DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
DSEC-XX-XX-X-XX.X-X-RA-TR
BOARD
SPACING
-05.5: 5.5mm
-07.0: 7.0mm
*-08.5: 8.5mm
(* = NOT TOOLED)
PLATING SPECIFICATION
-S:
30µ”
SELECTIVE GOLD, MATTE TIN ON TAILS
(USE SUB-IM-C-256-XX.X-S-X)
-L: 1
0µ”
SELECTIVE GOLD, MATTE TIN ON TAILS
(USE SUB-IM-C-256-XX.X-L-X)
SOLDER TAIL LEAD STYLE
-01: 1.57[.062]
-02: 2.36[.093]
No OF POSITIONS
-30,-40,-50 (PER ROW)
SOLDER COMPOSTION & STYLE
-1: 63% TIN / 37% LEAD CHARGE TAIL
(USE SUB-IM-C-256-XX.X-X-1)
-2: 96.5% TIN / 3.5% SILVER
LEAD FREE CHARGE TAIL
(USE SUB-IM-C-256-XX.X-X-2)
RIGHT ANGLE
-RA
TAPE & REEL
(STANDARD PACKAGING)
(SEE NOTE 4)
"E"
(REF)
12.96
(REF)
.510
12.96 .510
TO WAFER
"A"
"A"
C
L
WT-16-XX-T
(4 PLCS)
C
2.15 .085
"F"
(ROW HEIGHT)
"D"
0.64 .025
(REF) (TYP)
"B" (REF)
1.75
(REF)
.069
"G"
(REF)
"A"
0.80
(TYP)
.031
(TOL NON-ACCUM)
0.80 .031
"A"
PIN 02 TOP SLOT
PIN 01 BOTTOM SLOT
DSEC-XX-01-RA-XX.X
C
C
C
C
C
BOTTOM
SLOT
TOP
SLOT
PIN 02 BOTTOM SLOT
PIN 01 TOP SLOT
"C"
(REF) (A-PIN CTRS.)
6.00
(REF)
.236
1.69
(REF)
.067
1.32
(REF)
.052
1.10
(REF)
.043
PIN 01
PIN 04
9.00 .354
8.32
(REF)
1.32
(REF)
.052
2.15 .085
0.64
(REF) (TYP)
.025
1.15
(REF)
.045
3.85 .152
0.38
.015
(REF)
C
C
C
BOARD SPACING
APPLICATION VIEW
(DSEC-30-01-05.5-X-RA)
BOTTOM
CARD
TOP CARD
FIG 1
(DSEC-30-01-05.5-X-RA)
(SOME DETAIL OMITTED FOR CLARITY)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
0.8mm PITCH RIGHT ANGLE ASSEMBLY
BY:
DSEC-XX-XX-X-XX.X-X-RA-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
8/4/08
2
1
SHEET SCALE: 2:1
INSULATOR: VECTRA E130i
CONTACT: PHOS BRONZE
F:\DWG\MISC\MKTG\DSEC-XX-XX-X-XX.X-X-RA-TR-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2.
MINIMUM PUSHOUT FORCE: 2.22N[.5 LB].
3. INSPECT DIMENSION AT 4 CORNERS OF PART.
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER,
TRAILER OR REEL WILL BE SUPPLIED
FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR
TRAILER WILL BE SUPPLIED
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION D
1.66
(REF)
.065
9.00 .354
(REF)
"H"
(TYP)
2.05 .081
1.00 .039
(REF)
"F" (REF)
1.27 .050
(3 PLCS)
1.33
(REF)
.052
2.16
(REF)
.085
1.02
±0.10
.040
±.004
'B'
SECTION "A"-"A"
SCALE 6 : 1
(VIEW ROTATED 90
CCW FOR CLARITY)
SUB-IM-C-256-XX.X-X-X
DSEC-XX-01-RA-XX.X
C
C
C
0.05 .002
(SEE NOTE 3)
"C" "C"
DETAIL 'B'
SCALE 12 : 1
(ONE SOLDER CHARGE REMOVED TO SHOW CONTACT TAIL)
C
C
C
0.15 [.006]
0.38 .015
(REF)
SECTION "C"-"C"
SCALE 12 : 1
SHEET OF
0.8mm PITCH RIGHT ANGLE ASSEMBLY
BY:
DSEC-XX-XX-X-XX.X-X-RA-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
8/4/08
2
2
SHEET SCALE: 2:1
REVISION D
F:\DWG\MISC\MKTG\DSEC-XX-XX-X-XX.X-X-RA-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322