not being used, leave it unconnected. The VBB reference can source or sink a total of 0.5mA (shared between VBB1 and VBB2), which is sufficient to drive eight inputs. VCC 1 24 SEL1 VBB2 2 23 SEL0 Ensure that the output current does not exceed the current limits specified in the Absolute Maximum Ratings table. Under all operating conditions, the device's total thermal limits should not be exceeded. VBB1 3 22 VCC D0 4 21 D7 D0 5 20 D7 D1 6 19 D6 Supply Bypassing D1 7 18 D6 Bypass each VCC to VEE with high-frequency surfacemount ceramic 0.1F and 0.01F capacitors. For PECL, bypass each VCC to VEE. For ECL, bypass each VEE to VCC. Place the capacitors as close to the device as possible with the 0.01F capacitor closest to the device pins. Use multiple vias when connecting the bypass capacitors to ground. When using the VBB1 or VBB2 reference outputs, bypass each one with a 0.01F ceramic capacitor to VCC. If the VBB1 or VBB2 reference outputs are not used, they can be left open. VCC 8 17 VEE 14 15 16 D4 D5 D5 12 D3 13 11 D3 D4 9 10 D2 MAX9389 D2 MAX9389 Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers THIN QFN NOTE: VEE IS CONNECTED TO THE UNDERSIDE METAL SLUG. Chip Information TRANSISTOR COUNT: 716 PROCESS: Bipolar 8 _______________________________________________________________________________________ Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers 32L TQFP, 5x5x01.0.EPS _______________________________________________________________________________________ 9 MAX9389 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) D2 0.15 C A D b CL 0.10 M C A B D2/2 D/2 PIN # 1 I.D. QFN THIN.EPS MAX9389 Differential 8:1 ECL/PECL Multiplexer with Dual Output Buffers k 0.15 C B PIN # 1 I.D. 0.35x45 E/2 E2/2 CL (NE-1) X e E E2 k L DETAIL A e (ND-1) X e CL CL L L e e 0.10 C A C 0.08 C A1 A3 PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE 16, 20, 28, 32L, QFN THIN, 5x5x0.8 mm APPROVAL COMMON DIMENSIONS DOCUMENT CONTROL NO. REV. 21-0140 C 1 2 EXPOSED PAD VARIATIONS NOTES: 1. DIMENSIONING & TOLERANCING CONFORM TO ASME Y14.5M-1994. 2. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES ARE IN DEGREES. 3. N IS THE TOTAL NUMBER OF TERMINALS. 4. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012. DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE TERMINAL #1 IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE. 5. DIMENSION b APPLIES TO METALLIZED TERMINAL AND IS MEASURED BETWEEN 0.25 mm AND 0.30 mm FROM TERMINAL TIP. 6. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY. 7. DEPOPULATION IS POSSIBLE IN A SYMMETRICAL FASHION. 8. COPLANARITY APPLIES TO THE EXPOSED HEAT SINK SLUG AS WELL AS THE TERMINALS. 9. DRAWING CONFORMS TO JEDEC MO220. 10. WARPAGE SHALL NOT EXCEED 0.10 mm. PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE 16, 20, 28, 32L, QFN THIN, 5x5x0.8 mm APPROVAL DOCUMENT CONTROL NO. REV. 21-0140 C 2 2 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.