10 9 8 7 6 5 4 3 2 4 C D RO.51 TYP 6.10 +0.38 1.27 | = |+ A+| 3.05 hit | CLOSED SLOT A j } ! f 01.1440.05 TYP [635 8.89 MOLEX IRELAND PRODUCTION ONLY { ] | (OPTION) $b [2.54] I { 2.5440,05 254| : 2.54+0,05 TYP E (NON-ACCUM) a] L/- 4.11 RECOMMENDED PCB HOLE LAYOUT 6.10 0.38 LEGEND: 70247 -* % * CKT SIZE ] Z\PLATING OPT. SLOT (OPTIONAL) | Ir [ SECTION E-E = I | 31810081 _| L 2.54 0.644005 TYP =| Adele 039 AT TIPS BOTH ENDS = Ss Ss QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =SS] |sympocs| (UNLESS SPECIFIED) MM_ ONLY NTS METRIC | CleRoveECTION = = = mm INCH DRAWN BY DATE TITLE ms SS SiZ\\G/-0 [PLACESHE---[$-- VENNIFER 1987/09/21 C-GRID, SHROUDED HEADER 3 F 3 PLACES|+--- +--- CHECKED BY DATE R/A a &ING/=0 [2 PLACES 0.20 [4 MAL ~ 1787/09/21 (SLOTTED W/O STANDOFFS) 1 OS +=/4 1 PLACE JE--- 4-7-7 an AS = \G/=0 ANGULAR + 3 LONG 2011/12/07 iKaldx MOLEX INCORPORATED x S = a = MATERIAL NO. DOCUMENT NO. SHEET NO. go EEe DRAFT WHERE APPLICABLE] SEE TABLE SDA-70247-*x00-04 1 OF 2 20 G5 =< WITH? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX J3_ s JA SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 | 6 | 5 | 4 | 3 | 2 Fi Rev. F 2009/06/1840 9 8 7 6 5 4 3 | 2 4 PART ckKT] 0M DIM DIM DIM NUMBER SIZE A B C D 70247-08xx | 08 | 7.62 | 14.73 | 17.78 | 15,24 NOTES: F SIN BUSHOUT FORCE (9072K)/2LBS MIN 70247-10xx | 10 | 1016 | 17.27 | 20.32 | 17.78 1 . . - 12 2. PIN SOLDERABILITY PER MOLEX SPEC. ES-152. T0247 - Tan 12.70 | 19.81 | 22.86 | 20.32 3. PRODUCT SPEC: PS-70246-100 APPLIES. 70247-14xx | 14 | 15.24 | 22.35 | 25.40 | 22.86 4. WAFER TO BE FLAT WITHIN .003 MM/MM. 70247-16xx | 16 17.78 | 2489 | 27.94 | 25.40 5. DIMENSIONS FOR PLATING LOCATION: 70247-20xx | 20 | 22.86 | 29.97 | 33.02 | 30.48 Ade ASURE POINT FOR THICKNESS 70247-24xx | 24 | 27.94 | 35.05 | 3810 | 35.56 VINMUM COVERAGE 70247-26x | 26 | 30.48 | 3759 | 40.64 | 38.10 Ad 70247-30x | 30 | 3556 | 4267 | 45.72 | 43718 E J GOLD END OF PIN UNLESS OVERALL PLATED. 70247-3hxx | 34 | 4064 | 4775 | 50.80 | 48.26 Z-AFINISH: - 51:15 MICRO INCHES MIN GOLD PLATE ON CONTACT AND 70247-40xx | 40 | 48.26 | 55.37 | 58.42 | 55.88 75 MICRO INCHES MIN TIN PLATE ON SOLDERTAIL BOTH OVER 50 MICRO INCHES MIN NICKEL OVERALL. 70247-44nw | 44 | 53.34 | 60.45 | 63.50 | 60.96 52 : 30 MICRO INCHES MIN GOLD PLATE ON CONTACT AND 20267 -A8ex | 46 | 58.62 | 6553 | 0898 | 66.04 75 MICRO INCHES MIN TIN PLATE ON SOLDERTAIL 70247-50xx | 50 | 60.96 | 68.07 | 71.12 | 68.58 BOTH OVER 50 MICRO INCHES MIN NICKEL OVERALL. 70247-56xx | 56 | 6858 | 75.69 | 78.74 | 76.20 - 54:5 MICRO INCHES MIN GOLD PLATE ON CONTACT AND 70247-60% | 60 | 73.66 | 80.77 | 83.82 | 81.28 D 75 MICRO INCHES MIN TIN PLATE ON SOLDERTALL. 70247-64%x | 64 | 78.74 | 85.85 | 88.90 | 86.36 BOTH OVER 50 MICRO INCHES MIN NICKEL OVERALL. 70247-72xx | 72 | 88.90 | 96.01} 99.06 | 96.52 CHECK WITH SALES OFFICE FOR AVAILABILITY. DIM AT THE CENTRE OF THE SHROUDED WALL SHALL BE 5.91MM MIN, THIS SPEC IS VALID FOR ALL CKT SIZE, 40, MATERIAL: HSG: PBT, GLASS FILLED, UL94V-0, COLOUR: BLACK PIN: 0.64MM SQ. PIN PHOSPHOR BRONZE. c AN SOLDERTAIL POSITION TOLERANCE TO BE GAUGED. 12, PACKAGING SPECIFICATION: PK-87835-001. B = Ss Ss QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =SS] |sympo_s| (UNLESS SPECIFIED) MM ONLY NTS METRIC | Cl PROJECTION See mm INCH __| DRAWN BY DATE THLE = F 3 PLACES|+--- +--- CHECKED BY DATE R/A Wo 5 \W/0 2 PLACES|+0.20 [+--- LAI 1987/09/21 (SLOTTED W/O STANDOFEFS) rog_=/H 1 PLACE IE--- |--- APPROVED BY DATE A 6 Be ol WO Hons ortit2io7| ele ~=MOLEX INCORPORATED a 3 2Ar MATERIAL NO. DOCUMENT NO. SHEET NO. Boete DRAFT WHERE APPLICABLE] SEE TABLE SDA-70247-*x00-04 2 OF 2 <0 <I WITH? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX J3 ig A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 | 6 | 5 | 4 | 3 | 2 Fi Rev. F 2009/06/18