DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] REVISION D "E" (REF) DO NOT SCALE FROM THIS PRINT DSEC-XX-XX-X-XX.X-X-RA-TR No OF POSITIONS -30,-40,-50 (PER ROW) "A" TAPE & REEL (STANDARD PACKAGING) (SEE NOTE 4) SOLDER TAIL LEAD STYLE -01: 1.57[.062] -02: 2.36[.093] 12.96 .510 TO WAFER C PLATING SPECIFICATION -S: 30" SELECTIVE GOLD, MATTE TIN ON TAILS (USE SUB-IM-C-256-XX.X-S-X) -L: 10" SELECTIVE GOLD, MATTE TIN ON TAILS (USE SUB-IM-C-256-XX.X-L-X) BOARD SPACING -05.5: 5.5mm -07.0: 7.0mm *-08.5: 8.5mm (* = NOT TOOLED) 12.96 .510 (REF) "A" CL RIGHT ANGLE -RA WT-16-XX-T (4 PLCS) SOLDER COMPOSTION & STYLE -1: 63% TIN / 37% LEAD CHARGE TAIL (USE SUB-IM-C-256-XX.X-X-1) -2: 96.5% TIN / 3.5% SILVER LEAD FREE CHARGE TAIL (USE SUB-IM-C-256-XX.X-X-2) "B" (REF) C 0.80 .031 (TYP) (TOL NON-ACCUM) C "A" PIN 02 TOP SLOT DSEC-XX-01-RA-XX.X 1.75 .069 (REF) PIN 01 TOP SLOT TOP SLOT 0.38 .015 (REF) "F" (ROW HEIGHT) "G" (REF) BOTTOM SLOT 8.32 (REF) PIN 02 BOTTOM SLOT 2.15 .085 2.15 .085 0.80 .031 1.15 .045 (REF) C 0.64 .025 (REF) (TYP) C C "A" PIN 01 BOTTOM SLOT C 3.85 .152 0.64 .025 (REF) (TYP) NOTES: "D" 1.32 .052 (REF) 9.00 .354 C 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: 2.22N[.5 LB]. 3. INSPECT DIMENSION AT 4 CORNERS OF PART. 4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER OR REEL WILL BE SUPPLIED FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED "C" (REF) (A-PIN CTRS.) 1.69 .067 (REF) TOP CARD BOARD SPACING 6.00 .236 (REF) 1.10 .043 (REF) BOTTOM CARD PIN 01 1.32 .052 (REF) FIG 1 (DSEC-30-01-05.5-X-RA) (SOME DETAIL OMITTED FOR CLARITY) PIN 04 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS [INCHES]. TOLERANCES ARE: DECIMALS ANGLES X.X: 0.3 [.01] 2 X.XX: 0.13 [.005] X.XXX: 0.051 [.0020] MATERIAL: APPLICATION VIEW (DSEC-30-01-05.5-X-RA) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: VECTRA E130i CONTACT: PHOS BRONZE SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm PITCH RIGHT ANGLE ASSEMBLY DWG. NO. DSEC-XX-XX-X-XX.X-X-RA-TR F:\DWG\MISC\MKTG\DSEC-XX-XX-X-XX.X-X-RA-TR-MKT.SLDDRW BY: KNOWLDEN 8/4/08 SHEET 1 OF 2 REVISION D 1.33 .052 (REF) 1.66 .065 (REF) 2.16 .085 (REF) DSEC-XX-01-RA-XX.X C 1.020.10 .040.004 SUB-IM-C-256-XX.X-X-X "F" (REF) 'B' C C 1.00 .039 (REF) "H"(TYP) 0.15 [.006] "C" "C" 0.05 .002 (SEE NOTE 3) C C 1.27 .050 (3 PLCS) DETAIL 'B' SCALE 12 : 1 2.05 .081 C (ONE SOLDER CHARGE REMOVED TO SHOW CONTACT TAIL) 9.00 .354 (REF) 0.38 .015 (REF) SECTION "A"-"A" SCALE 6 : 1 (VIEW ROTATED 90 CCW FOR CLARITY) SECTION "C"-"C" SCALE 12 : 1 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 F:\DWG\MISC\MKTG\DSEC-XX-XX-X-XX.X-X-RA-TR-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8mm PITCH RIGHT ANGLE ASSEMBLY DWG. NO. DSEC-XX-XX-X-XX.X-X-RA-TR BY: KNOWLDEN 8/4/08 SHEET 2 OF 2