Environmental
Connectors
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Printed in U.S.A.
www.glenair.com
CAGE CODE 06324
© 2010 Glenair, Inc.
E-Mail: sales@glenair.com
D-6
D
Crimp Tools and Accessories
Crimp Tool And Positioner For #12 and #16 Power Contacts
1
2
1 Crimp tool for use with size #16 and #12 power
pins. 9.75 inches OAL, 1.25 pounds. Use with
M39029/57 and /58 contacts and 809-093 adapters.
Figure Military Part Number Daniels Part Number Tool Code
M/- AF A
M/- TH B
2 Positioner for use with size #12 and #16
Power contacts.
These crimp tools perform precision eight indent crimps for gas-tight wire terminations and excellent
tensile strength. Adjustment wheel has 8 settings. Ratchet mechanism prevents improper crimps.
Use with bayonet-type positioners. Check calibration with M22520/3 gages. Length is 6.75 inches,
weight is approx. 10 oz.
Glenair
Part Number Military Part Number
Daniels Part
Number Tool Code
809-015 M/- AFM C
11 Standard M22520/2-01 miniature crimper. Use with standard size #20 and #22D contacts and
with M39029/76, /77 and /78 coaxial center contacts. Requires positioner, ordered separately.
2 Positioner for M39029/76, 77 and 78 coaxial
inner contact. Use with 809-015 crimp tool.
Coax/
Power
Contact
Size
Military Part
Number
Daniels Part
Number Notes
Tool
Code
Power # M/- K Series I, II, III and IV D
Power #D M/- K Series I, II, III and IV Pin E
Power #D M/- K Series I, III and IV Socket F
Power #D M/- K Series II Socket G
Coax # M/- K- Series I, II, III and IV H
Coax # M/- K Series I, II, III and IV I
Quadrax # M/- K Quadrax Inner Contact J
Miniature Adjustable Crimp Tool
2
#8 Quadrax Contacts for Glenair Series 257-455 and 257-459 Connectors
Contact
Size Type Glenair
Part Number
Military
Part Number
Tool
Code
Cable Type
Dash No.
Wire
Size Sample Contact
#8
Quadrax
854-001
N/A C, J (Inner)
K, M (Outer)
01 - Tensolite NF26Q100
02 - Tensolite NF24Q100
03 - Draka Fileca F 4704-6
04 - Draka Fileca F 4704-4
26AWG
24AWG
26AWG
24AWG
854-002
Consult factory for PC tail/other cable options
Environmental
Connectors
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
Printed in U.S.A.
www.glenair.com
CAGE CODE 06324
© 2010 Glenair, Inc.
E-Mail: sales@glenair.com
D-7
D
Crimp Tools and Accessories
Crimp Tool And Positioner For #16 Coaxial Outer Contact
1
2
For crimping size #16 shield sleeves. These mil spec approved tools feature a ratchet mechanism to
prevent damage from overcrimping. Check calibration with M22520/3 gage.
1 Crimp tool for use with size #16 coaxial
contacts. Blue handles. 9.75 inches OAL, 1.25
Figure
Glenair
Part Number
Military Part
Number
Daniels Part
Number Tool Code
809-127 M/- GS- Q
809-126 M/- GP R
2 Positioner for use with size #16 coaxial
contacts. Use with 809-127 (M22520/4-01)
crimp tool.
Parallel Action Crimp Tool and Hex Die Set
1 Parallel action tool for use with hex crimp dies.
11 inches OAL, 2.0 pounds. Anodized aluminum
frame, steel mechanism, plastic handles. Includes tool
for die set removal. Accepts all M22520/5 die sets.
Figure
Glenair
Part Number
Military Part
Number
Daniels Part
Number Tool Code
809-129 M/- HX K
809-130 M/- Y L
859-007 M/- Y M
2 Die set for terminating coaxial shield to
outer contact. Use with size #12 matched
impedance M39029/102 and 103 type coaxial
contacts. Set consists of upper and lower halves.
Made of hardened steel with black oxide nish.
Approximately 2 inches in length, assembled.
Die set has two closures per illustration.
1
1
2
2 Positioner for use with size #12 coaxial
contacts. Use with 809-133 (M22520/31-01)
crimp tool.
Figure
Glenair
Part Number
Military Part
Number
Daniels Part
Number Tool Code
809-133 M/- GS- N
809-134 M/- GP P
1 Crimp tool for use with size #12 coaxial
contacts. Black handles. 9.75 inches OAL,
1.25 pounds.
Crimp Tool And Positioner For #12 Coaxial Outer Contact
For crimping size #12 shield sleeves. These mil spec approved tools feature a ratchet mechanism to
prevent damage from overcrimping. Check calibration with M22520/3 gage.
3
2
